← New search

2011 GMC Yukon

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2011 GMC Yukon do not stand out strongly from the model-year median of 103.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Yukon years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

85 reports with mileage · 73 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 79 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Structure. Review the 27 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Engine. Review the 13 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

2 crash reports0 fire reports2 injury reports

Service Brakes complaints

5 reports
Clear category filter
Mileage unknown · Feb 28, 2023
Service BrakesUnknown Or Other

R and R shifter cables needed fixed exhaust needed fix brakes needed fixed. Still need air conditioning fixed was told the hoses are all cut this is how the sold us the Yukon. I took it back twice and they would not fix it. I have tried calling and talking to people to see what to do. Could you please help me.we used all our …

Read full complaint

R and R shifter cables needed fixed exhaust needed fix brakes needed fixed. Still need air conditioning fixed was told the hoses are all cut this is how the sold us the Yukon. I took it back twice and they would not fix it. I have tried calling and talking to people to see what to do. Could you please help me.we used all our money for down payment at time.

NHTSA ODI #11509606

Mileage unknown · Aug 30, 2022
Lane DepartureService BrakesWheels

the towing brakes system fails every day, the blind spot warning fails with every rain day, dashboard is cracking and falling apart, the Crome rims provided by gm the Crome is peeling off and cause loss of air daily

NHTSA ODI #11481910

131,814 miles · Feb 4, 2022
Service Brakes

The contact owns a 2011 GMC Yukon. The contact stated that while driving at 60-65 MPH, the check engine warning light, the ABS warning light, the emergency parking brake warning light, the stability tract warning light, the warning indicator “Service Brake System” and other unknown warning lights illuminated. The brake pedal was…

Read full complaint

The contact owns a 2011 GMC Yukon. The contact stated that while driving at 60-65 MPH, the check engine warning light, the ABS warning light, the emergency parking brake warning light, the stability tract warning light, the warning indicator “Service Brake System” and other unknown warning lights illuminated. The brake pedal was depressed but felt rigid and failed to respond. The contact depressed the brake pedal with more pressure, but it hesitated to respond, causing 40 feet in stopping distance delay. The contact continued to drive the vehicle. The vehicle was taken to the dealer where it was diagnosed that the EBCM module, the BPCM module and the valve ABS unit needed to be replaced. The contact stated that the vehicle was repaired; however, the failure had been reoccurring while driving. The manufacturer was notified of the failure and referred the contact to the dealer for diagnostic testing. The vehicle was not repaired. The failure mileage was approximately 131,814.

NHTSA ODI #11450419

125,000 miles · Nov 28, 2020
EngineService BrakesVehicle Speed Control

HAVING AN ONGOING ISSUE WHILE DRIVING. I'VE BEN ON THE HIGHWAY IN THE RAIN AND SNOW GOING 65-70 MPH AS WELL AS DRY PAVEMENT. ALL OF A SUDDEN MY DASHBOARD WILL LIGHT UP SAYING SERVICE TRACTION CONTROL, BRAKE SYSTEM, ABS , PARK ASSIST OFF AND CHECK ENGINE LIGHTS UP AND BLINKS . I WILL LOOSE MY BRAKES I THEN HAVE TO PUMP MY BRAKES …

Read full complaint

HAVING AN ONGOING ISSUE WHILE DRIVING. I'VE BEN ON THE HIGHWAY IN THE RAIN AND SNOW GOING 65-70 MPH AS WELL AS DRY PAVEMENT. ALL OF A SUDDEN MY DASHBOARD WILL LIGHT UP SAYING SERVICE TRACTION CONTROL, BRAKE SYSTEM, ABS , PARK ASSIST OFF AND CHECK ENGINE LIGHTS UP AND BLINKS . I WILL LOOSE MY BRAKES I THEN HAVE TO PUMP MY BRAKES SEVERAL TIMES TO GET TO EVEN SLOW DOWN OR STOP . IT'S ALSO HAPPENED WHEN I AM DRIVING DOWN A RESIDENTIAL STREET. WHEN I PULL OVER TURN THE TRUCK OFF AND GOES BACK TO NORMAL FOR A SHORT DISTANCE. WEATHER DOESN'T SEEM TO BE A FACTOR OR SPEED. TAKEN VEHICLE TO DEALERSHIP AND THEY DON'T FIND ANYTHING WRONG. HAD THEM REPLACE BEARINGS AS WELL AS SPEED SENSORS AND IT IS STILL HAPPENING. AND I HAD A CODE COME UP FOR CYLINDER MISFIRE AND KNOCK SENSOR. THEN TAKE IT GARAGE AND NOTHING IS WRONG.

