MOTORCYCLE HAS GONE INTO THE "RED ZONE" ON THE GAUGE NUMEROUS TIMES SINCE THE FIRST TIME THAT I EXPEREINCED IT LAST SUMMER. IT DEFINITELY IS GETTING HOT, AS THE HEAT IS NOTICEABLE AND THE MOTORCYC WILL ALSO "MISS SHIFTS" WHILE RUNNING HOT. ORIGINALLY IT ONLY OCCURED WHEN I WOULD GET TRAPPED IN TRAFFIC AND WAS UNABLE TO EITHER ST…
Read full complaint
MOTORCYCLE HAS GONE INTO THE "RED ZONE" ON THE GAUGE NUMEROUS TIMES SINCE THE FIRST TIME THAT I EXPEREINCED IT LAST SUMMER. IT DEFINITELY IS GETTING HOT, AS THE HEAT IS NOTICEABLE AND THE MOTORCYC WILL ALSO "MISS SHIFTS" WHILE RUNNING HOT. ORIGINALLY IT ONLY OCCURED WHEN I WOULD GET TRAPPED IN TRAFFIC AND WAS UNABLE TO EITHER STOP OR GO FAST ENOUGH TO COOL DOWN THE MOTORCYCLE. IT HAS PROGRESSED AND I HAVE EXPERIENCED IT UNDER OTHER CONDITIONS, SUCH AS CLIMBING THE HILL TO CAVE OF THE WINDS IN COLORADO SPRINGS AND ON A GRADE AT 40 - 50 MPH SUSTAINED SPEED IN UTAH. ONCE MOTORCYCLE HAS COOLED DOWN THE SHIFTING RETURNS TO NORMAL, BUT THE MISSED SHIFTING SEEMS TO BE GETTING MORE AND MORE PRONOUNCED WHEN HOT. (OR MAYBE THE BIKE IS GETTING HOTTER.) I ASKED MY DEALER ABOUT THIS SITUATION LAST SUMMER AND AT THAT TIME THEY SAID THEY HAD NO PREVIOUS REPORTS OF THIS OCCURING. I HAVE NOT "PUKED COOLANT" THAT I KNOW OF, BUT SINCE THE BIKE DOES HAVE AN OVERFLOW RESERVOIR I AM NOT SURE THAT IT HAS NOT OCCURED. I ALSO HAVE NOT STOPPED OR WATCHED THE HIGHWAY BEHIND ME AS THIS WAS OCCURING. I WAS ABLE TO GET A PICTURE OF THE BIKE NEAR THE RED ZONE AT ABOUT 45 MPH, BUT I WAS NOT ABLE TO GET ANY AT THE RED ZONE AT THAT SPEED BECAUSE THE DAY THAT I TRIED WAS ALSO ONE OF THE DAYS THAT MY SPEEDOMETER WAS STICKING. SINCE THE BIKE WAS SHOWING 50 MPH WHILE STOPPPED - ACCORDING TO THE SPEEDO - IT SEEMED POINTLESS TO TRY TO TAKE A PICTURE. I HAVE NEVER TRIED TO GET THE BIKE TO OH, A MY DESIRE IS (WAS?) TO OWN THIS BIKE FOR MANY YEARS AND MANY MILES. I AM VERY DISAPPOINTED THAT HONDA REFUSES TO ACKNOWLEGDE THE PROBLEM. THE SURVEY ASKED ME IF I CONTACTED HONDA AND I ANSWERED YES. THE REALITY IS THAT I TRIED LAST SUMMER AND GOT TIRED OF WAITING ON THE PHONE - SO I DID CONTACT HONDA, BUT NEVER ACTUALLY SPOKE TO A HUMAN BEING. THERE HAVE BEEN NUMEROUS REPORTS OF THIS OCCURING TO OTHER OWNERS, SO I HAVE NOT TRIED AGAIN. I DID FILL OUT A REPORT ON THIS SITE LAST SUMMER, BUT I DO NOT SEE IT POSTED.*AK
CONSUMER STATES MOTORCYCLE WOBBLES AND VIBRATES BETWEEN SPEEDS OF 40-50 MPH. DEALER ALIGNED HANDLEBARS, REPLACED AND BALANCED TIRES, ALIGNED FRONT FORKS AND REPLACED STEERING HEAD BEARINGS, BUT VIBRATIONS STILL EXIST. BIKE UNDER WARRANTY. *TT
NHTSA ODI #566113
Mileage unknown · Oct 24, 2001
Power Train
