← New search

2012 GMC Sierra 1500

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2012 GMC Sierra 1500 do not stand out strongly from the model-year median of 181.

About this comparison →

When problems were reported

Mileage at the reported incident

67 reports with mileage · 40 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 42 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Structure. Review the 21 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

4 crash reports0 fire reports1 injury reports

Unknown Or Other complaints

36 reports
Clear category filter
55,000 miles · Nov 6, 2018
Unknown Or Other

GOT IN THE TRUCK A YEAR AGO AND NOTICED A CRACK IN MY DASH ABOVE THE INSTRUMENT CLUSTER, AFTER FURTHER INSPECTION I NOTICE 2 MORE CRACKS BOTH BY THE PASSENGER AIRBAG. THIS HAPPENED AT AROUND 55,000 MILES. THIS VEHICLE WAS STATIONARY AT THE TIME I NOTICED THE CRACKS

NHTSA ODI #11149608

68,667 miles · Oct 17, 2018
Unknown Or Other

PASSENGER DOOR HANDLE SOMEHOW BECAME DISENGAGED AND JUST FULLS OUT LOOSELY. HAVE TO GET IN AND OPEN FROM INSIDE. IT APPEARS TO HAVE A PLASTIC HOOK ON THE HANDEL THAT MUST HAVE DISENGAGED FROM SOMETHING INSIDE THE DOOR. DOOR HARDLY GETS USED. IS THIS ACOVERED PROBLEM???

NHTSA ODI #11140842

95,000 miles · May 26, 2018
Air BagsUnknown Or Other

SEVERE CRACKING DASHBOARD

NHTSA ODI #11098102

73,900 miles · Apr 9, 2018
Air BagsUnknown Or Other

DASH CRACKED TOP LEFT CORNER WHERE AIR BAG FITS INTO THE DASH

NHTSA ODI #11084052

78,000 miles · Jan 2, 2018
Unknown Or Other

CRACKED DASHBOARD - THE DASHBOARD ON MY 2012 GMC SIERRA 1500 SERIES TRUCK HAS CRACKED ON BOTH THE DRIVER AND PASSENGER SIDE. NOW, DUE TO THE SEVERE COLD, THE CRACK ON THE DRIVER'S SIDE IS EXPANDING DUE TO THE EXPANSION AND CONTRACTION OF THE PLASTIC THRU INTERIOR HEATING AND RAPID COOLING OF THE VEHICLE. THESE CRACKS OCCURRED …

Read full complaint

CRACKED DASHBOARD - THE DASHBOARD ON MY 2012 GMC SIERRA 1500 SERIES TRUCK HAS CRACKED ON BOTH THE DRIVER AND PASSENGER SIDE. NOW, DUE TO THE SEVERE COLD, THE CRACK ON THE DRIVER'S SIDE IS EXPANDING DUE TO THE EXPANSION AND CONTRACTION OF THE PLASTIC THRU INTERIOR HEATING AND RAPID COOLING OF THE VEHICLE. THESE CRACKS OCCURRED DURING NORMAL DRIVING CONDITIONS ON STATE HIGHWAYS AND INTERSTATES.

NHTSA ODI #11058014

44,500 miles · Dec 10, 2017
Unknown Or Other

DASH CRACKED ON PASSENGER SIDE ABOVE AIR BAG. IT CRACKED WHEN THE VEHICLE WAS PARKED, AND WAS RUNNING TO HEAT THE VEHICLE WITH THE HEATER AND DEFROST. INTERIOR TEMPERATURE WAS SET TO 75, OUTSIDE TEMPERATURE WAS AROUND 35. DASH CRACK EXTENDS FROM THE AIR BAG WHICH APPEARS TO CAUSE A SAFETY ISSUE.

NHTSA ODI #11053724

40,000 miles · Sep 21, 2017
Unknown Or Other

TAKATA RECALL DASH IS CRACK ON THE TOP AT AIRBAG AFRAID IN A CRASH THAT THE BAG CAN LUNCH SHARDS IN TO PASSENGERS OR THE BAG WILL BE RIPPED WHEN DEPLOYED

