SkipThatYearREAL DATA. SMARTER CAR DECISIONS.
← New search

2021 GMC Yukon Xl

Owner reports · Recalls · Investigations

More warning signs than most Yukon Xl years

Owner complaints for the 2021 GMC Yukon Xl are substantially higher than the model-year median of 68.

About this comparison →
220Owner complaints

Model-year median: 68

12Recall campaigns

View recall details →

5Investigations

View investigation details →

How this year compares

Owner complaints by model year

Other model years Selected year
52
201867
201946
2020220
2021163
2022212
202369
2024
Compare all Yukon Xl years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

Engine
135Power Train
47Fuel/propulsion System
27Engine And Engine Cooling
21Electrical System
13
All reported categories
Forward Collision Avoidance
7Unknown Or Other
7Vehicle Speed Control
7Service Brakes
6Suspension
6Air Bags
4Fuel System, Gasoline
4Steering
4Visibility/wiper
4Seat Belts
3Lane Departure
2Structure
2Visibility
2Wheels
2Back Over Prevention
1Chest Clip, Buckle, Harness
1Exterior Lighting
1

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 46 of 220 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Engine. Review the 135 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Power Train. Review the 47 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Fuel/propulsion System. Review the 27 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

2 crash reports1 fire reports3 injury reports

What owners actually said

220 reports
Mileage unknown · Apr 24, 2022
Back Over PreventionElectrical SystemLane Departure

The vehicle had a total failure of its rear safety package which includes blind spot monitoring, rear cross traffic alert, rear parking sensors and rear safety alert. The warning illuminated on the dash that all of these functions were offline and service was needed. We took the Yukon to a GM dealer and they replaced a compute…

Read full complaint

The vehicle had a total failure of its rear safety package which includes blind spot monitoring, rear cross traffic alert, rear parking sensors and rear safety alert. The warning illuminated on the dash that all of these functions were offline and service was needed. We took the Yukon to a GM dealer and they replaced a computer and had a hard time getting it to program. This failure also affected the HVAC system in the car, with the fan staying on high. After 23 days of service, the dealer thought they fixed it. After two weeks of having the vehicle back the same alert came on 5-6 times in the same day, with another safety package failure. Now the alert doesn’t come on but none of those safety features work, they are all offline. It is bad enough driving a 20’ long vehicle without the safety package working, but now it is worse in that the car doesn’t alert you to the fact it isn’t working and you might not remember that it is defective. This could cause a collision on the highway or result in the driver backing into something or someone, relying on this technology.

NHTSA ODI #11461959

Mileage unknown · Feb 1, 2022
Forward Collision AvoidanceInjury

On Wednesday, January 12, 2022, while driving from Columbia, SC to Cincinnati, we were heading northwest through the mountains of North Carolina, on I-40, just east of the TN border. Traffic was fairly steady and heavy, so we were traveling at approximately 45 MPH, in the right lane, winding through the mountains. Our friend, *…

Read full complaint

On Wednesday, January 12, 2022, while driving from Columbia, SC to Cincinnati, we were heading northwest through the mountains of North Carolina, on I-40, just east of the TN border. Traffic was fairly steady and heavy, so we were traveling at approximately 45 MPH, in the right lane, winding through the mountains. Our friend, ** ***** was driving, my wife, ********* *****, was sitting in the right front passenger seat, working on her laptop, and I was sitting immediately behind her, also working on my laptop. With a semi-trailer truck slowing ahead of us, *** signaled to make a lane change into the left lane (this is only a two lane highway). As we were transitioning to the left lane, the vehicle suddenly – without any warning or driver inputs – slammed on its brakes, bringing the truck to a sudden and violent stop. Given the violent halting of the truck, we all assumed we had been rear-ended by a truck. The braking was so serious, luggage from the rear of the vehicle shot forward like a missile, striking my wife in the back of the head. She suffered what we believe to be a concussion, and she did seek medical attention in the days following the incident. Sitting behind her, the sudden stopping action caused me to twist my left knee, resulting in what might be a cartilage tear. I also saw my physician in the days following, and he acknowledged the swelling of the left knee. He advised me to monitor the knee carefully, and if the pain persists, to get an MRI. The pain has not gone away, and I plan to get an MRI in the next week or so. Our friend suffered a severely strained back in the incident, and has been treating his back with both ice and heat therapy. This was the THIRD time this happened, each nearly resulting in a tragic accident. The dealer said "it's just a software glitch." The "Brake Assist" program is clearly defective and unsafe.

NHTSA ODI #11449744

Mileage unknown · Jan 11, 2022
EngineFuel/propulsion System

I was traveling on the highway and the vehicle started to jolt, sputter and speed acceleration was reduced in a highly congested area with little room to maneuver. I had to quickly shift lanes and get off at the first exit I could as I figure out what the issue was. I immediately contacted my Dealership and they were able to get…

Read full complaint

I was traveling on the highway and the vehicle started to jolt, sputter and speed acceleration was reduced in a highly congested area with little room to maneuver. I had to quickly shift lanes and get off at the first exit I could as I figure out what the issue was. I immediately contacted my Dealership and they were able to get me an emergency appointment so my vehicle could be inspected that day. After the Dealers analysis they said that a lifter needed to be replaced. I have a brand new vehicle with less than 8,611 miles on it. The lifter issue puzzled me so I went to the GMC Yukon message and sure enough there are ALOT of 2021 Yukon/Tahoe owners that have had this exact same issue with even worse stories than mine.

NHTSA ODI #11447127

Mileage unknown · Dec 15, 2021
Electrical SystemEnginePower Train

I was driving 30 mph when the car went into neutral and rolled to a stop. When I put on the brakes the engine shut off and it went into park. It would not restart or shift out of park . I was stuck in an active busy road. The car was towed to the dealer. They said it was a problem with the BCM. GMC had put out a bullletin which …

Read full complaint

I was driving 30 mph when the car went into neutral and rolled to a stop. When I put on the brakes the engine shut off and it went into park. It would not restart or shift out of park . I was stuck in an active busy road. The car was towed to the dealer. They said it was a problem with the BCM. GMC had put out a bullletin which was to reprogram the BCM. My concern is that if this had happened on a busy interstate in traffic at highway speeds the results could have been fatal.

NHTSA ODI #11443857

Mileage unknown · Jul 9, 2021
Air BagsCrashInjury

Make left turn and distracted by kids in the back. Looked back and felt a crash. Collided with a traffic signal pole and caused major/total damage to vehicle. Driver side airbag DID NOT deploy causing injury to neck, shoulder, and lower back.

NHTSA ODI #11424049

Mileage unknown · Jun 24, 2021
Engine

Our vehicle had a warning light of traction system not working - we were told to take to nearest dealer that springs with the valves were faulty and lifters not working. Took it to Everett in Benton, AR. Took two weeks to get the parts to fix. Told this was a problem. We had 4000 miles on the vehicle. Yesterday, it happened…

Read full complaint

Our vehicle had a warning light of traction system not working - we were told to take to nearest dealer that springs with the valves were faulty and lifters not working. Took it to Everett in Benton, AR. Took two weeks to get the parts to fix. Told this was a problem. We had 4000 miles on the vehicle. Yesterday, it happened again. Told by Cowboy in Heber Springs, AR where we bought the vehicle they had six in their shop with same problem. They advised that our vehicle would have to be towed. GMC does not think it is a safety issue but it is - the vehicle slows down and there is little power to drive. Yesterday I was pulling a bass boat and only made it home with great difficulty. This problem that seems to be prevalent with all the 2021 Denalis needs to be investigated before someone gets hurt or killed. First incident was May 2, 2021 and second (after allegedly being fixed) was June 23, 2021.