WHILE WAITING AT A STOP SIGN OR LIGHT SPEEDOMETER WOULD BECOME STUCK AT A CERTAIN SPEED, EVEN IF MOTORCYCLE WAS NOT MOVING OR DOING THAT PARTICULAR SPEED. WOULD SUDDENLY JUMP BACK TO NORMAL SPEED. CONTACTED DEALER, AND WAS INFORMED PARTS FOR SPEEDOMETER WERE ON BACK ORDER. ANOTHER DEALERSHIP INDICATED THAT MANUFACTURER WAS TRYIN…
Read full complaint
WHILE WAITING AT A STOP SIGN OR LIGHT SPEEDOMETER WOULD BECOME STUCK AT A CERTAIN SPEED, EVEN IF MOTORCYCLE WAS NOT MOVING OR DOING THAT PARTICULAR SPEED. WOULD SUDDENLY JUMP BACK TO NORMAL SPEED. CONTACTED DEALER, AND WAS INFORMED PARTS FOR SPEEDOMETER WERE ON BACK ORDER. ANOTHER DEALERSHIP INDICATED THAT MANUFACTURER WAS TRYING TO FIX SPEEDOMETER.*AK CONSUMER STATES THE SPEEDOMETER HAS BEEN REPLACED, HOWEVER HAD BEEN LIMITED DUE TO LACK OF PARTS FROM HONDA. *SLC
NHTSA ODI #898130
Mileage unknown · Oct 23, 2001
Power Train
SPEEDOMETER STICKS AND DOES NOT REGISTER SPEED OF VEHICLE, THIS HAPPENS WHEN THE SUN IS ON THE SPEEDOMETER. IT WILL STICK AT ANY SPEED OR STAY ON ZERO.*AK
NHTSA ODI #753570
Mileage unknown · Oct 19, 2001
Power Train
SPEEDOMETER STICKS/FREEZES, WONT REGISTER SPEED. NOTIFIED DEALER OF FAILURE, STILL NO RESPONSE ON CORRECTIVE ACTIONS.
NHTSA ODI #753441
Mileage unknown · May 22, 2001
Engine And Engine CoolingPower TrainService Brakes, Hydraulic
WHILE DRIVING AT 65 MPH SOMETHING LET GO IN ENGINE, CAUSING REAR WHEEL AND BRAKES TO MALFUNCTION. DEALER WAS INSPECTING VEHICLE. *AK ALSO, THE CLUTCH PLATE CLIP AND RING SEAL FAILED CAUSING SMOKE FROM TAIL PIPES. *YH
American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.
Consequence & remedy
Consequence: A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.
Remedy: Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.
HONDA IS RECALLING CERTAIN MODEL YEAR 2001-2010, AND MODEL YEAR 2012 GL1800 GOLDWING MOTORCYCLES. UNDER CERTAIN CONDITIONS, THERE IS A POSSIBILITY THAT THE COMBINED BRAKING SYSTEM'S SECONDARY MASTER CYLINDER MAY CAUSE THE REAR BRAKE TO DRAG.
Consequence & remedy
Consequence: UNEXPECTED BRAKING INCREASES THE RISK OF A CRASH, AND RIDING THE MOTORCYCLE WITH THE REAR BRAKE DRAGGING MAY GENERATE ENOUGH HEAT TO CAUSE THE REAR BRAKE TO CATCH FIRE.
Remedy: HONDA WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE SECONDARY MASTER CYLINDER AND IF NECESSARY, REPLACE IT, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 6, 2012. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-866-784-1870.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
Consequence & remedy
Consequence: THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT AND, IF NECESSARY, REINFORCE THE WELDS ON 2001-2002 MOTORCYCLES FREE OF CHARGE. ON 2003-2004 MOTORCYCLES, THE UNITS WILL BE REPAIRED, NO INSPECTION WILL BE NECESSARY. THE RECALL BEGAN ON FEBRUARY 9, 2005. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.
