IllustrationWhile vehicle approached a hazard blocking the roadway the forward collision and automatic braking feature did not engage; apparently due to the vehicle sensors not recognizing the hazard. The object in the roadway was a 53 ft van trailer that was laid on it's side with the translucent roof facing the approaching vehicle.
2021 Freightliner Cascadia
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Cascadia years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 2 of 14 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Tires. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Forward Collision Avoidance. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports0 fire reports1 injury reports
What owners actually said
14 reportsWhen driving, there is a constant and very strong vibration throughout the entirety of the truck. This makes it difficult to steer and drive in a safe manner. I've replaced any parts that might be associated with this malfunction with brand new parts at the advice of professional mechanics (cost over $30,000) and it was to no av…
Read full complaint
When driving, there is a constant and very strong vibration throughout the entirety of the truck. This makes it difficult to steer and drive in a safe manner. I've replaced any parts that might be associated with this malfunction with brand new parts at the advice of professional mechanics (cost over $30,000) and it was to no avail. The truck is still malfunctioning and I have been left unable to work or barely working for 14 months. The vibration has caused many health concerns, like headaches, nausea, and stomach ulcers. I went to over 10 dealers and there has been no solutions that have worked.
My Emplyoer has not fixed anything on the truck, the truck shouldn’t be operating, doesn’t meet DOT Regulations, I was told not to go into any scales or weigh stations, loses air and the air doesn’t build back up properly, I lost all air in my breaks while driving on the road
I'd like to report the automatic braking device on our company semi tractor. I work for a large mega carrier hauling all types of freight, with triples and doubles combination trailers. We operate with Freightliners, Kenworths, and Internationals. The tractor tractor I use is a 2021 Freightliner equipped with a safety feature, a…
Read full complaint
I'd like to report the automatic braking device on our company semi tractor. I work for a large mega carrier hauling all types of freight, with triples and doubles combination trailers. We operate with Freightliners, Kenworths, and Internationals. The tractor tractor I use is a 2021 Freightliner equipped with a safety feature, an automatic braking system to avoid collisions for stopped or slowed traffic ahead. The issue is, it randomly brakes with no obstructions ahead. I've seen reports that you guys are looking into this. And I'm also informing you that our trucks deal with this issue as well. There's no defect warnings on the device's monitor system. No previous accidents that would cause issues to the device to have faulty sensor. The problem with the system, it sees a shadow on the road and it thinks theres a stopped vehicle, forcing the truck to hard apply the brakes. This can be extremely dangerous on inclement weather, more so on icy conditions. Few weeks ago, I traveled through the same part of the toll road like I always do, I know this spot activates the brakes 70-85% of the time during the night. That night, my trailers ABS light was on, when I approached the bad spot, all my brakes activated and almost caused my truck to jack-knife, lost full control but didn't crash, nor was anyone near me. But it would've been a different outcome if it was bad weather. When I approach this area, I always turn on my high beams to try to eliminate the shadow on the road. Where this happens: Indiana Toll Road 80-90, Elkhart IN, West bound lanes, right before exit 92. The overpass that causes this shadow is Johnson Street. You can see on Google street maps, where other trucks have had automatic braking activated, from seeing tire marks on the road. The lights around create that shadow at night. I would just like to inform you guys of my experiences. I have also reached out to INDOT about the issue, not sure if they looked into it. Reporting before a crash could happen.
The contact owns a 2021 Freightliner Cascadia. The contact stated while driving 65 MPH with the cruise control activated, the brakes applied independently. The contact took the vehicle to the local dealer, where it was diagnosed with needing the calibration of the radar. The vehicle was repaired but experienced the failure withi…
Read full complaint
The contact owns a 2021 Freightliner Cascadia. The contact stated while driving 65 MPH with the cruise control activated, the brakes applied independently. The contact took the vehicle to the local dealer, where it was diagnosed with needing the calibration of the radar. The vehicle was repaired but experienced the failure within a week. The contact took the vehicle back to the local dealer, where it was diagnosed with needing the radar to be replaced. The vehicle was repaired but continued to experience the same failure within a month. The contact took the vehicle back a third time to the local dealer, where it was diagnosed with needing the recalibration of the radar. The vehicle was repaired but continued to experience the failure intermittently. The contact called the local dealer and made them aware of the failure. The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 215,000.
