← New search

2019 GMC Yukon

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2019 GMC Yukon do not stand out strongly from the model-year median of 103.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Yukon years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 16 of 54 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Engine. Review the 28 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Power Train. Review the 12 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 9 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports1 fire reports1 injury reports

Engine complaints

28 reports
Clear category filter
170,000 miles · Apr 25, 2025
Engine

The contact owns a 2019 GMC Yukon. The contact stated while driving at an undisclosed speed, there was an abnormal rattling sound coming from the engine compartment, prompting the contact to discontinue driving the vehicle. The check engine warning light was illuminated. The vehicle was taken to the dealer, who diagnosed a failu…

Read full complaint

The contact owns a 2019 GMC Yukon. The contact stated while driving at an undisclosed speed, there was an abnormal rattling sound coming from the engine compartment, prompting the contact to discontinue driving the vehicle. The check engine warning light was illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the cam shaft. The vehicle was repaired. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 170,000. The VIN was not available.

NHTSA ODI #11656753

Mileage unknown · Apr 24, 2025
Engine

Was driving home at highway speeds and my 2019 yukon denalis engine just shut off in traffic and had to come to a stop in the middle of traffic and it wouldn't restart, had to have it towed to dealer and they told me the engine was siezed.

NHTSA ODI #11656624

Mileage unknown · Jan 22, 2025
Engine

The car was clicking when it was first started up, a short time later it started to shake terribly which forced my [XXX] son who was driving the vehicle at the time to pull over, on a major toll-way in heavy traffic. Engine light started to blink and traction control light came on. I immediately took the car into the dealer and …

Read full complaint

The car was clicking when it was first started up, a short time later it started to shake terribly which forced my [XXX] son who was driving the vehicle at the time to pull over, on a major toll-way in heavy traffic. Engine light started to blink and traction control light came on. I immediately took the car into the dealer and was told I need new lifters ($3800 + Tax) and most likely a new engine (they quoted me $15,865). From what I am reading this issue is common place with the 6.2L engine...frightening and very lucky my son was not injured. I have filed a case with GMC - Case #[XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI #11637728

82,000 miles · May 28, 2024
EnginePower Train

The contact owns a 2019 GMC Yukon. The contact stated while driving at various speeds and depressing the accelerator pedal, the vehicle hesitated to respond and jolted while responding. There was no warning light illuminated. The vehicle was taken to the dealer and an independent mechanic; however, the failure could not be dupli…

Read full complaint

The contact owns a 2019 GMC Yukon. The contact stated while driving at various speeds and depressing the accelerator pedal, the vehicle hesitated to respond and jolted while responding. There was no warning light illuminated. The vehicle was taken to the dealer and an independent mechanic; however, the failure could not be duplicated. The contact stated while driving 65 MPH, the vehicle decelerated to 25 MPH independently while the RPMS were significantly high. The contact depressed the accelerator pedal, and the engine revved. The vehicle jolted and accelerated to 65 MPH; however, the failure recurred. The contact depressed the accelerator pedal and the vehicle resumed speed, then the vehicle jerked and lost motive power. The contact was able to pull to the side of the road. The contact restarted the vehicle and continued driving; however, the vehicle stalled. The contact pulled over to the emergency lane. The contact parked and restarted the vehicle. The contact was able to drive into a parking lot, where the failure recurred. The vehicle failed to restart with the check engine warning light illuminated. The messages "Transmission Hot - Idle Engine" and "Action Required" were displayed. The vehicle was towed to the residence. The dealer was notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 82,000.

NHTSA ODI #11591071

Mileage unknown · Apr 8, 2024
EngineUnknown Or Other

The engine continues to slip and slows down when driving. The following codes are returned back from the onstar diagnostics, Transmission Control Module Requested Malfunction Indicator Lamp Illumination. The DTC is an informational DTC. The DTC indicates an emission related DTC set in the Transmission Control Module. The vehicl…

Read full complaint

The engine continues to slip and slows down when driving. The following codes are returned back from the onstar diagnostics, Transmission Control Module Requested Malfunction Indicator Lamp Illumination. The DTC is an informational DTC. The DTC indicates an emission related DTC set in the Transmission Control Module. The vehicle has only 132,000 miles, and I have maitain the vehicle in excellent shape. With maitainance, the transmission should last at least 300,000 miles. The Engine and Transmission System is not performing as expected. An issue has been detected in the Transmission System that transfers power from the engine to the drive wheels.

