2020 Jeep Gladiator

Instrument cluster gauge panel. It doesn't work, and other gladiator models have been recalled for the same issues. Issues with radio, have taken it in many times for same issues and nothing changed, wiring doesn't work properly under seats and on driver door. The green busbox was faulty from factory, can't have glove box in due to interfering with wires behide it.

The digital instrument cluster in my 2020 Jeep Gladiator has failed. The center display (LCD) went completely black, even though the backlight still glows faintly. This screen typically displays critical information such as vehicle speed, warnings, messages, and alerts. Without this display, I cannot monitor key safety information while driving. The analog gauges still function, but the central digital panel remains blank regardless of ignition mode (RUN or ON). After diagnosing the issue myself, I confirmed power was present at the fuse terminals. I inspected and replaced fuse F36, which was damaged and likely contributed to the display losing power or shorting. I also inspected related fuses F43 and F57 (BCM and IOD power supply), which were intact. This is not an isolated problem. Research shows that other Jeep Gladiator owners (especially 2020 models) are experiencing identical symptoms — black instrument displays, “Push Brake to Start” messages that stay on after shutdown, and modules not entering proper sleep mode. These issues align with the symptoms listed in TSB 08-002-21A, which relates to software and communication faults between the BCM and IPC. Jeep dealership confirmed the failure and quoted $700–$1,000 for full cluster replacement, stating there are no DTC codes and no reflash updates available, and that the cluster must be replaced outright. Jeep has not issued a recall, yet this is clearly a widespread failure affecting visibility and safety of vehicle operation. The problem poses a safety risk to myself and others. I cannot see alerts or diagnostic messages while driving. If this happened at night or during highway travel, it could increase accident risk. Jeep should issue a recall or warranty coverage extension for the instrument cluster failure in affected 2020 Gladiators.

The information screen in the instrument cluster between the speedometer and tachometer went blank. Sometimes it will light up blue or even function. The screen is the display for fuel, temperature, odometer, gear selected, etc. From what I have read this happens to many of these vehicles. The fix dealers are using is to use remanufactured parts which are back ordered with no known date of delivery. I am informed the remanufactured part is about $500 not including labor. The vehicle will run and drive, however I won't know how much gas I have, I don't know if the vehicle is overheating, and I don't know how many miles I have traveled without trying to track it. If I want the new part to have an accurate odometer I have to leave it with the dealer for an unknown period of time. This seems potentially unsafe and likely to impact many vehicles given that the part is remanufactured and back ordered. A systemic flaw of this nature seems like something which could warrant a safety recall.

The Instrument Panel Cluster has failed and is blank rendering the vehicle unsafe to drive as vital information is not being presented to the driver. Despite this Jeep Gladiator having been produced and sold in 2020, Stellantis Recall and Customer Service Departments are claiming that the VIN does not indicate there is Recall coverage despite the 2019-2024 NHTSA Safety Recall for this known failure. see: [XXX] The local dealer, Hilltop Jeep, in Richmond, CA has confirmed the failure of the Instrument Panel. Stellantis is not willing to remedy the problem. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Instrument panel cluster stopped working. Therefore, I do not know my speed, how much gas I have, if my car is in four-wheel-drive, tire, pressure, and many other notifications that are located in this instrument panel I went to CMA Jeep dealer in Martinsburg West Virginia, they did verify that this instrument panel cluster was the issue, but they said this my vin was not under the recall. I’m confused as to why there’s no recall on this particular vin when clearly its and issue, but other 2020 jeep gladiators there is a recall on this particular part. Why is my Jeep not part of this recall.

When driving over 50 mph and hit a small bump the jeep goes to shacking "death wobble". I have taken it to the dealership where I had purchased it, and they looked and stated it was a recall. This was back in March 2024. Here it is end of October 2024 and still waiting on the part to be shipped to the dealer ship so it can be fixed. It is unsafe to drive as it is. And is my only vehicle. What is taking so long on the parts

IPC Instrument Panel Cluster started on/off in the digital dash screen since Wednesday morning but coming back to my Moms house it went off. I was able to drive my vehicle back, parked. I got stomach sickness until Sunday I went to turned on vehicle and it didn't started. Now it got me confused. Is it the IPC or the batteries? Vehicle opens, locks but didn't started. Plan on calling authorized dealer for Jeep since I changed the battery this past year for shutting off, think like December 2023. Hopefully, it gets resolved but it might been the IPC since a few vehicles including Gladiator model from 2020 was included. NHTSA Recall number 24V652000. Also Manufacturer Recall Number: 30B fyi.