This complaint is being filed in addition to my previous complaint which is complaint #1147128511471285. Both left and right vehicle airbag suspension height regulators were just replace a month ago, and once again, the right side airbag ride height regulator has blown apart, causing my semi truck to lean heavily to the right s…
Read full complaint
This complaint is being filed in addition to my previous complaint which is complaint #1147128511471285. Both left and right vehicle airbag suspension height regulators were just replace a month ago, and once again, the right side airbag ride height regulator has blown apart, causing my semi truck to lean heavily to the right side, and wear out my right front steer tire exceedingly fast. And, the radar braking system erratically slams the brakes on at random times, which could cause a catastrophic accident. Imagine hauling an 80,000 lb. load, and the truck just decides to slam on the brakes, in a corner, in the rain, or in the snow. You’re riding a very thin line between life and death. Freightliner will now be sued for negligence, embezzlement, fraud, and loss of use of my truck. My truck just spent 40 days at the Freightliner Dealership for several Factory Safety Recalls, and they just replaced both airbag ride height control vale’s, because they both failed. If this isn’t a clear cut case of the Federal Lemon Law, nothing is.
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is drivers side steer front tire. The tire blew out and resulted in loss of vehicle control. This failure DID cause an accident putting others safety at risk. Both Freightliner Corp. and Michelin Tire Co. are aware of this failure. No one has inspected the ti…
Read full complaint
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is drivers side steer front tire. The tire blew out and resulted in loss of vehicle control. This failure DID cause an accident putting others safety at risk. Both Freightliner Corp. and Michelin Tire Co. are aware of this failure. No one has inspected the tire. I DO NOT have the tire in my possession yet. There are/were no warning, messages or symptoms of this problem prior to. This truck had a right side tire failure at the decoupling groove on May 11, 2022. The tire was replaced at that time with a new tire tire. This truck returned to Toledo Ohio to our terminal. The 4X4X4 air fairings were then removed at the request of DTNA. On 8-5-22 with 52,742 miles on the tire, it blew out resulting in an accident.
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is passenger side steer front tire. The outside edge decoupling groove/sidewall failed. Risks include potential tire blow resulting in loss of vehicle control. This failure could cause an accident putting others safety at risk. Both Freightliner Corp. and Mic…
Read full complaint
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is passenger side steer front tire. The outside edge decoupling groove/sidewall failed. Risks include potential tire blow resulting in loss of vehicle control. This failure could cause an accident putting others safety at risk. Both Freightliner Corp. and Michelin Tire Co. are aware of this failure. No one has inspected the tire. I have the tire in my possession. There are/were no warning, messages or symptoms of this problem prior to. Michelin Tire Co. sent us 2 new tires and requested we remove the air fairing to see if this could resolve the problem. At the time we proceeded with this request the truck had 315,805 miles on it. On 6-20-22 Michelin Tire Co. supplied Freightliner Corp. with a tech bulletin regarding the decoupling groove failure. At 455,485 miles this tire was showing signs of decoupling failure. This failure appeared to be within the guide lines of the tech bulletin. At 465,523 miles the tire showed excessive decoupling groove failure in multiple spots. Mileage on tire at the time of failure was 149,718 miles.
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is the passenger steer front tire. The outside edge decoupling groove/sidewall failed. Risks include potential tire blow resulting in loss of vehicle control. This failure could cause an accident putting others safety at risk. Both Freightliner Corp. and Miche…
Read full complaint
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is the passenger steer front tire. The outside edge decoupling groove/sidewall failed. Risks include potential tire blow resulting in loss of vehicle control. This failure could cause an accident putting others safety at risk. Both Freightliner Corp. and Michelin Tire Co. are aware of this failure. No one has inspected the tire. I have the tire in my possession. There are/were no warning, messages or symptoms of this problem prior to. This truck was built with a 4X4X4 front air fairing that was removed after this failure by the request of Freighliner Corp. Mileage on tire at the time of failure was 71,000 miles.
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is drivers side steer front tire. The outside edge decoupling groove/sidewall failed. Risks include potential tire blow resulting in loss of vehicle control. This failure could cause an accident putting others safety at risk. Both Freightliner Corp. and Mi…
Read full complaint
TIRE SIZE: 275/80 R22.5 MICHELIN ENERGY LINE Z Component that failed is drivers side steer front tire. The outside edge decoupling groove/sidewall failed. Risks include potential tire blow resulting in loss of vehicle control. This failure could cause an accident putting others safety at risk. Both Freightliner Corp. and Michelin Tire Co. are aware of this failure. No one has inspected the tire. I have the tire in my possession. There are/were no warning, messages or symptoms of this problem prior to. This truck was built with a 4X4X4 front air fairing that was removed after this failure by the request of Freighliner Corp. Mileage on tire at the time of failure was 165,782 miles.