NHTSA ODI #11422099

2,050 miles · Apr 1, 2021
Suspension

VEHICLE HAS BEEN AT THE DEALER WITH GM INVOLVEMENT STARTING JANUARY 6TH AND IT HAS BEEN OUT OF THE REPAIR FACILITY FOR LESS THAN 2 WEEKS UP TO TODAY, 4/1/2021. THE VEHICLE HAS AN ADAPTIVE SUSPENSION SYSTEM THAT HAS NOT ONLY FAILED, BUT HAS CONTINUED TO FAIL AFTER MULTIPLE REPAIR ATTEMPTS. THERE SEEMS TO BE AN ISSUE WITH THIS N…

Read full complaint

VEHICLE HAS BEEN AT THE DEALER WITH GM INVOLVEMENT STARTING JANUARY 6TH AND IT HAS BEEN OUT OF THE REPAIR FACILITY FOR LESS THAN 2 WEEKS UP TO TODAY, 4/1/2021. THE VEHICLE HAS AN ADAPTIVE SUSPENSION SYSTEM THAT HAS NOT ONLY FAILED, BUT HAS CONTINUED TO FAIL AFTER MULTIPLE REPAIR ATTEMPTS. THERE SEEMS TO BE AN ISSUE WITH THIS NEW ADAPTIVE SUSPENSION, SPECIFICALLY WHEN THE 'VEHICLE ACCESS' OPTION IS TOGGLED IN THE SETTINGS. THIS HAS CAUSED MULTIPLE SAFETY WARNINGS; 'VEHICLE TOO HIGH, DRIVE SLOWLY VEHICLE UNSAFE' AND 'VEHICLE TOO LOW, DRIVE SLOWLY, VEHICLE UNSAFE'. DEALER AND GM HAVE REPLACES MILLIE PARTS, SOFTWARE AND SENSORS, TO NO AVAIL. THE MAJOR CONCERN IS THAT MOST OWNERS DON'T REALIZE THE RISK AND THIS IS A FLAW IN THE DESIGN WHICH COULD LEAD TO ACCIDENTS. MY VEHICLE HAD TO BE TOWED IN AT THE LAST RESURGENCE BECAUSE IT WAS NOT IN AS STATE TO BE DRIVEN. THE SUSPENSION COLLAPSED AFTER HAVING 35 DAYS IN THE SHOP. IT SEEMS THAT THE SOFTWARE AND THE SYSTEM AREN'T PROPERLY FUNCTIONING/DESIGNED. THIS COULD BE ENDEMIC IN EVERY DENALI, OR OTHER GM VEHICLE WITH THIS SYSTEM, THAT ENABLES THE AUTOMOTIVE ACCESS (VEHICLE LOWERS WHEN IN PARK). THIS ISSUE OCCURRED WHILE PARKED AND WHILE DRIVING, BOTH LOCALLY AND HIGHWAY. THE SCARIEST WAS WHEN I WAS DRIVING TO THE DEALER AND THE SUSPENSION STARTED BOUNCING CAUSING ME TO GO NO MORE THAN 40MPH ON THE INTERSTATE TO THE DEALER.

NHTSA ODI #11405900

150 miles · Jan 31, 2021
Service BrakesSteering

GM CHANGED THE TRAVEL OF THE STEERING COLUMN SO NOW IT'S ONLY A FEW INCHES FROM THE DASHBOARD. IN PRIOR MODELS, THE STEERING WHEEL (SW) TRAVEL WAS MUCH MORE. DUE TO GM'S DESIRE TO SAVE MONEY AND COMPLETE DISREGARD FOR DRIVER, PASSENGER AND OTHER VEHICLES SAFETY, THE DRIVER HAS TO REACH OUT TO THE SW RESULTING AT DANGEROUS ELBOW …

Read full complaint

GM CHANGED THE TRAVEL OF THE STEERING COLUMN SO NOW IT'S ONLY A FEW INCHES FROM THE DASHBOARD. IN PRIOR MODELS, THE STEERING WHEEL (SW) TRAVEL WAS MUCH MORE. DUE TO GM'S DESIRE TO SAVE MONEY AND COMPLETE DISREGARD FOR DRIVER, PASSENGER AND OTHER VEHICLES SAFETY, THE DRIVER HAS TO REACH OUT TO THE SW RESULTING AT DANGEROUS ELBOW ANGLES. IN PERFORMANCE CARS, THE SW IS DESIGNED TO BE CLOSE TO THE DRIVER BECAUSE PHYSICS PRINCIPLES OF TORQUE REVEAL: THE GREATER THE ANGLE OF REACH, THE MORE TORQUE IT REQUIRES TO TURN THE SW. SO REACHING OUT WITH THE ELBOW AT ZERO TO 10 DEGREES REQUIRES A MUCH LONGER REACH, THUS GREATER FORCE/TORQUE AND LONGER REACTION TIME, THAN HAVING THE SW AT A 30-40 DEGREE 'ELBOW BEND'. THE POINT IS, FOR A DRIVER TO TURN THE SW ON THIS VEHICLE, IT TAKES TOO MUCH STRENGTH AND TOO LONG A REACTION TIME TO SAFELY OPERATE IT. I DO NOT FEEL SAFE DRIVING THIS MODEL LIKE I DID WITH PRIOR MODEL YEARS. WITH THIS 'LAND YACHT' HAVING AN EVEN LONGER WHEELBASE THAN BEFORE, THE DISTANCE TO THE SW IS EVEN MORE CRITICAL IN REGARDS TO REACTION TIME AND SAFE DRIVING! PLUS, SINCE THE SW IS SO CLOSE TO THE DASHBOARD, WHEN I RAISE MY LEG TO STEP ON THE BRAKE PEDAL (WHICH NOW I HAVE TO DO BECAUSE GM ALSO TOOK AWAY THE FOOT PEDAL ADJUSTER!), MY LEG HITS THE BOTTOM OF THE SW! THE TIME IT NOW TAKES TO BRING A FOOT UP OVER THE BRAKE PEDAL, TO LOOK DOWN TO SEE IF YOUR LEG IS GOING TO HIT THE SW AND CAUSE THE SW TO EITHER STOP MOVING OR RE-DIRECT THE VEHICLE INTO AN UNPLANNED DIRECTION, ALL WHILE TRYING TO STOP THIS OVER 7,700 LB VEHICLE WITH MUSHIER BRAKES THAN ANY MODEL EVER, IS DANGEROUSLY LONG. THE OVERALL REACTION TIME TO GENERALLY STOP THIS MODEL IS AT LEAST 5 TIMES THAT OF MY 2018 YUKON XL DENALI. THE TRAVEL LENGTH OF THE SW NEEDS TO BE INCREASED 2-3 INCHES TO SAFELY OPERATE THIS TRUCK. GM MUST BE HELD ACCOUNTABLE FOR INCREASING DANGEROUS SITUATIONS WITH THEIR VEHICLES!

