IllustrationMy airbag light came on and is flashing, I also have no horn
2010 Infiniti QX56
Owner reports · Recalls · Investigations
Fewer warning signs than most model years
Owner complaints for the 2010 Infiniti QX56 are lower than the model-year median of 55.
About this comparison →How this year compares
Owner complaints by model year
Compare all QX56 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 19 of 25 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Steering. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
2 crash reports0 fire reports2 injury reports
Electrical System complaints
3 reportsTL* THE CONTACT OWNS A 2010 INFINITI QX56. THE CONTACT STATED THAT WHILE DRIVING 40 MPH, THE VEHICLE STALLED. THE CONTACT RESTARTED THE VEHICLE AND THE CHECK ENGINE WARNING LIGHT WAS ILLUMINATED. THE VEHICLE WAS TAKEN TO THE DEALER FOR INSPECTION WHERE THEY STATED THAT THE ICC SENSOR NEEDED TO BE REPLACED. THE VEHICLE WAS NOT RE…
Read full complaint
TL* THE CONTACT OWNS A 2010 INFINITI QX56. THE CONTACT STATED THAT WHILE DRIVING 40 MPH, THE VEHICLE STALLED. THE CONTACT RESTARTED THE VEHICLE AND THE CHECK ENGINE WARNING LIGHT WAS ILLUMINATED. THE VEHICLE WAS TAKEN TO THE DEALER FOR INSPECTION WHERE THEY STATED THAT THE ICC SENSOR NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 82,000.
TL* THE CONTACT OWNS A 2010 INFINITI QX56. THE CONTACT STATED THAT ALL OF THE INSTRUMENT PANEL LIGHTS ILLUMINATED OAS THE VEHICLE STALLED. THE CONTACT CALLED ROAD SIDE ASSISTANCE BUT THEY WERE UNABLE TO GET THE VEHICLE STARTED. THE VEHICLE WAS TOWED TO THE DEALER AND INSPECTED. THE DEALER WAS ABLE TO RESTART THE VEHICLE AND ADVI…
Read full complaint
TL* THE CONTACT OWNS A 2010 INFINITI QX56. THE CONTACT STATED THAT ALL OF THE INSTRUMENT PANEL LIGHTS ILLUMINATED OAS THE VEHICLE STALLED. THE CONTACT CALLED ROAD SIDE ASSISTANCE BUT THEY WERE UNABLE TO GET THE VEHICLE STARTED. THE VEHICLE WAS TOWED TO THE DEALER AND INSPECTED. THE DEALER WAS ABLE TO RESTART THE VEHICLE AND ADVISED THE CONTACT THAT THERE WAS NOTHING WRONG WITH THE VEHICLE. THE VIN WAS NOT AVAILABLE. THE FAILURE AND THE CURRENT MILEAGE WAS 42,000.
Official recalls
210V208000 · Suspension:front:control Arm:lower Arm
May 14, 2010
NISSAN IS RECALLING CERTAIN MODEL YEAR 2010 TITAN, ARMADA, QX56, FRONTIER, XTERRA, AND PATHFINDER VEHICLES MANUFACTURED FROM NOVEMBER 19, 2009 THROUGH MARCH 3, 2010. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.
Consequence & remedy
Consequence: IF THE COLLAR WELD SEPARATES, THE VEHICLE HANDLING WILL DETERIORATE, POSSIBLY RESULTING IN A VEHICLE CRASH.
Remedy: NISSAN WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 20, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
10V072000 · Service Brakes, Hydraulic:pedals And Linkages
Mar 2, 2010
NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.
Consequence & remedy
Consequence: THE DRIVER WILL EXPERIENCE UNUSUAL AND NOTICEABLE LOOSENESS IN THE PEDAL AND A REDUCTION IN BRAKING FORCE INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT TO SEE IF THE PIVOT PIN HAD BEEN FORMED PROPERLY AND WILL REPLACE THE BRAKE PEDAL ASSEMBLY IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 22, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.