Official recalls
2126V583000 · Electronic Stability Control (esc); Service Brakes, Air:antilock
Sep 9, 2026
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner Cascadia and 2022 Western Star 49X vehicles previously repaired incorrectly under recall numbers 23V073 or 22V817. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to one side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence & remedy
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will replace the brake modulator valves, free of charge. Owner notification letters are expected to be mailed November 8, 2026. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is F1039. Vehicles repaired under the prior recalls will need the new repair completed.
Additional source detail variants (2)
Electronic Stability Control (esc)
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner Cascadia and 2022 Western Star 49X vehicles previously repaired incorrectly under recall numbers 23V073 or 22V817. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to one side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will replace the brake modulator valves, free of charge. Owner notification letters are expected to be mailed November 8, 2026. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is F1039. Vehicles repaired under the prior recalls will need the new repair completed.
Service Brakes, Air:antilock
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner Cascadia and 2022 Western Star 49X vehicles previously repaired incorrectly under recall numbers 23V073 or 22V817. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to one side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will replace the brake modulator valves, free of charge. Owner notification letters are expected to be mailed November 8, 2026. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is F1039. Vehicles repaired under the prior recalls will need the new repair completed.
23V299000 · Electronic Stability Control (esc)
Apr 26, 2023
Daimler Trucks North America, LLC (DTNA) is recalling certain short wheelbase 2020-2024 Freightliner Cascadia, 2021-2024 Freightliner M2 Business Class, 2022 Western Star 4700, and 2020 Freightliner Classic Cascadia vehicles. The vehicle is equipped with an electronic stability control system and tire combination that may understeer during a J-turn. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 136, "Electronic Stability Control Systems on Heavy Vehicles."
Consequence & remedy
Consequence: Understeering during a J-turn may increase the risk of a crash.
Remedy: DTNA will replace the tires, free of charge. Owner notification letters were mailed June 19, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL971.
23V208000 · Exterior Lighting; Exterior Lighting:hazard Flashing Warning Lights
Mar 28, 2023
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2021 Freightliner Cascadia and Western Star 49X vehicles. The hazard warning lights may flash improperly during an Advanced Braking Assist event. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: Hazard warning lights that flash improperly may cause confusion for other drivers, increasing the risk of a crash.
Remedy: Dealers will update the software controlling the hazard warning lights, free of charge. Owner notification letters were mailed May 18, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL851.
Additional source detail variants (2)
Exterior Lighting:hazard Flashing Warning Lights
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2021 Freightliner Cascadia and Western Star 49X vehicles. The hazard warning lights may flash improperly during an Advanced Braking Assist event. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence: Hazard warning lights that flash improperly may cause confusion for other drivers, increasing the risk of a crash.
Remedy: Dealers will update the software controlling the hazard warning lights, free of charge. Owner notification letters were mailed May 18, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL851.
Exterior Lighting
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2021 Freightliner Cascadia and Western Star 49X vehicles. The hazard warning lights may flash improperly during an Advanced Braking Assist event. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence: Hazard warning lights that flash improperly may cause confusion for other drivers, increasing the risk of a crash.
Remedy: Dealers will update the software controlling the hazard warning lights, free of charge. Owner notification letters were mailed May 18, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL851.
23V073000 · Electronic Stability Control (esc); Service Brakes, Air:antilock:modulator
Feb 10, 2023
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence & remedy
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
Additional source detail variants (2)
Electronic Stability Control (esc)
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
Service Brakes, Air:antilock:modulator
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
22V919000 · Tires; Wheels:rim
Dec 12, 2022
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner 114SD, 2023 Freightliner 122SD, 2020 Western Star 4700, 2019-2022 Western Star 4900, 2019-2023 Freightliner Business Class M2, and 2021 Freightliner Cascadia vehicles. The vehicles are equipped with tires that are not compatible with their 8.25-inch rims. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars."
Consequence & remedy
Consequence: Driving with tires that are not compatible with their rims can reduce tire performance, increasing the risk of a crash.
Remedy: Dealers will replace the tires, free of charge. Owner notification letters were mailed June 2, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-962.
Additional source detail variants (2)
Tires
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner 114SD, 2023 Freightliner 122SD, 2020 Western Star 4700, 2019-2022 Western Star 4900, 2019-2023 Freightliner Business Class M2, and 2021 Freightliner Cascadia vehicles. The vehicles are equipped with tires that are not compatible with their 8.25-inch rims. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars."
Consequence: Driving with tires that are not compatible with their rims can reduce tire performance, increasing the risk of a crash.