NHTSA ODI #11376909

140,000 miles · May 4, 2018
Service Brakes

ABS BRAKE PROBLEM. REOCCURRING ENGINE PROBLEMS SUCH AS MISFIRE, LOW CYLINDER COMPRESSION, AFM LIFTERS, CAMSHAFT, FUEL MIX AND BRAKE SWITCH CAUSES CHECK ENGINE LIGHT TO COME ON. THIS CAUSES STABILITRAK AND TRACTION CONTROL TO BE TURNED OFF. DISCUSSIONS WITH SEVERAL MECHANICS INDICATED A NEW ENGINE WOULD BE THE ONLY WAY TO FIX …

Read full complaint

ABS BRAKE PROBLEM. REOCCURRING ENGINE PROBLEMS SUCH AS MISFIRE, LOW CYLINDER COMPRESSION, AFM LIFTERS, CAMSHAFT, FUEL MIX AND BRAKE SWITCH CAUSES CHECK ENGINE LIGHT TO COME ON. THIS CAUSES STABILITRAK AND TRACTION CONTROL TO BE TURNED OFF. DISCUSSIONS WITH SEVERAL MECHANICS INDICATED A NEW ENGINE WOULD BE THE ONLY WAY TO FIX THIS PROBLEM. EVEN WITH A NEW ENGINE, THE PROBLEM PERSISTS. THE CHECK ENGINE LIGHT CONTINUES TO BE "ON" AND STABILITRAK AND TRACTION CONTROL CONTINUE TO GO ON AND OFF, AND LIVING IN MI IT IS CONCERNING ME THAT I MAY LOSE THESE BRAKING FUNCTIONS WHEN I NEED THEM. GMC HAS OFFERED NO SOLUTIONS. MANY, MANY FORUM DISCUSSIONS ON THE WEB INDICATE OWNERS SUCH AS ME SHOULD CREATE A CLASS-ACTION LAWSUIT, AS THERE DOES NOT APPEAR TO BE A SOLUTION TO THIS PROBLEM. THE STABILITRAK AND TRACTION CONTROL GOES ON AND OFF AS I AM DRIVING, TYPICALLY ON A HIGHWAY.

NHTSA ODI #11091958

Official recalls

5

21V050000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2007-2011 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL, and 2009-2011 Chevrolet Silverado 2500, Silverado 3500, GMC Sierra 2500 and Sierra 3500 vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL vehicles originally sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 22, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on March 1, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328760.

21V054000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally GM is recalling certain 2011-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, Yukon XL and 2011-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Additionally, GM is recalling certain 2010-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL and 2010-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 25, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed to 40 VIN owners on May 11, 2021. A second owner notification letter was mailed to all other owners on January 24, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328800.

14V827000 · Electrical System:ignition

Dec 30, 2014

General Motors LLC (GM) is recalling certain model year 2011-2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. In the affected vehicles, the ignition lock actuator may bind, making turning the key difficult or causing the ignition to get stuck in the "Start" position.

Consequence & remedy

Consequence: If stuck in the "Start" position, the ignition may suddenly snap back into the "Accessory" position, causing a loss of engine, steering, and braking power, increasing the risk of a vehicle crash. If the vehicle is in a crash, the air bags may not deploy, increasing the risk of occupant injury.

Remedy: GM will notify owners, and dealers will inspect and replace the ignition lock housing, as necessary, free of charge. The recall began on February 12, 2015. Owners may contact GM customer service at 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14696 for the original equipment, and 14912 for the service replacement parts.

11V339000 · Steering:linkages

Jun 28, 2011

GM IS RECALLING CERTAIN MODEL YEAR 2011CADILLAC ESCALADE, ESCALADE ESV; CHEVROLET SILVERADO HD, SILVERADO LD, SUBURBAN, TAHOE; AND GMC SIERRA HD, SIERRA LD, YUKON, AND YUKON XL VEHICLES. THE INTERMEDIATE STEERING SHAFT ATTACHING BOLTS MAY NOT HAVE BEEN TIGHTENED TO THE PROPER SPECIFICATION.

Consequence & remedy

Consequence: THIS COULD ALLOW THE JOINTS TO SEPARATE, AND THE DRIVER COULD EXPERIENCE LOSS OF STEERING INCREASING THE RISK OF A CRASH.

Remedy: GM DEALERS WILL INSPECT AND ENSURE THAT THE INTERMEDIATE STEERING SHAFT BOLTS ARE TIGHTENED TO THE PROPER SPECIFICATION. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT JULY 13, 2011. OWNERS MAY CONTACT CADILLAC AT 1-800-458-8006, CHEVROLET AT 1-800-630-2438 AND GMC AT 1-866-996-9463.

11V007000 · Suspension:rear:axle:spindle

Jan 6, 2011

GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2011 CADILLAC ESCALADE, ESCALADE ESV, ESCALADE EXT; CHEVROLET AVALANCHE, COLORADO, EXPRESS, SILVERADO, SUBURBAN, TAHOE; AND GMC CANYON, SIERRA, SAVANA, YUKON AND YUKON XL VEHICLES. THE REAR AXLE CROSS PINS WERE NOT PROPERLY HEAT TREATED AND COULD FRACTURE AND BECOME DISPLACED WITHIN THE REAR AXLE. SHOULD THE PIN SHIFT OUT OF POSITION, IT COULD CREATE AN INTERFERENCE CONDITION AND CAUSE THE REAR AXLE TO LOCK.

Consequence & remedy

Consequence: THE DRIVER MAY NOT BE ABLE TO MAINTAIN DIRECTIONAL CONTROL OF THE VEHICLE AND A CRASH COULD OCCUR WITHOUT WARNING.

Remedy: DEALERS WILL INSTALL A NEW REAR AXLE CROSS PIN FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 11, 2011. OWNERS MAY CONTACT CADILLAC AT 1-866-982-2339, CHEVROLET AT 1-800-630-2438, GMC AT 1-866-996-9463 AND AT THE OWNER CENTER AT WWW.GMOWNERCENTER.COM.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.