NHTSA ODI #11390885

100 miles · Jan 31, 2021
Lane DepartureVisibility/wiper

I'VE OWNED OVER A DOZEN GM TRUCKS OVER THE LAST 20+ YEARS AND THIS MODEL IS THE WORST EVER! MY COMPLAINT: GM TOOK AWAY THE TURN SIGNAL LIGHTS ON THE SIDE MIRRORS. THE TURN SIGNAL INDICATORS ON THE DASH ARE TOO SMALL AND LOCATED WITH MANY OTHER LIGHTS/INDICATORS, SO THEY CANNOT BE SEEN QUICKLY NOR 'EASILY' AND CAN'T BE HEARD UND…

Read full complaint

I'VE OWNED OVER A DOZEN GM TRUCKS OVER THE LAST 20+ YEARS AND THIS MODEL IS THE WORST EVER! MY COMPLAINT: GM TOOK AWAY THE TURN SIGNAL LIGHTS ON THE SIDE MIRRORS. THE TURN SIGNAL INDICATORS ON THE DASH ARE TOO SMALL AND LOCATED WITH MANY OTHER LIGHTS/INDICATORS, SO THEY CANNOT BE SEEN QUICKLY NOR 'EASILY' AND CAN'T BE HEARD UNDER NORMAL TRAFFIC CONDITIONS. THIS CREATES AN INCREDIBLY DANGEROUS SITUATION WITH DRIVER DISTRACTION TRYING TO SEE IF A TURN SIGNAL HAS BEEN ACTIVATED AND INCREASES THE RISK OF VEHICLES NEXT TO THE TRUCK NOT EXPECTING A LANE CHANGE IF THEY ARE AHEAD OF THE TAIL LIGHTS. NUMEROUS TIMES OVER THE PAST FEW WEEKS I'VE OWNED THIS VEHICLE, I'VE ALMOST RUN INTO ADJACENT VEHICLES I COULDN'T 'SEE' BECAUSE THE BLIND SPOT WARNING SYSTEM DOES NOT DETECT VEHICLES WELL ENOUGH TO AVOID TURNING INTO THEM AND ALSO BECAUSE I WAS DISTRACTED TRYING TO SEE THE TURN INDICATOR ON THE DASHBOARD, OOK INTO THE SIDE MIRRORS AND WATCH MY DISTANCE TO CARS IN FRONT OF ME. THE TURN SIGNAL INDICATORS ON THE MIRRORS ON THE PRIOR MODEL SIGNIFICANTLY REDUCED DRIVER DISTRACTIONS AND INCREASED SAFETY TO THE DRIVER, PASSENGERS AND ADJACENT VEHICLES. GM MUST BE HELD ACCOUNTABLE FOR REMOVING SAFETY FEATURES! THEY MUST BE FORCED TO REPLACE THE MIRRORS WITH ONES THAT HAVE TURN SIGNAL INDICATORS IN THEM LIKE ON PRIOR MODEL YEARS. IF IT'S NOT A SAFETY ISSUE, WHY DID THEY HAVE THE INDICATORS IN THE MIRRORS BEFORE?? REMOVING THE MIRROR SIGNAL LIGHTS WAS OBVIOUSLY A SICK WAY FOR GM TO SAVE A FEW DOLLARS WITH INTENDED DISREGARD FOR THE SAFETY OF IT'S OWNERS, PASSENGERS AND EVERYONE ELSE ON THE ROAD. THESE PROBLEMS EXIST WHEN THE VEHICLE IS STOPPED (BLIND SPOT ISSUES), TURNING, CHANGING LANES AND MOVING ON EVERY TYPE OF ROADWAY, BUT ESPECIALLY AT HIGHWAY SPEEDS WHERE HUNDREDS OF FEET ARE TRAVELED IN ONLY A FEW SECONDS, AND DISTRACTIONS BECOME EVEN MORE UNSAFE AND DANGEROUS TO EVERYONE.

NHTSA ODI #11390879

52 miles · Nov 2, 2020
Engine

WITH ONLY 52 MILES (2-DAYS OLD), I WAS DRIVING HOME WHEN I HEARD A KNOCK. THEN THE ENGINE LIGHT CAME ON AND THE VEHICLE STABILITY CONTROL LOWERED THE VEHICLE AND THE VEHICLE SHUT OFF. I WAS LEFT IN THE MIDDLE OF TRAFFIC UNABLE TO MOVE THE VEHICLE TO A SAFE LOCATION. NEUTRAL WOULD NOT WORK EITHER. WHEN THE VEHICLE WAS TOWED T…

Read full complaint

WITH ONLY 52 MILES (2-DAYS OLD), I WAS DRIVING HOME WHEN I HEARD A KNOCK. THEN THE ENGINE LIGHT CAME ON AND THE VEHICLE STABILITY CONTROL LOWERED THE VEHICLE AND THE VEHICLE SHUT OFF. I WAS LEFT IN THE MIDDLE OF TRAFFIC UNABLE TO MOVE THE VEHICLE TO A SAFE LOCATION. NEUTRAL WOULD NOT WORK EITHER. WHEN THE VEHICLE WAS TOWED TO THE GMC DEALERSHIP, THEY KNEW EXACTLY WHAT WAS WRONG WITH THE CAR, BROKEN SPRINGS IN THE ENGINE. APPARENTLY THEY SENT A NOTICE STATING THAT THE ENGINE SPRINGS WERE BREAKING AND NEEDED TO BE REPLACED. THE DEALERSHIP ONLY OFFERED TO REPLACE THE 2 BROKEN SPRINGS, NOT ALL OF THEM SINCE MY VEHICLE WAS BUILT AFTER THE DATE NOTED FOR HAVING ISSUES. THEY WOULD NOT PROVIDE ME WITH ANY PAPERWORK ABOUT THE SERVICE. I'M NOT SURE HOW THIS COMPANY CAN GET AWAY WITH SELLING VEHICLES THEY KNOW HAVE ISSUES WITH FAULTY PARTS.

NHTSA ODI #11372749

Official recalls

12

25V274000 · Engine And Engine Cooling:engine:hard Parts Internal/mechanical

Apr 24, 2025

General Motors LLC (GM) is recalling certain 2021-2024 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, and Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles equipped with a 6.2L V8 gas engine. The connecting rod and/or crankshaft engine components may have manufacturing defects that can lead to engine damage and engine failure.

Consequence & remedy

Consequence: Engine failure increases the risk of a crash.

Remedy: Dealers will inspect the engine, and as necessary, repair or replace the engine. For vehicles that pass inspection, dealers will add higher viscosity oil, install 6 oil fill cap, replace the oil filter, and update the owner's manual. Repairs will be performed free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Cadillac customer service at 1-800-333-4223, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is N252494000.

24V797000 · Power Train:automatic Transmission:control Module:software; Power Train:automatic Transmission:fluid/lubricant:valves/valve Body

Oct 24, 2024

General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control valve may fail and cause the rear wheels to lock-up.

Consequence & remedy

Consequence: Rear wheel lock-up can increase the risk of a crash.

Remedy: Dealers will install new transmission control module software, free of charge. GM will provide a special coverage program to cover the repair of transmissions that are identified by the remedy software as containing a defective control valve. Owner notification letters were mailed December 12, 2024. Owners may contact GM customer service at 1-888-988-7267, Cadillac customer service at 1-800-458-8006, GMC customer service at GMC 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242454440.

Additional source detail variants (2)

Power Train:automatic Transmission:fluid/lubricant:valves/valve Body

General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control valve may fail and cause the rear wheels to lock-up.

Consequence: Rear wheel lock-up can increase the risk of a crash.

Remedy: Dealers will install new transmission control module software, free of charge. GM will provide a special coverage program to cover the repair of transmissions that are identified by the remedy software as containing a defective control valve. Owner notification letters were mailed December 12, 2024. Owners may contact GM customer service at 1-888-988-7267, Cadillac customer service at 1-800-458-8006, GMC customer service at GMC 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242454440.

Power Train:automatic Transmission:control Module:software

General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control valve may fail and cause the rear wheels to lock-up.

Consequence: Rear wheel lock-up can increase the risk of a crash.

Remedy: Dealers will install new transmission control module software, free of charge. GM will provide a special coverage program to cover the repair of transmissions that are identified by the remedy software as containing a defective control valve. Owner notification letters were mailed December 12, 2024. Owners may contact GM customer service at 1-888-988-7267, Cadillac customer service at 1-800-458-8006, GMC customer service at GMC 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242454440.