NHTSA ODI #11024791

Mileage unknown · Aug 14, 2017
Air BagsUnknown Or Other

DASH HAS CRACKED FROM THE PASSENGER SIDE AIRBAG TO THE FRONT OF DASH CAP AND ALONG INSTRUMENT CLUSTER TO THE FRONT OF DASH CAP. THIS CAN EASILY CAUSE A PROBLEM SHOULD THE AIRBAG GO OFF. AT THIS POINT I BELIEVE THE CENTER OF THE DASH WOULD SHATTER SENDING SHRAPNEL TO EVERY DIRECTION INSIDE THE TRUCK SHOULD THE AIRBAG GO OFF OR A …

Read full complaint

DASH HAS CRACKED FROM THE PASSENGER SIDE AIRBAG TO THE FRONT OF DASH CAP AND ALONG INSTRUMENT CLUSTER TO THE FRONT OF DASH CAP. THIS CAN EASILY CAUSE A PROBLEM SHOULD THE AIRBAG GO OFF. AT THIS POINT I BELIEVE THE CENTER OF THE DASH WOULD SHATTER SENDING SHRAPNEL TO EVERY DIRECTION INSIDE THE TRUCK SHOULD THE AIRBAG GO OFF OR A COLLISION. FOR ME TO REPLACE THIS IS GOING TO COST $1000.00 THIS IS GMC'S RESPONSIBILITY FOR POOR ENGINEERING AND POOR QUALITY. THEY SHOULD FIX THIS BEFORE SOMEONE GETS SERIOUSLY HURT OR KILLED! I SHOULDN'T HAVE TO SPEND $1000.00 ON A $60,000.00 TRUCK BECAUSE THE DASH ISN'T SUPPORTED PROPERLY TO KEEP FROM FALLING APART. BESIDES, WHY SPEND $1000.00 ON A NEW ONE WHEN IT'S JUST GOING TO CRACK AGAIN. STRUCTURAL FLAW!!

NHTSA ODI #11014973

37,000 miles · Aug 13, 2017
Air BagsUnknown Or Other

DASHBOARD SURROUNDING AIRBAG AND INSTRUMENT CLUSTER IS CRACKING AND ESSENTIALLY DISINTEGRATING. IF MY AIRBAG DEPLOYS OR I'M INVOLVED IN A COLLISION THESE SHARP PLASTIC FRAGMENTS WILL BECOME A SAFETY HAZARD. THIS TRUCK HAS 38K MILES AND IS IN OTHERWISE PRISTINE CONDITION WITH ZERO SCRATCHES ON THE INTERIOR PARTS ASIDE FROM THES…

Read full complaint

DASHBOARD SURROUNDING AIRBAG AND INSTRUMENT CLUSTER IS CRACKING AND ESSENTIALLY DISINTEGRATING. IF MY AIRBAG DEPLOYS OR I'M INVOLVED IN A COLLISION THESE SHARP PLASTIC FRAGMENTS WILL BECOME A SAFETY HAZARD. THIS TRUCK HAS 38K MILES AND IS IN OTHERWISE PRISTINE CONDITION WITH ZERO SCRATCHES ON THE INTERIOR PARTS ASIDE FROM THESE DASH CRACKS. THE PLASTIC IS PROTECTED EVERY THREE MONTHS AT LEAST WITH AEROSPACE 303 AND PROTECTED FROM SUNLIGHT WHEN NOT IN USE. THIS IS NOT A MAINTENANCE ISSUE, IT'S A STRUCTURAL DEFECT. THOUSANDS OF THESE VEHICLES ARE AFFECTED.

NHTSA ODI #11014905

51,000 miles · Jul 20, 2017
Air BagsUnknown Or Other

DASH HAS CRACKED AROUND PASSENGER SAFETY BAG.

NHTSA ODI #11006499

Official recalls

3

21V051000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 22, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on May 11, 2021. Owners may contact Cadillac customer service at 1-800-458-8006; Chevrolet customer service at 1-800-222-1020; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328770.

21V054000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally GM is recalling certain 2011-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, Yukon XL and 2011-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Additionally, GM is recalling certain 2010-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL and 2010-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 25, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed to 40 VIN owners on May 11, 2021. A second owner notification letter was mailed to all other owners on January 24, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328800.

18V267000 · Equipment

Apr 26, 2018

General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana vehicles, equipped with certain Plastic-Handle Fire Extinguishers or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Consequence & remedy

Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy: GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Isuzu customer service at 1-866-441-9638. GM's number for this recall is 18146.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

2

DP22005 · Pedestrian Alert Sounds

Opened Jan 27, 2023 · Closed Aug 7, 2023

Status: closed (inferred from source dates) · Electrical System:propulsion System

NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.