2020 Jeep Gladiator

The digital instrument cluster on my 2020 Jeep Gladiator has been completely nonfunctional since late November 2024. This failure means I cannot see the odometer, digital speedometer, and all other vehicle status indicators displayed through the cluster. The problem has been confirmed by an authorized Jeep dealership, which has been unable to secure a replacement part due to a reported supply shortage. Jeep corporate has had this case escalated for months without resolution. As a result, I have been driving without these essential instruments for over 8 months, with no timeline provided and no workaround. In addition to the loss of fuel and mileage visibility (and potentially odometer functionality), I also cannot confirm whether the cruise control is active. This could cause potential safety risks during highway travel. There were no warning lights or error messages prior to the failure. The cluster simply went dark. The faulty component is still in the vehicle and available for inspection. Jeep is aware of the issue, and a case is currently open.

The contact owns a 2020 Jeep Gladiator. The contact stated that while attempting to start the vehicle, the instrument panel failed to operate as intended and was inoperable. There was no warning light illuminated. The vehicle was taken to a local dealer and was inspected. The contact was informed that the instrument panel was faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 60,000.

The contact owns a 2020 Jeep Gladiator. The contact stated while driving 35 MPH, the instrument panel failed to display critical safety information or provide illumination for any warning lights. The vehicle was not taken to the dealer to be diagnosed. The vehicle was not repaired. The VIN was not included in NHTSA Campaign Number: 24V652000 (ELECTRICAL SYSTEM). The manufacturer was notified of the failure and referred the contact to NHTSA Hotline to report the failure. The failure mileage was 44,300.

This is in relation to 24V – 652. I know this has been a recall for other models built in the same year, but the recall is not on my particular Jeep for some reason. I am having the exact same issue. The instrument cluster panel has gone out and does not work and needs to be replaced. It is the same issue that is being had with a 3.5 screen, but it is now happening on the Rubicon edition, and it is not under the recall which does not make any sense. Can you please help me with this

The 7" Instrument Panel Cluster (IPC) began flickering constantly in January 2025 then stopped turning on altogether in May 2025. A similar issue led to safety recalls for Jeep Gladiators and Wranglers with 3.5" IPCs. This is much more concerning for owners with 7" IPCs, as these versions do not have analog temperature and fuel gauges. A dealership (Bayside King George, VA) first observed the flickering when test driving the vehicle after performing the last safety recall. I have not brought the vehicle back since the display stopped turning on because dealerships regularly charge ~$2,000 and hold the vehicle for an extended period to fix this with a replacement IPC. Losing the digital speedometer and ability to observe what speed the cruise control is set to, fluid temperatures, tire pressure, and battery voltage is very concerning, and it is puzzling why Jeeps with 7" IPCs, which are harmed more due to this fault, were excluded from this recall. While searching forums about this issue, it was apparent that this was a widespread issue for Wranglers and Gladiators with 7" IPCs.

While driving in rush hour traffic, stop and go driving, a service shifter message started to intermittently appear, then the forward collision warning message started to frequently chime in and off, then I lost power steering, check engine light illuminated, other messages auto start stop service, service sway bar disconnect, transmission was stuck in 3rd gear then after a stop it would not shift out of 1st even switching to manual shift mode, was able to pull over to side of road. Turned off the vehicle, used my code reader to clear the codes, started the vehicle back on and everything was clear and vehicle drove as normal. Sure glad it didn’t happen at speed! I have read of other people having the same issue so I wanted it to add my concern as well.

On [XXX], the cluster of my 2020 Gladiator JT turned black. After searching similar issues online, I found that there is an NHTSA Recall Number: 24V-652, Manufacturer Recall Number: 30B that affects Models: 2020–2024 Jeep Gladiator. The Issue is summarized as follow: " The IPC may experience an internal short circuit, leading to a blank screen. This malfunction prevents the display of critical information such as speed, fuel level, and warning indicators, posing a safety risk". This is exactly what I am experiencing with my car. I entered my VIN number [XXX] on the NHTSA website but my car has no recalls. I'd like to file a formal request to have this VIN number included in the recall so I can get this issue fixed rapidly. This is a safety hazard as it distract the driver's attention and is in violation of federal motor vehicle standard 101. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)