22V827000 · Exterior Lighting:lighting Control Module:software

Nov 3, 2022

General Motors, LLC (GM) is recalling certain 2021 Yukon, Yukon XL, Chevrolet Tahoe, Chevrolet Suburban, Cadillac Escalade, and Cadillac Escalade ESV vehicles. The daytime running lights (DRLs) may not deactivate when the headlights are on. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

Consequence & remedy

Consequence: Daytime Running Lights that do not deactivate as intended may cause a glare, reducing visibility and increasing the risk of a crash.

Remedy: Dealers will provide an over-the-air (OTA) update for the Body Control Module software, free of charge. Owner notification letters were mailed December 15, 2022. Owners may contact GM customer service at 1-888-988-7267, Chevrolet customer service at 1-800-222-1020, or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N222382220.

22V617000 · Seat Belts:critical Fasteners

Aug 11, 2022

General Motors, LLC (M) is recalling certain 2021-2022 Cadillac Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, GMC Yukon, and Yukon XL vehicles equipped with third-row seats. The rivet that retains the buckle to the mounting bracket in the left or right side third-row seat belt buckle assembly may have been improperly formed.

Consequence & remedy

Consequence: A seat belt with a deformed rivet may not properly restrain an occupant, increasing the risk of injury during a crash.

Remedy: Dealers will inspect the rivet head formation on both the left and right side third-row seat belt buckle assemblies and replace seat belt buckle assemblies, as necessary, free of charge. Interim owner notification letters informing owners of the safety risk were mailed September 28, 2022. Owner notification letters were mailed on November 1, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N222372380.

22V036000 · Power Train:driveline:driveshaft

Jan 27, 2022

General Motors, LLC (GM) is recalling certain 2021 GMC Yukon, Yukon XL, Cadillac Escalade, Escalade ESV, Chevrolet Suburban, and Chevrolet Tahoe vehicles. The rear wheel driveshaft assemblies may have internal components that were not heat-treated properly, possibly resulting in driveshaft failure.

Consequence & remedy

Consequence: Driveshaft failure can cause a sudden loss of drive power, increasing the risk of a crash.

Remedy: Dealers will replace the left and/or right rear driveshaft assemblies, free of charge. Owner notification letters were mailed on March 14, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006 or GMC customer service at 1-800-462-8782. GM's number for this recall is N212351030.

21V739000 · Fuel System, Gasoline:delivery:fuel Pump:control/drive Module

Sep 23, 2021

General Motors, LLC (GM) is recalling certain 2021 Cadillac Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, GMC Yukon, and Yukon XL vehicles. The fuel pump power control module may cause the fuel pump to fail or operate intermittently, which can interrupt fuel flow to the engine, and cause an unexpected engine stall.

Consequence & remedy

Consequence: An engine stall increases the risk of a crash.

Remedy: Dealers will replace the fuel pump power control module, free of charge. Owner notification letters were mailed on October 14, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; or GMC customer service at 1-800-462-8782. GM's number for this recall is N212332040.

21V455000 · Steering:steering Control Module

Jun 17, 2021

General Motors, LLC (GM) is recalling certain 2021 Cadillac Escalade, Escalade ESV, Chevrolet Suburban, Chevrolet Tahoe, GMC Yukon, and Yukon XL vehicles. A software issue may cause a loss of power steering assist at startup or while driving.

Consequence & remedy

Consequence: Increased steering effort, particularly at lower speeds, increases the risk of a crash.

Remedy: The power steering module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed July 13, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; or GMC customer service at 1-800-462-8782. GM's number for this recall is N212333900.

21V421000 · Air Bags:srs Malfunction Warning Lamp/light; Electrical System:software

Jun 10, 2021

General Motors, LLC (GM) is recalling certain 2021 Buick Envision, Cadillac CT4, CT5, Escalade, Escalade ESV, Chevrolet Tahoe, Corvette, Suburban, GMC Yukon, Yukon XL vehicles. The communications gateway module incorrectly processes a loss of communication with the sensing diagnostic module (SDM), causing the air bag malfunction indicator light to inconsistently illuminate.

Consequence & remedy

Consequence: The air bag malfunction indicator light may fail to warn the driver of a problem with the air bag, increasing the risk of injury.

Remedy: The communications gateway module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on July 1, 2021. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is N212338110.

Additional source detail variants (2)

Air Bags:srs Malfunction Warning Lamp/light

General Motors, LLC (GM) is recalling certain 2021 Buick Envision, Cadillac CT4, CT5, Escalade, Escalade ESV, Chevrolet Tahoe, Corvette, Suburban, GMC Yukon, Yukon XL vehicles. The communications gateway module incorrectly processes a loss of communication with the sensing diagnostic module (SDM), causing the air bag malfunction indicator light to inconsistently illuminate.

Consequence: The air bag malfunction indicator light may fail to warn the driver of a problem with the air bag, increasing the risk of injury.

Remedy: The communications gateway module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on July 1, 2021. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is N212338110.

Electrical System:software

General Motors, LLC (GM) is recalling certain 2021 Buick Envision, Cadillac CT4, CT5, Escalade, Escalade ESV, Chevrolet Tahoe, Corvette, Suburban, GMC Yukon, Yukon XL vehicles. The communications gateway module incorrectly processes a loss of communication with the sensing diagnostic module (SDM), causing the air bag malfunction indicator light to inconsistently illuminate.

Consequence: The air bag malfunction indicator light may fail to warn the driver of a problem with the air bag, increasing the risk of injury.

Remedy: The communications gateway module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on July 1, 2021. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is N212338110.

21V190000 · Seat Belts; Seat Belts:rear/other

Mar 18, 2021

General Motors, LLC (GM) is recalling certain 2021 Cadillac Escalade, Escalade ESV, GMC Yukon, Yukon XL, Chevrolet Suburban, and Tahoe vehicles with third-row seating. The third-row outboard seat belts may have been entrapped or misrouted behind the outboard seat-folding mechanism, which could result in damaged seat belts.

Consequence & remedy

Consequence: A damaged seat belt can break during a crash, increasing the risk of injury to the occupant.

Remedy: GM will notify owners, and dealers will inspect the third-row outboard seat belts, replacing any damaged seat belts, and rerouting them if necessary, free of charge. The recall began on April 21, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Cadillac customer service at 1-800-458-8006. GM's number for this recall is N202313000.

Additional source detail variants (2)

Seat Belts:rear/other

General Motors, LLC (GM) is recalling certain 2021 Cadillac Escalade, Escalade ESV, GMC Yukon, Yukon XL, Chevrolet Suburban, and Tahoe vehicles with third-row seating. The third-row outboard seat belts may have been entrapped or misrouted behind the outboard seat-folding mechanism, which could result in damaged seat belts.

Consequence: A damaged seat belt can break during a crash, increasing the risk of injury to the occupant.

Remedy: GM will notify owners, and dealers will inspect the third-row outboard seat belts, replacing any damaged seat belts, and rerouting them if necessary, free of charge. The recall began on April 21, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Cadillac customer service at 1-800-458-8006. GM's number for this recall is N202313000.

Seat Belts

General Motors, LLC (GM) is recalling certain 2021 Cadillac Escalade, Escalade ESV, GMC Yukon, Yukon XL, Chevrolet Suburban, and Tahoe vehicles with third-row seating. The third-row outboard seat belts may have been entrapped or misrouted behind the outboard seat-folding mechanism, which could result in damaged seat belts.

Consequence: A damaged seat belt can break during a crash, increasing the risk of injury to the occupant.

Remedy: GM will notify owners, and dealers will inspect the third-row outboard seat belts, replacing any damaged seat belts, and rerouting them if necessary, free of charge. The recall began on April 21, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Cadillac customer service at 1-800-458-8006. GM's number for this recall is N202313000.