NHTSA ODI #11581808

Mileage unknown · Jan 10, 2024
Engine

Engine Lifters failing and vehicle making a squeaking type noise. Check engine light came on briefly 2 weeks ago and went off. Problem confirmed by GMC dealer whom also reports they have multiple vehicles at shop right now with lifters and cam shaft problems

NHTSA ODI #11564707

Mileage unknown · Aug 7, 2022
Engine

The intake valve spring broke and destroyed the cylinder and engine. The damage was verified by a certified GMC dealer and submitted to GMC who said they would replace the engine under the warranty. No warnings or symptoms occurred prior to the total engine failure. The vehicle is under the 60000 warranty and has been at the …

Read full complaint

The intake valve spring broke and destroyed the cylinder and engine. The damage was verified by a certified GMC dealer and submitted to GMC who said they would replace the engine under the warranty. No warnings or symptoms occurred prior to the total engine failure. The vehicle is under the 60000 warranty and has been at the dealer for going on 7 months.

NHTSA ODI #11478011

2,000 miles · Jun 14, 2019
EngineInjury

TL* THE CONTACT OWNS A 2019 GMC YUKON. THE CONTACT STATED THAT WHILE OPERATING THE VEHICLE THE FRONT SEAT DRIVER AND PASSENGER HAD BECOME ILL AND SUFFERED DIZZINESS AND LIGHT HEADINESS AND THE PASSENGER ALSO SUFFER BREATHING PROBLEMS WHICH REQUIRED MEDICAL TREATMENT. THE VEHICLE WAS TAKEN TO THE LOCAL DEALER RIVERTOWN BUICK/GMC …

Read full complaint

TL* THE CONTACT OWNS A 2019 GMC YUKON. THE CONTACT STATED THAT WHILE OPERATING THE VEHICLE THE FRONT SEAT DRIVER AND PASSENGER HAD BECOME ILL AND SUFFERED DIZZINESS AND LIGHT HEADINESS AND THE PASSENGER ALSO SUFFER BREATHING PROBLEMS WHICH REQUIRED MEDICAL TREATMENT. THE VEHICLE WAS TAKEN TO THE LOCAL DEALER RIVERTOWN BUICK/GMC (1661 WHITTLESEY RD. COLUMBUS GA) WHO WAS UNABLE TO DETERMINE THE CAUSE OF THE FAILURE BUT WOULD REPLACED THE EVAPORATOR COIL. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 2,000.

NHTSA ODI #11220139

Official recalls

2

26V289000 · Power Train:transfer Case (4-WHEEL Drive)

May 7, 2026

General Motors, LLC (GM) is recalling certain 2026 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, and Tahoe, and GMC Sierra 1500, Yukon, and Yukon XL vehicles with four-wheel (4WD) or all-wheel drive (AWD), and certain 2015-2020 Suburban, Escalade, Escalade ESV, Yukon, Yukon XL, and Tahoe vehicles. A component missing from the drivetrain transfer case may cause the front and/or rear wheels to lock up without warning to the driver.

Consequence & remedy

Consequence: Front or rear wheel lockup increases the risk of a crash.

Remedy: Owners are advised not to drive their vehicle until the remedy is completed. Dealers will inspect and, if necessary, replace the transfer case assembly, free of charge. Owner notification letters were mailed May 18, 2026. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-333-4223. GM's number for this recall is N262557620. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on May 7, 2026.

19V761000 · Electronic Stability Control (esc); Service Brakes; Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:wheel Speed Sensor/tone Ring

Oct 24, 2019

General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.

Consequence & remedy

Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.

Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.

Additional source detail variants (3)

Service Brakes

General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.

Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.

Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.

Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:wheel Speed Sensor/tone Ring

General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.

Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.

Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.

Electronic Stability Control (esc)

General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.

Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.

Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

0

No exact-year investigations in this snapshot.