Remedy: Dealers will replace the tires, free of charge. Owner notification letters were mailed June 2, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-962.
Wheels:rim
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner 114SD, 2023 Freightliner 122SD, 2020 Western Star 4700, 2019-2022 Western Star 4900, 2019-2023 Freightliner Business Class M2, and 2021 Freightliner Cascadia vehicles. The vehicles are equipped with tires that are not compatible with their 8.25-inch rims. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars."
Consequence: Driving with tires that are not compatible with their rims can reduce tire performance, increasing the risk of a crash.
Remedy: Dealers will replace the tires, free of charge. Owner notification letters were mailed June 2, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-962.
22V817000 · Forward Collision Avoidance: Adaptive Cruise Control; Service Brakes, Air:antilock:modulator
Nov 1, 2022
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Consequence & remedy
Consequence: Brakes that pull to one side during an ACC braking event may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
Additional source detail variants (2)
Service Brakes, Air:antilock:modulator
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Consequence: Brakes that pull to one side during an ACC braking event may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
Forward Collision Avoidance: Adaptive Cruise Control
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Consequence: Brakes that pull to one side during an ACC braking event may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
20V567000 · Exterior Lighting:brake Lights
Feb 16, 2022
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released.
Consequence & remedy
Consequence: If the brake lights remain illuminated, drivers may be unaware when the truck is actually slowing or stopping, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the 3-pin brake pressure switch with a 2-pin brake pressure switch along with a jumper harness, free of charge. DTNA issued owners an interim notification on November 17, 2020. Owner notification letters were mailed on November 21, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-863.
21V965000 · Fuel System, Diesel:fuel Injection System:fuel Rail
Dec 13, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2022 Western Star 4700, 2019-2022 Freightliner 114SD, 2021-2022 Western Star 49X, Freightliner Cascadia P4, 2022 Western Star 47X, 2021 Western Star WF110, 2020 Western Star WJ121, and 2019-2021 FCCC XCP Chassis vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak.
Consequence & remedy
Consequence: A high pressure fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Dealers will replace the fuel tubes, and install vibration isolators, free of charge. Owner notification letters were mailed January 28, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-915.
21V689000 · Steering:linkages:drag:link:connection
Sep 2, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Classic Cascadia and 2019-2021 Freightliner Cascadia trucks. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm.
Consequence & remedy
Consequence: Drag link separation can cause a complete loss of steering control, increasing the risk of a crash.
Remedy: DTNA will inspect the drag link taper joint and repair it as necessary, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact DTNA's customer service at 1-800-547-0712. DTNA's number for this recall is FL-900.
21V481000 · Electrical SYSTEM:12V/24V/48V Battery:cables
Jun 25, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2022 Freightliner Cascadia P4, 2021 Western Star WH126, 2020 Western Star WJ121, and 2021-2022 Western Star 49X vehicles. The battery cable terminal may break, resulting in a loss of electrical power and unintended engine stall.
Consequence & remedy
Consequence: An engine stall increases the risk of a crash.
Remedy: Dealers will repair or replace the battery cables, free of charge. Owner notification letters were mailed on January 7, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-893.
21V369000 · Steering:linkages:tie Rod Assembly
May 19, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner 114SD, 122SD, Business Class M2, Cascadia, 108SD, Western Star 4900, 4700, 5700, Custom Chass RV Chassis, Custom Chass S2 Chassis, Custom Chass XC Chassis, Custom Chass XB Chassis, and Custom Chass MT Chassis. The tie rod clamps may be loose, which could result in loose tie rod ends that could break or detach.
Consequence & remedy
Consequence: Detached or broken tie rod ends can result in steering loss, increasing the risk of a crash.
Remedy: Dealers will replace the tie rod clamp bolts and nuts, free of charge. Owner notification letters were mailed December 23, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-888.
21V357000 · Exterior Lighting:headlights:bulbs
May 14, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2022 Freightliner Cascadia vehicles equipped with halogen headlight assemblies. The halogen headlight bulb may dislodge during replacement and contact other vehicle components, possibly causing them to melt.
Consequence & remedy
Consequence: Melting components can increase the risk of fire.
Remedy: Dealers will install a foam grommet, cut a 4-inch access hole into the inner fender, and add a warning label on both fenders, free of charge. Owner notification letters were mailed on July 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-887.
21V256000 · Steering:critical Fasteners; Steering:linkages:tie Rod Assembly
Apr 12, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner Cascadia, Business Class M2, 114SD, 108SD, 122SD, Custom Chass S2 Chassis, Custom Chass XB Chassis, Custom Chass XC Chassis, and Custom Chass MT Chassis Western Star 4700, 4900, 5700 vehicles. The steering arm and tie rod bolts may have a defective seam that can fracture.
