The side mirror amber lights warning of a vehicle in the blind spot randomly illuminate and remain on for upwards of an hour or upon turning the vehicle off and back on. The dash randomly notifies me that the forward collision warning isn't available and both side mirror blind spot warning lights illuminate for upwards of an hou…
Read full complaint
The side mirror amber lights warning of a vehicle in the blind spot randomly illuminate and remain on for upwards of an hour or upon turning the vehicle off and back on. The dash randomly notifies me that the forward collision warning isn't available and both side mirror blind spot warning lights illuminate for upwards of an hour or until I turn off and restart the vehicle. The Dash randomly goes blank and doesn't display any information such as speed, RPM, warnings etc.
NHTSA ODI #11723437
Mileage unknown · Nov 21, 2024
Electrical SystemForward Collision Avoidance
Went to go leave for work and my instrument cluster was completely blank. Was unable to see odometer, CELs, sensors, fuel levels, etc. The cluster never turned back on. I was finally able to get it into a dealer to confirm that the cluster and the gateway module were locked up. The mileage on the vehicle is just over 61,000.
NHTSA ODI #11626747
Mileage unknown · Oct 8, 2024
Electrical SystemForward Collision Avoidance
While driving under normal, clear road conditions, my center gauge cluster display went black. I have checked my fuses (both fuses that are assigned to the instrument cluster, both were functioning as designed) and disconnected the negative battery terminal to allow the system to reset with negative results. This puts my vehicle…
Read full complaint
While driving under normal, clear road conditions, my center gauge cluster display went black. I have checked my fuses (both fuses that are assigned to the instrument cluster, both were functioning as designed) and disconnected the negative battery terminal to allow the system to reset with negative results. This puts my vehicle, and others, is an unsafe position because I am unable to tell anything about certain critical vehicle data such as engine temperature, fuel level, mileage, TMPS, etc. I have not taken the vehicle to the dealership yet because I don't feel comfortable driving it. There were no warning lights or problems prior to this issue presenting.
NHTSA ODI #11618687
Mileage unknown · Aug 11, 2024
Back Over PreventionElectrical SystemForward Collision Avoidance
The back up camera freezes and the radio freezes. It won’t turn off until you turn the jeep off and start it up again. The camera will stay frozen with a blue screen I have tons of documented videos but unfortunately this program won’t allow uploads of videos.
NHTSA ODI #11607872
Mileage unknown · Jun 8, 2021
Forward Collision AvoidanceVehicle Speed Control
I was driving, accelerating into heavy traffic, and just about to go under an overpass (sunny day), when the Forward Collision System activated and hard-braked me to a stop, nearly causing an accident with the vehicle behind me. Although there was a car in front of me, it was not close and there was no danger of a collision (it…
Read full complaint
I was driving, accelerating into heavy traffic, and just about to go under an overpass (sunny day), when the Forward Collision System activated and hard-braked me to a stop, nearly causing an accident with the vehicle behind me. Although there was a car in front of me, it was not close and there was no danger of a collision (it was accelerating). Worse, no warnings came from the system until it started braking. This has happened several times, always in heavy traffic, and always on a underpass or lower bridge deck. I'm going to have to turn this system off, because I don't want to get rear-ended. My FCS is on the medium setting.
NHTSA ODI #11420182
5,000 miles · Apr 30, 2021
Forward Collision AvoidanceSuspension
ONE OR MORE OF THE SUSPENSION KITS SOLD BY ROCK KRAWLER USED INFERIOR MATERIALS IN THE CONTROL ARM BUSHINGS THAT WILL BREAK DOWN WITH THE USE OF HYDROCARBONS (GREASE) CAUSING SLOP/PLAY IN THEM WHICH COULD CAUSE ERRATIC AND OR LOSS OF STEERING CONTROL PARTICULARLY IN THE FRONT ARMS. THEIR ARMS REQUIRE THAT THEY BE GREASED PERIOD…
Read full complaint
ONE OR MORE OF THE SUSPENSION KITS SOLD BY ROCK KRAWLER USED INFERIOR MATERIALS IN THE CONTROL ARM BUSHINGS THAT WILL BREAK DOWN WITH THE USE OF HYDROCARBONS (GREASE) CAUSING SLOP/PLAY IN THEM WHICH COULD CAUSE ERRATIC AND OR LOSS OF STEERING CONTROL PARTICULARLY IN THE FRONT ARMS. THEIR ARMS REQUIRE THAT THEY BE GREASED PERIODICALLY AS ROUTINE MAINTENANCE. THEY DID NOT MAIL OUT ANY NOTICES TO THE CUSTOMERS THAT PRUCHASED THE DEFECTIVE ARMS BUT RATHER LEFT IT UP TO THE CONSUMERS TO FIND OUT ON THEIR OWN. THEY HAVE A VIDEO ON YOUTUBE AND A LINK ON THEIR WEBSITE IN REFERENCE TO A TSB #2 BUT UNAWARE CUSTOMERS MAY BE IN JEOPARDY WITH THE SAFETY OF THEIR LIVES OR OTHERS. THE BUSHINGS AS THEY STATE WERE SUPPLIED BY DAYSTAR. HERE IS A LINK TO THEIR WEBSITE LISTING THE TSB'S: HTTPS://ROCKKRAWLER.COM/TECHNICAL-SERVICE-BULLETINS/