VEHICLE DESCRIPTION: MOTORCYCLES EQUIPPED WITH A NEWLY DESIGNED ENGINE STOP SWITCH. THE ENGINE STOP SWITCH IS SENSITIVE TO ACCIDENTAL CONTACT OR STRONG JOLTING, SUCH AS HITTING A POTHOLE OR RIDING OVER RAILROAD TRACKS,WHICH COULD CAUSE THE ENGINE TO CUT OUT MOMENTARILY OR EVEN SHUT OFF.
Consequence & remedy
Consequence: SUDDEN LOSS OF ENGINE POWER COULD LEAD TO A CRASH.
Remedy: DEALERS WILL INSTALL A CONTACT PLATE, E-CLIP, AND 2 CONTACT PLATE SPRINGS. OWNER NOTIFICATION BEGAN APRIL 19, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-310-532-9811.
VEHICLE DESCRIPTION: MOTORCYCLES EQUIPPED WITH A NEWLY DESIGNED PULSE ROTOR. THE CRANKSHAFT PULSE ROTOR, A DEVICE USED FOR IGNITION TIMING, COULD FAIL AND CAUSE THE ENGINE TO STALL.
Consequence & remedy
Consequence: THIS SUDDEN LOSS OF ENGINE POWER COULD LEAD TO A CRASH.
Remedy: DEALERS WILL INSTALL A REDESIGNED PULSE ROTOR. OWNER NOTIFICATION BEGAN APRIL 19, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4
AQ12001 · Southern Honda Powersports
Opened May 14, 2012 · Closed May 13, 2013
Status: closed (inferred from source dates) · Unknown Or Other
NHTSA opened Audit Query (AQ) 12-001 to determine whether Southern Honda Powersports (Southern Honda) of Chattanooga, Tennessee, had complied with the requirements of the National Traffic and Motor Vehicle Safety Act, as amended, 49 U.S.C. Chapter 301 (Safety Act) and its implementing regulations. The Safety Act requires, among other things, that a motor vehicle or equipment manufacturer notify its dealers of defects related to motor vehicle safety and non-compliances with federal motor vehicle safety standards.In turn, a dealer may not sell and deliver a new vehicle subject to a recall unless the recall remedy has been performed.(see 49 U.S.C. 30120(i); 49 C.F.R. 573.11)NHTSA issued an information request to Southern Honda on May 14, 2012 to which they responded on July 6, 2012.NHTSA?s inquiry led it to believe that Southern Honda had failed to complete the requirements of five recalls that required inspections and/or repairs of motorcycles prior to their sale or delivery.NHTSA believes that 329 motorcycles affected by recalls had not been inspected and/or repaired prior to their sale and delivery between 2007 and 2012.The agency is unaware of any deaths or injuries involving these vehicles.NHTSA concluded that it had a potential civil penalty claim against Southern Honda for violations of the Safety Act.Southern Honda denied any violations of the Safety Act.In order to settle this matter, Southern Honda agreed to pay a civil penalty in the amount of $125,000, to be paid in five annual installments.This AQ is closed.
RQ04009 · Frame Crossmemeber Weld Failures
Opened Sep 21, 2004 · Closed Feb 2, 2005
Status: closed (inferred from source dates) · Structure:frame And Members
HONDA IS AMENDING THE SCOPE OF 03V-350 TO ADD 34,919 POTENTIALLY AFFECTED GL1800 GOLD WING MOTORCYCLES.THE INITIAL RECALL RANGE INCLUDED FRAMES MANUFACTURED WITH ONE OF A NUMBER OF WELDING PROCESSES.HONDA BELIEVED, ON THE BASIS OF DATA AVAILABLE AT THAT TIME, THAT ONLY THOSE GL'S BUILT WITH THAT ONE PROCESS WERE AT RISK OF FAILURE.WITH THE ORIGINAL RECALL (IN SEPTEMBER, 2003), HONDA INTRODUCED YET ANOTHER WELD PROCESS.SUBSEQUENTLY, HONDA BECAME AWARE OF INCIDENTS INVOLVING GL'S NOT INCLUDED IN THE ORIGINAL RECALL, BUILT USING ANOTHER EARLY WELDING PROCESS.THUS, HONDA HAS DECIDED TO RECALL ALL GL1800'S BUILT PRIOR TO SEPTEMBER 20, 2003 REGARDLESS OF WHAT WELD PROCESS WAS BEING USED AT THE TIME.THIS RECALL EXPANSION AFFECTS THE 2001, 2002, 2003 AND 2004 MODEL YEARS AND THE TOTAL NUMBER OF AFFECTED U.S. GL1800 MOTORCYCLES INCREASES FROM 8,196 TO 43,115.
