← New search

2013 GMC Sierra 2500

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2013 GMC Sierra 2500 do not stand out strongly from the model-year median of 46.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Sierra 2500 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

24 reports with mileage · 22 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 7 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Fuel/propulsion System. Review the 7 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Power Train. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

1 crash reports0 fire reports0 injury reports

What owners actually said

46 reports
206,000 miles · Jan 3, 2025
Fuel/propulsion System

The contact owns a 2013 GMC Sierra 2500. The contact stated while driving 60 MPH, the vehicle stalled. There was no warning light illuminated. The contact was able to coast to the side of the road, where a mobile independent mechanic diagnosed that the fuel pump had failed. The mechanic determined that the entire fuel system ass…

Read full complaint

The contact owns a 2013 GMC Sierra 2500. The contact stated while driving 60 MPH, the vehicle stalled. There was no warning light illuminated. The contact was able to coast to the side of the road, where a mobile independent mechanic diagnosed that the fuel pump had failed. The mechanic determined that the entire fuel system assembly needed to be replaced. The vehicle was not repaired. The vehicle was then towed to an unknown dealer but was not diagnosed or repaired. The vehicle was currently being towed to the residence. The manufacturer was notified of the failure and informed the contact that the repair could not be covered because the VIN was not included in a related recall and the vehicle was not covered under warranty. The failure mileage was approximately 206,000.

NHTSA ODI #11633823

Mileage unknown · Dec 18, 2024
Air BagsFuel/propulsion SystemCrash

I was traveling east bound on i26 when the Bosch fuel pump exploded and sent metal shavings throughout the fuel system. It's the same pump GM has settled a class action lawsuit when I spoke to the adjuster I was told.my truck wasn't included but yet it has the Bosch fuel pump the lawsuit is for cost me 10000 to repair. I have r…

Read full complaint

I was traveling east bound on i26 when the Bosch fuel pump exploded and sent metal shavings throughout the fuel system. It's the same pump GM has settled a class action lawsuit when I spoke to the adjuster I was told.my truck wasn't included but yet it has the Bosch fuel pump the lawsuit is for cost me 10000 to repair. I have repair bill. And then I was in a accident and the air bag curtain deployed but the passenger side and driver side did not I think there's a recall on the also.

NHTSA ODI #11631474

Mileage unknown · Aug 21, 2024
Air Bags

I get a recall notice from GM but the dealer won't do the repair without me signing a waiver for any damage they may cause to the dashboard during the recalled airbag removal. Can anyone get GM dealers to do the necessary repair and have accountability for any damage they may do?

NHTSA ODI #11610068

Mileage unknown · Aug 21, 2024
Power Train

I was hauling a load and felt a hard jolt near the transmission. The pickup went into limp mode and would not let me accelerate above 45 mph. Took it to a dealership and was told the valve body had malfunctioned. I have been without a vehicle for over 40 days due to the part being back ordered.

NHTSA ODI #11610040

Mileage unknown · Oct 24, 2023
Service Brakes

On 9/20/23 my truck suffered a brake failure in which one of the front calipers ruptured and there was a complete loss of braking. The brakes were repaired the following day and an "ABS" light remained on after the brakes were repaired and the brake lines were bled. The vehicle codes were checked and a "C0110_04 Pump motor cir…

Read full complaint

On 9/20/23 my truck suffered a brake failure in which one of the front calipers ruptured and there was a complete loss of braking. The brakes were repaired the following day and an "ABS" light remained on after the brakes were repaired and the brake lines were bled. The vehicle codes were checked and a "C0110_04 Pump motor circuit open" fault was detected. It should be noted that even though the brake system was bled and and part were replaced, there were no brakes and the vehicle could not be driven. I had the vehicle towed to Rossi GMC in Washington, NJ and they diagnosed the problem as a bad Electronic Brake Control Module and Motor. Then I was advised by their service department that no parts were available because of the General Motors strike and there was no date as to when the parts would be available. I asked if I could try to locate the parts myself and they agreed as long as they were genuine GM parts. After calling hundreds of GM/Chevy dealers I was able to locate one (1) EBCM at All American Chevrolet/Cadillac in Muncie, IN. After speaking with their parts department, they advised me that they have the part and they won't sell it to me over the phone, only in person. I live over 9 hours away from the dealer and this was not feasible. My complaint is this, although the ABS system in my truck was not functioning properly should the regular brake system still be working? If so, why is mine not. This is a HUGE safety concern considering if the ABS system were to fail at highway speeds this could cause a bad crash.