20V811000 · Seat Belts; Seat Belts:critical Fasteners

Dec 23, 2020

General Motors, LLC (GM) is recalling certain 2020 Chevrolet Bolt EV and 2021 GMC Canyon and Sierra 1500, 2500 and 3500, Yukon, Yukon XL, Cadillac Escalade and Escalade ESV and Chevrolet Blazer, Camaro, Colorado, Equinox, Silverado 1500, 2500 and 3500, Suburban and Tahoe vehicles. Incorrect bolts may have been used at one or more fastening locations to secure the seat belts to the vehicle. If an incorrect bolt was used, the seat belt may not be properly attached to the vehicle.

Consequence & remedy

Consequence: If a seat belt assembly is not properly attached to the vehicle, the seat belt may not properly restrain an occupant in the event of a crash, increasing the risk of injury.

Remedy: GM will notify owners, and dealers will replace the suspect bolts, free of charge. The recall began January 29, 2021. Owners may contact GMC customer service at 1-800-462-8785, Cadillac customer service at 1-800-458-8006, or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202322230.

Additional source detail variants (2)

Seat Belts:critical Fasteners

General Motors, LLC (GM) is recalling certain 2020 Chevrolet Bolt EV and 2021 GMC Canyon and Sierra 1500, 2500 and 3500, Yukon, Yukon XL, Cadillac Escalade and Escalade ESV and Chevrolet Blazer, Camaro, Colorado, Equinox, Silverado 1500, 2500 and 3500, Suburban and Tahoe vehicles. Incorrect bolts may have been used at one or more fastening locations to secure the seat belts to the vehicle. If an incorrect bolt was used, the seat belt may not be properly attached to the vehicle.

Consequence: If a seat belt assembly is not properly attached to the vehicle, the seat belt may not properly restrain an occupant in the event of a crash, increasing the risk of injury.

Remedy: GM will notify owners, and dealers will replace the suspect bolts, free of charge. The recall began January 29, 2021. Owners may contact GMC customer service at 1-800-462-8785, Cadillac customer service at 1-800-458-8006, or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202322230.

Seat Belts

General Motors, LLC (GM) is recalling certain 2020 Chevrolet Bolt EV and 2021 GMC Canyon and Sierra 1500, 2500 and 3500, Yukon, Yukon XL, Cadillac Escalade and Escalade ESV and Chevrolet Blazer, Camaro, Colorado, Equinox, Silverado 1500, 2500 and 3500, Suburban and Tahoe vehicles. Incorrect bolts may have been used at one or more fastening locations to secure the seat belts to the vehicle. If an incorrect bolt was used, the seat belt may not be properly attached to the vehicle.

Consequence: If a seat belt assembly is not properly attached to the vehicle, the seat belt may not properly restrain an occupant in the event of a crash, increasing the risk of injury.

Remedy: GM will notify owners, and dealers will replace the suspect bolts, free of charge. The recall began January 29, 2021. Owners may contact GMC customer service at 1-800-462-8785, Cadillac customer service at 1-800-458-8006, or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202322230.

20V792000 · Seat Belts; Seat Belts:critical Fasteners

Dec 17, 2020

General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position.

Consequence & remedy

Consequence: If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash.

Remedy: GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.

Additional source detail variants (2)

Seat Belts:critical Fasteners

General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position.

Consequence: If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash.

Remedy: GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.

Seat Belts

General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position.

Consequence: If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash.

Remedy: GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.

20V735000 · Seats; Seats:critical Fasteners

Nov 25, 2020

General Motors LLC (GM) is recalling certain 2021 Chevrolet Suburban and Tahoe and GMC Yukon and Yukon XL vehicles. During general assembly, a repair involved removal of one or both front seats. The attachment bolts for the front seats may not have been properly reinstalled after the repair was completed.

Consequence & remedy

Consequence: If an occupied front seat has loose or missing attachment bolts, it may move during a crash, increasing the risk of injury to the seated occupant.

Remedy: GM will notify owners, and dealers will inspect the seat attachments for both front seats and install attachment bolts as needed, free of charge. The recall began December 21, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020, and GMC customer service at 1-888-988-7267. GM's number for this recall is N202312720.

Additional source detail variants (2)

Seats:critical Fasteners

General Motors LLC (GM) is recalling certain 2021 Chevrolet Suburban and Tahoe and GMC Yukon and Yukon XL vehicles. During general assembly, a repair involved removal of one or both front seats. The attachment bolts for the front seats may not have been properly reinstalled after the repair was completed.

Consequence: If an occupied front seat has loose or missing attachment bolts, it may move during a crash, increasing the risk of injury to the seated occupant.

Remedy: GM will notify owners, and dealers will inspect the seat attachments for both front seats and install attachment bolts as needed, free of charge. The recall began December 21, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020, and GMC customer service at 1-888-988-7267. GM's number for this recall is N202312720.

Seats

General Motors LLC (GM) is recalling certain 2021 Chevrolet Suburban and Tahoe and GMC Yukon and Yukon XL vehicles. During general assembly, a repair involved removal of one or both front seats. The attachment bolts for the front seats may not have been properly reinstalled after the repair was completed.

Consequence: If an occupied front seat has loose or missing attachment bolts, it may move during a crash, increasing the risk of injury to the seated occupant.

Remedy: GM will notify owners, and dealers will inspect the seat attachments for both front seats and install attachment bolts as needed, free of charge. The recall began December 21, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020, and GMC customer service at 1-888-988-7267. GM's number for this recall is N202312720.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

5

EA26005 · Loss Of Motive Power Due To Engine Failure Post Recall Remedy

Opened Aug 20, 2026 · No close date supplied

Status: open (inferred from source dates) · Engine

On January 16, 2026, the Office of Defects Investigation (ODI) opened Recall Query RQ26001.  This investigation was opened to assess the remedy effectiveness of Recall 25V-274. ODI has received complaints alleging engine failure in vehicles after the recall remedy had been completed, whether that remedy involved an oil viscosity change or a complete engine replacement. General Motors (GM) issued Recall 25V-274 to address concerns of engine failure in the L87 engines produced between March 1, 2021 and May 31, 2024. GM cited the root cause as a supplier manufacturing and quality issue. GM’s recall remedy for Recall 25V-274 consisted of two different repairs, either an oil viscosity change or an engine replacement, based on the results of the remedy inspection procedure. ODI continues to receive reports of engine failures after the completion of the recall remedy. To date, ODI has received 499 complaints alleging post-remedy engine failure in vehicles subject to Recall 25V-274, 473 of which involved an oil viscosity change and 26 a complete engine replacement. Additionally, ODI has received 191 reports of L87 engine failures in engines produced after the production period cited in Recall 25V-274. GM reported receiving 6,953 complaints of post-remedy engine failure. ODI is opening this Engineering Analysisto continue investigating complaints of post-remedy engine failure. ODI is expanding the scope of this Investigation to include engines produced after the production period cited in the recall. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

RQ26001 · Loss Of Motive Power Due To Engine Failure Post Recall Remedy

Opened Jan 16, 2026 · Closed Aug 20, 2026

Status: closed (inferred from source dates) · Engine

On January 16, 2026, the Office of Defects Investigation (ODI) opened Recall Query RQ26001.  This investigation was opened to assess the remedy effectiveness of Recall 25V-274. ODI has received complaints alleging engine failure in vehicles after the recall remedy had been completed, whether that remedy involved an oil viscosity change or a complete engine replacement. General Motors (GM) issued Recall 25V-274 to address concerns of engine failure in the L87 engines produced between March 1, 2021 and May 31, 2024. GM cited the root cause as a supplier manufacturing and quality issue. GM’s recall remedy for Recall 25V-274 consisted of two different repairs, either an oil viscosity change or an engine replacement, based on the results of the remedy inspection procedure. ODI continues to receive reports of engine failures after the completion of the recall remedy. To date, ODI has received 499 complaints alleging post-remedy engine failure in vehicles subject to Recall 25V-274, 473 of which involved an oil viscosity change and 26 a complete engine replacement. GM reported receiving 6,953 complaints of post-remedy engine failure. ODI will close this RQ and continue to investigate complaints of post-remedy engine failure for Recall 25V-274 as part of an Engineering Analysis (EA26005). To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

