2015 Infiniti Q50

The valve body on these cars are useless. Driving down a highway and cant shift out of 3rd gear almost had a car re-end me. Today I am driving and the ECU is not responding I see the check engine light on then I'm like not again. This would be the 3rd valve body I replaced. First I replaced the whole transmission thinking that is what I needed and advised that the valve body and the transmission are one. Yet no they come in parts. Anyways today I am waiting to get home, but the car is not reading my key fob why? Then the ECU and code U0100 is popping up. Something new and turns the car off. The shifting that happen earlier was just a light bulb of I already knew what is wrong. I felt the car shift with a hunch so I looked at my dash board and saw the check engine light again and was like not again. Please not again. Now on the dash board I see AWD and chassis issue. Then online I am told electrical problem and or ECU module not reading correctly. Like what is up with these push to starts. They are becoming a headache. I need to know just why I am replacing my valve body now for the 4th time???? This all can cause an accident that my car randomly slows down.

The car just slowed down super fast on freeway almost got rear ended. It would not go past 3rd gear. Poor acceleration. Could have caused a huge accident. I got it diagnosed and they said it is valve body/speed sensor/tcm and they said this is a COMMON problem for 2015 Q50. I replaced this part 2 years ago and here we go again. Shop diagnosed and said this tcm (transmission control module which is in the transmission) but they have to change whole transmission. Everything happened all the sudden then check engine light came on.

Power steering failed while driving in parking lot looking for parking spot. Unable to turn wheel without hitting parked car. I was able to drive to end of the lot where there were less cars. Noticed that I was able to turn wheel so long as didn’t step on brakes. The steering wheel was also off alignment. This happed on a Saturday evening, next day car was fine all the warning were off. Spoke to service person explained what happened. He basically said if the car is running fine they can check it out but may not find the problem. Since the car was running fine until it wasn’t. Car was parked in garage turned on the car all warning lights go on. Made appointment for 4/3/24 drove car to dealership which is not to far. The warning lights still on and no power steering. Analysis many DTC codes found related to this system:B2512 4WAS SIG: C1B9000 DAST SYSTEM: C1138 4WAS CIRCUIT & C1A04 ABS/TCS/VDC CIRC. Correction Recommended to perform DAST calibration first before performing further diagnosis. COST $539.15 . They also did Multi-Point Inspection items requiring immediate attention Engine Air Filter COST $94.99 GRAND TOTAL $641.64 out of pocket. 4/3/24 picked up car. On that evening drove the car and as I’m pulling up on drive way power steering goes out again. I managed to get the car in garage. Once I’m in push button to close garage doesn’t work and car dies no power at all. Able to get car started by playing with battery cables. On dealership notes car was there 30 miles ago. Now they say wrong battery size. That battery was replaced by them on 2/28/22. Also the battery just past Multi-Point 2 days ago.New battery cost $232.78 now out of pocket $874.42.This is now 4/10/24. Drove that evening and front splash guard fall off had to tie wrap to hold whatever pieces are left. Took it to dealership they took no responsibility. I will need to replace it. I have all my receipts from them they are the only ones who have worked on my vehicle.

My car started acting weird, fob wasn’t working correctly, doors repeatedly lock nonstop and drained battery. I took to Infiniti and they said it’s water damage from my sunroof drains. It damaged my BCM. Infiniti has quoted me 3,700 dollars to fix. I’ve done lots of research and this seems to be a very common problem with the Infiniti q50 models. I believe this is a manufactured defect. This could of left me stranded because car wouldn’t crank.

My car would not accelerate over 40 mph randomly after work. Once i noticed and tried to shift to a lower gear the car did not shift gears at all. When these things first happened there was no indicator lights on. The next morning the check engine light came on and the code pulled was P0720. After finding a repair shop to look further into the issue I was advised the car needed a new transmission to fix the issue. $4,000+ for the repair and as i google the issue I see that this is a common issue and it seems to always happen unexpectedly side note: also should be a recall on driver side blend door.. i almost died this summer due to cold air only blowing on one side in the middle of summer in 100• degree weather.

The contact owns a 2015 Infiniti Q50. The contact stated that while driving at highway speeds, the vehicle inadvertently slowed down. The vehicle failed to accelerate. The check engine warning light was illuminated. The vehicle was towed to the local dealer where it was diagnosed that a valve body replacement was needed. The vehicle was not repaired. The manufacturer was contacted, and the contact was informed that the vehicle was not covered under warranty. The failure mileage was approximately 56,000.

My Car Suddenly Stopped In The Middle Of The Road With A Check Engine Light. I Have a P0720 & P0500 Codes Indicating A Vehicle Speed Sensor & Output Speed Sensor Failed While Operating . This Cause My Transmission To Fail And Not Shifting. I Am On My Way To The Dealer Now . Hopefully Infiniti Will Do The Right Thing And Fix It . At 56,000 Miles A Transmission Should Not Fail . Unexpectedly Almost Causing A Car Collision . No Prior Warning Was Provided By The Car . The Car Just Suddenly Failed . This Is A Very Serious Safety Concern .

It seem as the chassis control system continues to fail even after I had the entire system replaced at Austin Infiniti. It seem as it is electrical that doesn't occur all the time but occurs randomly even while driving. It make the steering lock up after a stiff pull at random times then cause all the other system to act up such as the collision or lane departure. It states error code chassis control system and Infiniti each time after taking it back for a warranty job they decline after having footage that I take when the error occurs with my steering wheel in a different angle for forward driving. This is why I am writing this if it can resolve others who have ran into this occurrences when Austin Infiniti has told me they have ran into this before for another customer but luckily they car was under the manufacturer warranty and mine carshield. Will be dropping off again in March for my appointment since it seem to be coming on more often hoping the warranty company can inspect the error this time to repair it.