NHTSA ODI #11551659

Mileage unknown · Oct 4, 2023
Power Train

TCM has failed and no replacement available

NHTSA ODI #11548158

Mileage unknown · Sep 22, 2023
Engine And Engine Cooling

Check engine light came on and vehicle began to have issues with transmission

NHTSA ODI #11545974

Mileage unknown · Sep 8, 2023
Electrical SystemPower Train

Transmission Control Module I was at an intersection when the TCM malfunctioned halfway through and I lost all power to my motor. I was pulling a large trailer and cross traffic had to slam on brakes to keep from hitting me. My truck will not move faster that a few miles an hour now that it is in limp mode. I am a police offi…

Read full complaint

Transmission Control Module I was at an intersection when the TCM malfunctioned halfway through and I lost all power to my motor. I was pulling a large trailer and cross traffic had to slam on brakes to keep from hitting me. My truck will not move faster that a few miles an hour now that it is in limp mode. I am a police officer and I had an onboard diagnostic tool that showed that there was no communication to the TCM. Stabilitrack warning lamp and check engine light are now on. It all happened at once no warning.

NHTSA ODI #11543326

118,116 miles · Sep 5, 2023
Power Train

Transmission Control Module failure The TCM went out one day with no warning. Sitting at a red light, the light turned green, I started to go, and got about 20 feet into the intersection when suddenly it was like my truck shifted into neutral gear. Motor would rev but I couldn't move forward or backward. I was stuck in the middl…

Read full complaint

Transmission Control Module failure The TCM went out one day with no warning. Sitting at a red light, the light turned green, I started to go, and got about 20 feet into the intersection when suddenly it was like my truck shifted into neutral gear. Motor would rev but I couldn't move forward or backward. I was stuck in the middle of a busy intersection. My check engine light came on and the vehicle stability control light began flashing, it was as if everything in my truck was going haywire. I turned my hazards on as vehicles were whizzing by us, barely missing us. My wife and I got out and with the help of a few other drivers we attempted to push the truck out of the roadway but it was too heavy. We got back in and when I started the truck, all the lights were still on but this time it went into gear and we were able to leave the intersection under our own power. I was able to drive the vehicle to the dealership in 2nd gear. Luckily it was close. They diagnosed the vehicle. Code U-0101 lost communication with TCM was the diagnosis. Unfortunately, that part was on back order and it took 9 months to get one. Dealership replaced the part and all has been we'll since then.

NHTSA ODI #11542705

Mileage unknown · Aug 24, 2023
Unknown Or Other

I was driving and the transmission control module failed, putting the truck into limp mode with no prior warning. This was a hazard to myself and other drivers as it happened on a very busy road. I use this truck to pull our fifth wheel camper and luckily we were not pulling the camper at that time or this could’ve been a lot wo…

Read full complaint

I was driving and the transmission control module failed, putting the truck into limp mode with no prior warning. This was a hazard to myself and other drivers as it happened on a very busy road. I use this truck to pull our fifth wheel camper and luckily we were not pulling the camper at that time or this could’ve been a lot worse with the truck just stalling putting my families safety at risk and being broke down in the middle of nowhere. I took the truck to a repair shop in the city that I live in and it was confirmed that the TCM was bad. Tried to order a new TCM and they are back ordered for months and even over a year. Had to send it into a company in South Carolina for repair of the TCM with a cost of approximately $1300. There are thousands of people with this issue, and this should’ve been addressed by GM and a recall sent out to the owners of the vehicles. After the truck went into limp mode, there was a error message but no other prior warning.

NHTSA ODI #11540468

Official recalls

3

21V053000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2013 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2010 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, GM is recalling certain 2009 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C."

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 24, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on May 11, 2021. Owners may contact Cadillac customer service at 1-800-458-8006; Chevrolet customer service at 1-800-222-1020; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328790.

21V054000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally GM is recalling certain 2011-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, Yukon XL and 2011-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Additionally, GM is recalling certain 2010-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL and 2010-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 25, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed to 40 VIN owners on May 11, 2021. A second owner notification letter was mailed to all other owners on January 24, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328800.

18V267000 · Equipment

Apr 26, 2018

General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana vehicles, equipped with certain Plastic-Handle Fire Extinguishers or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Consequence & remedy

Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy: GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Isuzu customer service at 1-866-441-9638. GM's number for this recall is 18146.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.