PE03039 · Rear Suspension Collapse
Opened Aug 11, 2003 · Closed Oct 10, 2003
Status: closed (inferred from source dates) · Structure:frame And Members
THE SUBJECT MOTORCYCLES, INTRODUCED WITH THE 2001 MODEL YEAR, UTILIZE AN ALUMINUM FRAME INDIVIDUALLY WELDED BY HONDA EMPLOYEES IN THE COMPANY?S MARYSVILLE, OHIO ASSEMBLY PLANT.NHTSA/ODI OPENED THIS INVESTIGATION AFTER LEARNING THAT SOME 2002 MODEL YEAR GL1800?S WERE EXPERIENCING REAR SUSPENSION COLLAPSE WHEN THE LOWEST CROSSMEMBER WOULD COMPLETELY SEPARATE FROM THE FRAME.IT APPEARED THE CROSSMEMBER WAS SEPARATING DUE TO SUB-STANDARD WELDING OF THE CROSSMEMBER TO THE FRAME. ON SEPTEMBER 4, 2003 HONDA BRIEFED ODI STAFF AND ADVISED THAT THE SUBJECT WELD FAILURES RESULTED FROM A COMBINATION OF PRODUCTION LINE CHANGES THAT TOOK EFFECT ON MARCH 1, 2002.THESE CHANGES WERE:1) FEW, IF ANY, REINFORCING TIG WELDS APPLIED TO THE CROSSMEMBER MIG WELDS; 2) A RELATIVELY INEXPERIENCED WELDER BEGAN WELDING FRAMES AS OF THAT DATE; AND 3) A LESS ROBUST WELD QUALITY CONTROL INSPECTION WAS INTRODUCED.EFFECTIVE SEPTEMBER 11, 2002 HONDA ADDRESSED THESE ASSEMBLY LINE ISSUES.ON SEPTEMBER 16, 2003 HONDA ADVISED NHTSA/ODI THAT IT WAS CONDUCTING A SAFETY RECALL OF ALL MYR 2002/2003 GL1800?S BUILT FROM MARCH 1, 2002 THROUGH SEPTEMBER 10, 2002.THIS IS A WORLDWIDERECALL INVOLVING 9,521 MOTORCYCLES, OF WHICH 8,196 ARE IN THE UNITED STATES.FOR MORE INFORMATION CONCERNING BOTH HONDA?S SEPTEMBER 4TH BRIEFING AND THE RECALL, PLEASE REFER TO NHTSA?S OCTOBER 2, 2003 MEMO.BASED ON INFORMATION PROVIDED BY HONDA CONCERNING THE PRODUCTION LINE CHANGES; THE FIELD PERFORMANCE OF ALL 2001-2003 GL1800?S; AND NHTSA?S INDEPENDENT INFORMATION GATHERING ACTIVITIES; THE SCOPE OF HONDA?S RECALL APPEARS JUSTIFIED.ODI WILL CLOSELY MONITOR SUBJECT CROSSMEMBER WELD INTEGRITY FOR BIKES BUILT OUTSIDE THE RECALL SCOPE, AS WELL AS THE EFFECTIVENESS OF HONDA?S RECALL REMEDY FOR THOSE BIKES WITHIN IT, AND WILL TAKE ADDITIONAL ACTION IF WARRANTED BY FUTURE DEVELOPMENTS.
PE02077 · Motorcycle Coolant Spray Onto Rear Tire
Opened Oct 15, 2002 · Closed Mar 28, 2003
Status: closed (inferred from source dates) · Engine And Engine Cooling
SEE THE ATTACHED REPORT WITH ODI'SFINDINGS.
2001 Honda GL1800 Problems, Complaints & Recalls | Skip That Year
Illustration