VEHICLE IS A 2002 HONDA GOLDWING GL1800 MOTORCYCLE. WHEN APPLYING THE REAR BRAKE, IT CAUSES THE ENTIRE MOTORCYCLE TO VIOLENTLY SHUDDER. THE SHUDDER WORSENS AS THE AMBIENT AIR TEMPERATURE RISES. DUE TO THE TECHNIQUE OF TURNING ON A MOTORCYCLE BY LEANING, THIS CAUSES A VERY SERIOUS SAFETY ISSUE. HONDA HAS TRIED APPROXIMATELY 4 FIX…
Read full complaint
VEHICLE IS A 2002 HONDA GOLDWING GL1800 MOTORCYCLE. WHEN APPLYING THE REAR BRAKE, IT CAUSES THE ENTIRE MOTORCYCLE TO VIOLENTLY SHUDDER. THE SHUDDER WORSENS AS THE AMBIENT AIR TEMPERATURE RISES. DUE TO THE TECHNIQUE OF TURNING ON A MOTORCYCLE BY LEANING, THIS CAUSES A VERY SERIOUS SAFETY ISSUE. HONDA HAS TRIED APPROXIMATELY 4 FIXES OVER THE PAST 2 YEARS, NONE HAVE WORKED. THEIR STANCE NOW IS THAT THE BRAKE SHUDDER IS INHERENT TO THIS PARTICULAR MOTORCYCLE AND THEIR "FIX" IS TO SIMPLY INSERT THAT STATEMENT INTO THE OWNER'S MANUALS GOING FORWARD. THAT IS TOTALLY UNACCEPTABLE. THE SHUDDER IS EASILY DUPLICATED ON MY MOTORCYCLE AND YOUR ENGINEERS ARE WELCOME (AND ENCOURAGED) TO SEE FOR THEMSELVES WHETHER THEY WOULD CONSIDER THIS TO BE ACCEPTABLE. I DO KNOW SEVERAL OTHER OWNERS HAVE THIS PROBLEM.
American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.
Consequence & remedy
Consequence: A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.
Remedy: Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
Consequence & remedy
Consequence: THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT AND, IF NECESSARY, REINFORCE THE WELDS ON 2001-2002 MOTORCYCLES FREE OF CHARGE. ON 2003-2004 MOTORCYCLES, THE UNITS WILL BE REPAIRED, NO INSPECTION WILL BE NECESSARY. THE RECALL BEGAN ON FEBRUARY 9, 2005. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.
CERTAIN MOTORCYCLES EQUIPPED WITH COMBINED-BRAKE SYSTEMS HAVE A PROPORTIONING CONTROL VALVE (PCV) THAT MECHANICALLY PROPORTIONS BRAKE FORCE WHEN THE REAR BRAKE IS APPLIED. A SEAL IN SOME PCVS IS IMPROPERLY SHAPED, AND BRAKE FLUID LEAKAGE MAY OCCUR.
Consequence & remedy
Consequence: IF THE MOTORCYCLE CONTINUES TO BE USED AFTER A LEAK OCCURS, THE REAR BRAKE WOULD EVENTUALLY BECOME INOPERATIVE. A LOSS OF REAR BRAKE FORCE COULD INCREASE THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE REAR BRAKE FORLEAKAGE. IF LEAKAGE IS CONFIRMED, THE DEALER WILL REPLACE THE PCV FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 31, 2005. OWNERS MAY CONTACT HONDA AT 866-784-1870.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
Consequence & remedy
Consequence: THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONTACT HONDA AT 1-866-784-1870.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2002 Honda GL1800A Problems, Complaints & Recalls | Skip That Year
Illustration