SINCE PURCHASE THIS VEHICLE HAS HAD LOOSE AND UNRESPONSIVE STEERING. IT CURRENTLY HAS 1600 MILES AND HAS BEEN IN THE SHOP MULTIPLE TIMES. I AM TOLD THE STEERING GEAR NEEDS TO BE REPLACED UNDER A CAMPAIGN HOWEVER THERE IS NO DECAL AS OF YET. JEEP DOES NOT HAVE THE REQUIRED PARTS IN STOCK AND I AM BEING TOLD IT MAY BE MONTHS UNTIL…
Read full complaint
SINCE PURCHASE THIS VEHICLE HAS HAD LOOSE AND UNRESPONSIVE STEERING. IT CURRENTLY HAS 1600 MILES AND HAS BEEN IN THE SHOP MULTIPLE TIMES. I AM TOLD THE STEERING GEAR NEEDS TO BE REPLACED UNDER A CAMPAIGN HOWEVER THERE IS NO DECAL AS OF YET. JEEP DOES NOT HAVE THE REQUIRED PARTS IN STOCK AND I AM BEING TOLD IT MAY BE MONTHS UNTIL A REPAIR IS AVAILABLE FOR MY VEHICLE. I ALSO HAVE A PROBLEM WITH THE U CONNECT SYSTEM CRASHING WHICH ALSO CONTROLS MOST OF THE INTERIOR OF THE VEHICLE AND RENDERS MOST OF THOSE ITEMS LIKE THE HVAC INOPERABLE UNTIL THE SYSTEM IS RESET. BOTH OF THESE ISSUES ARE CONSTANTLY PRESENT. THE STEERING ISSUE IS A NUSSINACE BELOW 40MPH AND NEARLY UNCONTROLLABLE AT HIGHWAY SPEEDS. I FEEL COMPLETELY UNSAFE IN THE VEHICLE. THE STEERING WHEEL SITS APPROX 15-20 DEGREES TO THE LEFT TO GO STRAIGHT AND YOU CAN MOVE THE WHEEL THE SAME DISTANCE TO THE RIGHT BEFORE IT REACTS. TO MAINTAIN A STRAIGHT LINE YOU MUST CONSTANTLY OVER CORRECT THE WHEEL.
Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."
Consequence & remedy
Consequence: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.
Remedy: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.
Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence & remedy
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence & remedy
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Consequence & remedy
Consequence: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Additional source detail variants (2)
Seat Belts:front:retractor
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Consequence: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Seat Belts
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Consequence: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence & remedy
Consequence: The lingering rearview image can distract the driver, increasing the risk of a crash.
Remedy: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence & remedy
Consequence: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator vehicles. The rear driveshafts may have been incorrectly assembled without grease in the monoblock joint.
Consequence & remedy
Consequence: A joint without grease may overheat and seize, possibly causing the driveshaft to fracture, resulting in a sudden loss of drive power. If the driveshaft completely separates from the vehicle it may become a road hazard. Either of these scenarios can increase the risk of a crash.
Remedy: FCA US will notify owners, and dealers will replace the driveshaft, free of charge. The recall began October 10, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US number for this recall is V95.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
PE25014 · Instrument Panel Cluster (ipc) Failure
Opened Oct 23, 2025 · No close date supplied
Status: open (inferred from source dates) · Electrical System: Instrument Cluster/panel
The Office of Defects Investigations (ODI) is opening a Preliminary Evaluation on 2020 Model Year Jeep Gladiators and Wranglers involving a malfunctioning Instrument Panel Clusters (IPC) resulting in the loss of important vehicle metrics and other status information. ODI has received 89 Vehicle Owner Questionnaires (VOQs) alleging a complete or partial loss of the IPC display while driving. The subject vehicles' IPC display includes the speedometer, fuel gauge, engine temperature, turn signal indicators, warning light, and other gauges that are normally illuminated while the vehicle is in operation. Loss of the fuel gauge while driving may lead to an inability to determine the fuel level and result in a loss of motive power, and the loss of other safety-related information may impede a driver’s ability to take action to prevent a safety risk. Furthermore, an IPC that is suddenly not visible to the driver may divert the driver’s attention from the driving task, potentially causing a vehicle crash. ODI is opening this Preliminary Evaluation to evaluate the scope, severity and frequency of the alleged IPC malfunctions and to assess potential safety-related consequences. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov
2020 Jeep Gladiator Problems, Complaints & Recalls | Skip That Year