EA25007 · Loss Of Motive Power Due To Engine Failure

Opened Oct 23, 2025 · No close date supplied

Status: open (inferred from source dates) · Engine; Engine And Engine Cooling:engine:hard Parts Internal/mechanical

The Office of Defects Investigation (ODI) has received 1,157 reports of engine bearing failure failures in the L87 6.2L engine produced by General Motors (GM). Of the 1,157 reports received, 173 are outside of the scope of recall 25V-274. These engines are installed in Model Years (MY) 2019–2024 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2021-2024MY Chevrolet Suburban and Tahoe, GMC Yukon/Yukon XL, and Cadillac Escalade/Escalade ESV vehicles. The subject engine failures were investigated as part of a Preliminary Evaluation (PE25001).  GM determined that these engine failures were due to multiple supplier manufacturing and quality issues. GM issued recall 25V-274 to address the supplier manufacturing and quality issues produced between March 1, 2021, and May 31, 2024. Based on the issuance of recall 25V-274, NHTSA has closed PE25001. ODI continues to receive a significant number of reports of engine failure in vehicles outside the scope of 25V-274.  This presents a potential safety risk that warrants further investigation.  ODI is opening this Engineering Analysis (EA) to further evaluate the scope and severity of the potential problem and to fully assess the potential safety-related issues of vehicles built outside the recall scope. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

Additional source detail variants (2)

Engine And Engine Cooling:engine:hard Parts Internal/mechanical

The Office of Defects Investigation (ODI) has received 1,157 reports of engine bearing failure failures in the L87 6.2L engine produced by General Motors (GM). Of the 1,157 reports received, 173 are outside of the scope of recall 25V-274. These engines are installed in Model Years (MY) 2019–2024 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2021-2024MY Chevrolet Suburban and Tahoe, GMC Yukon/Yukon XL, and Cadillac Escalade/Escalade ESV vehicles. The subject engine failures were investigated as part of a Preliminary Evaluation (PE25001).  GM determined that these engine failures were due to multiple supplier manufacturing and quality issues. GM issued recall 25V-274 to address the supplier manufacturing and quality issues produced between March 1, 2021, and May 31, 2024. Based on the issuance of recall 25V-274, NHTSA has closed PE25001. ODI continues to receive a significant number of reports of engine failure in vehicles outside the scope of 25V-274.  This presents a potential safety risk that warrants further investigation.  ODI is opening this Engineering Analysis (EA) to further evaluate the scope and severity of the potential problem and to fully assess the potential safety-related issues of vehicles built outside the recall scope. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

Engine

The Office of Defects Investigation (ODI) has received 1,157 reports of engine bearing failure failures in the L87 6.2L engine produced by General Motors (GM). Of the 1,157 reports received, 173 are outside of the scope of recall 25V-274. These engines are installed in Model Years (MY) 2019–2024 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2021-2024MY Chevrolet Suburban and Tahoe, GMC Yukon/Yukon XL, and Cadillac Escalade/Escalade ESV vehicles. The subject engine failures were investigated as part of a Preliminary Evaluation (PE25001).  GM determined that these engine failures were due to multiple supplier manufacturing and quality issues. GM issued recall 25V-274 to address the supplier manufacturing and quality issues produced between March 1, 2021, and May 31, 2024. Based on the issuance of recall 25V-274, NHTSA has closed PE25001. ODI continues to receive a significant number of reports of engine failure in vehicles outside the scope of 25V-274.  This presents a potential safety risk that warrants further investigation.  ODI is opening this Engineering Analysis (EA) to further evaluate the scope and severity of the potential problem and to fully assess the potential safety-related issues of vehicles built outside the recall scope. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

PE25001 · Loss Of Motive Power Due To Engine Failure

Opened Jan 16, 2025 · Closed Oct 23, 2025

Status: closed (inferred from source dates) · Engine; Engine And Engine Cooling:engine:hard Parts Internal/mechanical

On January 16, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE25001 after receiving complaints and field reports concerning engine failures in MY2019-2024 GM’s full-size truck and SUV T1XX platform equipped with the L87 6.2L V8 engine. These complainants alleged engine bearing failures resulting in knocking and growling noises from the engine’s bottom end and in some cases more severe consequences such as broken connecting rods leading to engine damage, or engine failure. If the engine fails during vehicle operation, the vehicle will lose propulsion, increasing the risk of a crash. On April 24, 2025, GM issued recall 25V-274 to address the concern with L87 engines produced between March 1, 2021, and May 31, 2024.  GM cited the root cause as a supplier manufacturing and quality issues. GM’s  recall remedy will be either an oil change to an oil with a different viscosity or engine replacement depending on the results of the remedy inspection procedure. To date, ODI has received 1,157 allegations of engine bearing failure. GM submitted 55,464 reports in total, with 29,752 unique VINs. ODI continues to receive allegations of L87 engine failures which fall outside of the scope of recall 25V-274. Based on GM’s recall, ODI will close this PE. NHTSA will continue to investigate complaints of engine failure outside the scope of recall 25V-274 as part ofEngineering Analysis (EA25007). To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Additional source detail variants (2)

Engine And Engine Cooling:engine:hard Parts Internal/mechanical

On January 16, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE25001 after receiving complaints and field reports concerning engine failures in MY2019-2024 GM’s full-size truck and SUV T1XX platform equipped with the L87 6.2L V8 engine. These complainants alleged engine bearing failures resulting in knocking and growling noises from the engine’s bottom end and in some cases more severe consequences such as broken connecting rods leading to engine damage, or engine failure. If the engine fails during vehicle operation, the vehicle will lose propulsion, increasing the risk of a crash. On April 24, 2025, GM issued recall 25V-274 to address the concern with L87 engines produced between March 1, 2021, and May 31, 2024.  GM cited the root cause as a supplier manufacturing and quality issues. GM’s  recall remedy will be either an oil change to an oil with a different viscosity or engine replacement depending on the results of the remedy inspection procedure. To date, ODI has received 1,157 allegations of engine bearing failure. GM submitted 55,464 reports in total, with 29,752 unique VINs. ODI continues to receive allegations of L87 engine failures which fall outside of the scope of recall 25V-274. Based on GM’s recall, ODI will close this PE. NHTSA will continue to investigate complaints of engine failure outside the scope of recall 25V-274 as part ofEngineering Analysis (EA25007). To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Engine

On January 16, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE25001 after receiving complaints and field reports concerning engine failures in MY2019-2024 GM’s full-size truck and SUV T1XX platform equipped with the L87 6.2L V8 engine. These complainants alleged engine bearing failures resulting in knocking and growling noises from the engine’s bottom end and in some cases more severe consequences such as broken connecting rods leading to engine damage, or engine failure. If the engine fails during vehicle operation, the vehicle will lose propulsion, increasing the risk of a crash. On April 24, 2025, GM issued recall 25V-274 to address the concern with L87 engines produced between March 1, 2021, and May 31, 2024.  GM cited the root cause as a supplier manufacturing and quality issues. GM’s  recall remedy will be either an oil change to an oil with a different viscosity or engine replacement depending on the results of the remedy inspection procedure. To date, ODI has received 1,157 allegations of engine bearing failure. GM submitted 55,464 reports in total, with 29,752 unique VINs. ODI continues to receive allegations of L87 engine failures which fall outside of the scope of recall 25V-274. Based on GM’s recall, ODI will close this PE. NHTSA will continue to investigate complaints of engine failure outside the scope of recall 25V-274 as part ofEngineering Analysis (EA25007). To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

PE21010 · Air Bag Malfunction

Opened Apr 9, 2021 · Closed Aug 24, 2023

Status: closed (inferred from source dates) · Air Bags; Air Bags:frontal; Air Bags:frontal:driver Side:inflator Module; Air Bags:srs Malfunction Warning Lamp/light

On April 9, 2021, the Office of Defects Investigations (ODI) opened PE21-010 to investigate instances of air bag malfunction indicator light (MIL) illumination and potential for frontal air bag non-deployment in several vehicles manufactured by General Motors (GM). The vehicles included model year (MY) 2020 through 2021 CT4 and CT5 passenger cars, Sierra and Silverado trucks (1500/2500/3500 models), XT4 and MY 2021 Escalade, Suburban, Tahoe, Yukon SUVs.Technical Service Bulletin (TSB) 21-NA-005, issued in March 2021, addresses air bag MIL illumination with diagnostic trouble codes (DTCs) B0001-1B or B0012-0D. It cites rust particles in the connection terminal interface of the driver air bag inflator housing as the cause of the air bag MIL illumination. Illumination of the air bag MIL under these circumstances may result in a non-deployment of the frontal driver air bag during a frontal collision and increased risk of injury to the driver.GM stated a correlation exists between production delays due to the pandemic shutdown and premature corrosion initiation on the surface of the air bag inflator housing, which, in some cases, caused rust development during a seven (7) month period of vehicle production. In the rare instance when a rust particle dislodges from the driver air bag inflator housing and enters the air bag connector prior to assembly, an intermittent resistance spike at the air bag connector may result. The condition generates excessive resistance in the air bag electrical system when the steering wheel horn cover is manipulated or the steering wheel is turned. This excessive resistance is momentary. A crash commanding air bag deployment would need to occur exactly when the momentary excessive resistance occurs. Thus, there is a very low likelihood the hazard will present a risk during a crash of sufficient severity to warrant a commanded deployment. This failure mechanism occurs early in life and results in an air bag MIL illumination that corresponds to a DTC warning the driver that the vehicle requires service. The vehicle's air bag remains functional while the MIL is illuminated, and the DTC is present.Once the connection of the driver air bag module to the clockspring is made at the plant, or at the dealership for service, there is no longer an opportunity for rust migration into the connection point. The connector is sealed and has gold terminals, eliminating the expectation of fretting corrosion. All subject vehicles passed standard corrosion validation testing for extensive corrosion with no issue of air bag non-deployment.There is a low rate of occurrence: 1.41 incidents per thousand vehicles (IPTV) for all related occurrences, and 0.04 IPTV for occurrences with a mention of visible rust and/or corrosion on the air bag inflator housing. The average occurrence mileage for the subject vehicles is approximately 2,100. Every occurrence related to the alleged defect experienced an air bag MIL illumination and there are no verified allegations of air bag non-deployment within all data sources.To date, there have been no reported fires, crashes, injuries, or fatalities related to this issue. In view of the low rate, and the nature of early-life failure, the high detectability of failures, and low potential hazard to drivers, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take additional action if warranted by new circumstances.Review the ODI reports cited above at nhtsa.gov under the following identification numbers: 11537927, 11528888, 11525020, 11521401, 11506057, 11493107, 11486767, 11441525, 11433146, 11425658, 11423440, 11385267, 11376429, 11373466, 11366995.

Additional source detail variants (4)

Air Bags:frontal:driver Side:inflator Module

On April 9, 2021, the Office of Defects Investigations (ODI) opened PE21-010 to investigate instances of air bag malfunction indicator light (MIL) illumination and potential for frontal air bag non-deployment in several vehicles manufactured by General Motors (GM). The vehicles included model year (MY) 2020 through 2021 CT4 and CT5 passenger cars, Sierra and Silverado trucks (1500/2500/3500 models), XT4 and MY 2021 Escalade, Suburban, Tahoe, Yukon SUVs.Technical Service Bulletin (TSB) 21-NA-005, issued in March 2021, addresses air bag MIL illumination with diagnostic trouble codes (DTCs) B0001-1B or B0012-0D. It cites rust particles in the connection terminal interface of the driver air bag inflator housing as the cause of the air bag MIL illumination. Illumination of the air bag MIL under these circumstances may result in a non-deployment of the frontal driver air bag during a frontal collision and increased risk of injury to the driver.GM stated a correlation exists between production delays due to the pandemic shutdown and premature corrosion initiation on the surface of the air bag inflator housing, which, in some cases, caused rust development during a seven (7) month period of vehicle production. In the rare instance when a rust particle dislodges from the driver air bag inflator housing and enters the air bag connector prior to assembly, an intermittent resistance spike at the air bag connector may result. The condition generates excessive resistance in the air bag electrical system when the steering wheel horn cover is manipulated or the steering wheel is turned. This excessive resistance is momentary. A crash commanding air bag deployment would need to occur exactly when the momentary excessive resistance occurs. Thus, there is a very low likelihood the hazard will present a risk during a crash of sufficient severity to warrant a commanded deployment. This failure mechanism occurs early in life and results in an air bag MIL illumination that corresponds to a DTC warning the driver that the vehicle requires service. The vehicle's air bag remains functional while the MIL is illuminated, and the DTC is present.Once the connection of the driver air bag module to the clockspring is made at the plant, or at the dealership for service, there is no longer an opportunity for rust migration into the connection point. The connector is sealed and has gold terminals, eliminating the expectation of fretting corrosion. All subject vehicles passed standard corrosion validation testing for extensive corrosion with no issue of air bag non-deployment.There is a low rate of occurrence: 1.41 incidents per thousand vehicles (IPTV) for all related occurrences, and 0.04 IPTV for occurrences with a mention of visible rust and/or corrosion on the air bag inflator housing. The average occurrence mileage for the subject vehicles is approximately 2,100. Every occurrence related to the alleged defect experienced an air bag MIL illumination and there are no verified allegations of air bag non-deployment within all data sources.To date, there have been no reported fires, crashes, injuries, or fatalities related to this issue. In view of the low rate, and the nature of early-life failure, the high detectability of failures, and low potential hazard to drivers, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take additional action if warranted by new circumstances.Review the ODI reports cited above at nhtsa.gov under the following identification numbers: 11537927, 11528888, 11525020, 11521401, 11506057, 11493107, 11486767, 11441525, 11433146, 11425658, 11423440, 11385267, 11376429, 11373466, 11366995.

Air Bags:frontal

On April 9, 2021, the Office of Defects Investigations (ODI) opened PE21-010 to investigate instances of air bag malfunction indicator light (MIL) illumination and potential for frontal air bag non-deployment in several vehicles manufactured by General Motors (GM). The vehicles included model year (MY) 2020 through 2021 CT4 and CT5 passenger cars, Sierra and Silverado trucks (1500/2500/3500 models), XT4 and MY 2021 Escalade, Suburban, Tahoe, Yukon SUVs.Technical Service Bulletin (TSB) 21-NA-005, issued in March 2021, addresses air bag MIL illumination with diagnostic trouble codes (DTCs) B0001-1B or B0012-0D. It cites rust particles in the connection terminal interface of the driver air bag inflator housing as the cause of the air bag MIL illumination. Illumination of the air bag MIL under these circumstances may result in a non-deployment of the frontal driver air bag during a frontal collision and increased risk of injury to the driver.GM stated a correlation exists between production delays due to the pandemic shutdown and premature corrosion initiation on the surface of the air bag inflator housing, which, in some cases, caused rust development during a seven (7) month period of vehicle production. In the rare instance when a rust particle dislodges from the driver air bag inflator housing and enters the air bag connector prior to assembly, an intermittent resistance spike at the air bag connector may result. The condition generates excessive resistance in the air bag electrical system when the steering wheel horn cover is manipulated or the steering wheel is turned. This excessive resistance is momentary. A crash commanding air bag deployment would need to occur exactly when the momentary excessive resistance occurs. Thus, there is a very low likelihood the hazard will present a risk during a crash of sufficient severity to warrant a commanded deployment. This failure mechanism occurs early in life and results in an air bag MIL illumination that corresponds to a DTC warning the driver that the vehicle requires service. The vehicle's air bag remains functional while the MIL is illuminated, and the DTC is present.Once the connection of the driver air bag module to the clockspring is made at the plant, or at the dealership for service, there is no longer an opportunity for rust migration into the connection point. The connector is sealed and has gold terminals, eliminating the expectation of fretting corrosion. All subject vehicles passed standard corrosion validation testing for extensive corrosion with no issue of air bag non-deployment.There is a low rate of occurrence: 1.41 incidents per thousand vehicles (IPTV) for all related occurrences, and 0.04 IPTV for occurrences with a mention of visible rust and/or corrosion on the air bag inflator housing. The average occurrence mileage for the subject vehicles is approximately 2,100. Every occurrence related to the alleged defect experienced an air bag MIL illumination and there are no verified allegations of air bag non-deployment within all data sources.To date, there have been no reported fires, crashes, injuries, or fatalities related to this issue. In view of the low rate, and the nature of early-life failure, the high detectability of failures, and low potential hazard to drivers, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take additional action if warranted by new circumstances.Review the ODI reports cited above at nhtsa.gov under the following identification numbers: 11537927, 11528888, 11525020, 11521401, 11506057, 11493107, 11486767, 11441525, 11433146, 11425658, 11423440, 11385267, 11376429, 11373466, 11366995.

Air Bags

On April 9, 2021, the Office of Defects Investigations (ODI) opened PE21-010 to investigate instances of air bag malfunction indicator light (MIL) illumination and potential for frontal air bag non-deployment in several vehicles manufactured by General Motors (GM). The vehicles included model year (MY) 2020 through 2021 CT4 and CT5 passenger cars, Sierra and Silverado trucks (1500/2500/3500 models), XT4 and MY 2021 Escalade, Suburban, Tahoe, Yukon SUVs.Technical Service Bulletin (TSB) 21-NA-005, issued in March 2021, addresses air bag MIL illumination with diagnostic trouble codes (DTCs) B0001-1B or B0012-0D. It cites rust particles in the connection terminal interface of the driver air bag inflator housing as the cause of the air bag MIL illumination. Illumination of the air bag MIL under these circumstances may result in a non-deployment of the frontal driver air bag during a frontal collision and increased risk of injury to the driver.GM stated a correlation exists between production delays due to the pandemic shutdown and premature corrosion initiation on the surface of the air bag inflator housing, which, in some cases, caused rust development during a seven (7) month period of vehicle production. In the rare instance when a rust particle dislodges from the driver air bag inflator housing and enters the air bag connector prior to assembly, an intermittent resistance spike at the air bag connector may result. The condition generates excessive resistance in the air bag electrical system when the steering wheel horn cover is manipulated or the steering wheel is turned. This excessive resistance is momentary. A crash commanding air bag deployment would need to occur exactly when the momentary excessive resistance occurs. Thus, there is a very low likelihood the hazard will present a risk during a crash of sufficient severity to warrant a commanded deployment. This failure mechanism occurs early in life and results in an air bag MIL illumination that corresponds to a DTC warning the driver that the vehicle requires service. The vehicle's air bag remains functional while the MIL is illuminated, and the DTC is present.Once the connection of the driver air bag module to the clockspring is made at the plant, or at the dealership for service, there is no longer an opportunity for rust migration into the connection point. The connector is sealed and has gold terminals, eliminating the expectation of fretting corrosion. All subject vehicles passed standard corrosion validation testing for extensive corrosion with no issue of air bag non-deployment.There is a low rate of occurrence: 1.41 incidents per thousand vehicles (IPTV) for all related occurrences, and 0.04 IPTV for occurrences with a mention of visible rust and/or corrosion on the air bag inflator housing. The average occurrence mileage for the subject vehicles is approximately 2,100. Every occurrence related to the alleged defect experienced an air bag MIL illumination and there are no verified allegations of air bag non-deployment within all data sources.To date, there have been no reported fires, crashes, injuries, or fatalities related to this issue. In view of the low rate, and the nature of early-life failure, the high detectability of failures, and low potential hazard to drivers, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take additional action if warranted by new circumstances.Review the ODI reports cited above at nhtsa.gov under the following identification numbers: 11537927, 11528888, 11525020, 11521401, 11506057, 11493107, 11486767, 11441525, 11433146, 11425658, 11423440, 11385267, 11376429, 11373466, 11366995.

Air Bags:srs Malfunction Warning Lamp/light

On April 9, 2021, the Office of Defects Investigations (ODI) opened PE21-010 to investigate instances of air bag malfunction indicator light (MIL) illumination and potential for frontal air bag non-deployment in several vehicles manufactured by General Motors (GM). The vehicles included model year (MY) 2020 through 2021 CT4 and CT5 passenger cars, Sierra and Silverado trucks (1500/2500/3500 models), XT4 and MY 2021 Escalade, Suburban, Tahoe, Yukon SUVs.Technical Service Bulletin (TSB) 21-NA-005, issued in March 2021, addresses air bag MIL illumination with diagnostic trouble codes (DTCs) B0001-1B or B0012-0D. It cites rust particles in the connection terminal interface of the driver air bag inflator housing as the cause of the air bag MIL illumination. Illumination of the air bag MIL under these circumstances may result in a non-deployment of the frontal driver air bag during a frontal collision and increased risk of injury to the driver.GM stated a correlation exists between production delays due to the pandemic shutdown and premature corrosion initiation on the surface of the air bag inflator housing, which, in some cases, caused rust development during a seven (7) month period of vehicle production. In the rare instance when a rust particle dislodges from the driver air bag inflator housing and enters the air bag connector prior to assembly, an intermittent resistance spike at the air bag connector may result. The condition generates excessive resistance in the air bag electrical system when the steering wheel horn cover is manipulated or the steering wheel is turned. This excessive resistance is momentary. A crash commanding air bag deployment would need to occur exactly when the momentary excessive resistance occurs. Thus, there is a very low likelihood the hazard will present a risk during a crash of sufficient severity to warrant a commanded deployment. This failure mechanism occurs early in life and results in an air bag MIL illumination that corresponds to a DTC warning the driver that the vehicle requires service. The vehicle's air bag remains functional while the MIL is illuminated, and the DTC is present.Once the connection of the driver air bag module to the clockspring is made at the plant, or at the dealership for service, there is no longer an opportunity for rust migration into the connection point. The connector is sealed and has gold terminals, eliminating the expectation of fretting corrosion. All subject vehicles passed standard corrosion validation testing for extensive corrosion with no issue of air bag non-deployment.There is a low rate of occurrence: 1.41 incidents per thousand vehicles (IPTV) for all related occurrences, and 0.04 IPTV for occurrences with a mention of visible rust and/or corrosion on the air bag inflator housing. The average occurrence mileage for the subject vehicles is approximately 2,100. Every occurrence related to the alleged defect experienced an air bag MIL illumination and there are no verified allegations of air bag non-deployment within all data sources.To date, there have been no reported fires, crashes, injuries, or fatalities related to this issue. In view of the low rate, and the nature of early-life failure, the high detectability of failures, and low potential hazard to drivers, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take additional action if warranted by new circumstances.Review the ODI reports cited above at nhtsa.gov under the following identification numbers: 11537927, 11528888, 11525020, 11521401, 11506057, 11493107, 11486767, 11441525, 11433146, 11425658, 11423440, 11385267, 11376429, 11373466, 11366995.