Consequence & remedy
Consequence: A fractured bolt may cause a loss of steering, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the tie rod arm and steering arm bolts, free of charge. The recall began on June 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-884.
Additional source detail variants (2)
Steering:linkages:tie Rod Assembly
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner Cascadia, Business Class M2, 114SD, 108SD, 122SD, Custom Chass S2 Chassis, Custom Chass XB Chassis, Custom Chass XC Chassis, and Custom Chass MT Chassis Western Star 4700, 4900, 5700 vehicles. The steering arm and tie rod bolts may have a defective seam that can fracture.
Consequence: A fractured bolt may cause a loss of steering, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the tie rod arm and steering arm bolts, free of charge. The recall began on June 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-884.
Steering:critical Fasteners
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner Cascadia, Business Class M2, 114SD, 108SD, 122SD, Custom Chass S2 Chassis, Custom Chass XB Chassis, Custom Chass XC Chassis, and Custom Chass MT Chassis Western Star 4700, 4900, 5700 vehicles. The steering arm and tie rod bolts may have a defective seam that can fracture.
Consequence: A fractured bolt may cause a loss of steering, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the tie rod arm and steering arm bolts, free of charge. The recall began on June 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-884.
21V209000 · Power Train:clutch Assembly
Mar 24, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021 Freightliner Cascadia and Western Star 4700 vehicles. The clutch flange may break.
Consequence & remedy
Consequence: If flange failure occurs, loose parts may fall into the clutch pressure plate assembly, resulting in clutch disengagement, thereby increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the clutch on the affected vehicles, free of charge. The recall began on May 7, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-881.
21V073000 · Engine
Feb 12, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner Cascadia vehicles equipped with a Cummins X15 engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.
Consequence & remedy
Consequence: A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.
Remedy: DTNA will work with the engine manufacturer Cummins Inc. to notify owners, and Cummins dealers will properly torque the capscrews and inspect for possible damage and, if necessary, repair any damage found, free of charge. The recall is expected to begin April 12, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-875.
21V018000 · Service Brakes, Hydraulic:foundation Components:disc:caliper
Jan 20, 2021
Daimler Trucks North America, LLC (DTNA) is recalling 2021 Western Star 4700 and 5700, Freightliner Business Class M2, Cascadia, and Custom Chassis XC Chassis vehicles manufactured with a certain steering arm configuration with air disc brakes identified by the axle assembly supplier. On certain vehicles, one of the six brake caliper mounting bolts on the driver side steer axle may have been incorrectly tightened.
Consequence & remedy
Consequence: The loose bolt could result in the other caliper bolts to loosen. Insufficiently tightened bolts may not provide adequate clamping force between the brake caliper and brake anchor plate, resulting in reduced brake effectiveness, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will inspect and repair as necessary, free of charge. The recall began March 17, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-873.
21V007000 · Tires; Tires:tread/belt
Jan 13, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2022 Freightliner Cascadia sleeper trucks equipped with Bridgestone R284, R268, or R283S ECOPIA steer axle tires in conjunction with a specific air dam. The steer tires may experience tread separation or blow-outs while driving.
Consequence & remedy
Consequence: Tread separation and/or blow-outs while driving may result in a loss of vehicle control, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the steer tires, free of charge. The recall began March 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL872.
Additional source detail variants (2)
Tires:tread/belt
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2022 Freightliner Cascadia sleeper trucks equipped with Bridgestone R284, R268, or R283S ECOPIA steer axle tires in conjunction with a specific air dam. The steer tires may experience tread separation or blow-outs while driving.
Consequence: Tread separation and/or blow-outs while driving may result in a loss of vehicle control, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the steer tires, free of charge. The recall began March 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL872.
Tires
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2022 Freightliner Cascadia sleeper trucks equipped with Bridgestone R284, R268, or R283S ECOPIA steer axle tires in conjunction with a specific air dam. The steer tires may experience tread separation or blow-outs while driving.
Consequence: Tread separation and/or blow-outs while driving may result in a loss of vehicle control, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the steer tires, free of charge. The recall began March 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL872.
20V742000 · Power Train:clutch Assembly
Nov 30, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2021 Freightliner Cascadia vehicles. The clutch flange may break due to the heat treating and stamping process.
Consequence & remedy
Consequence: If flange failure occurs, loose parts may fall into the clutch pressure plate assembly, resulting in clutch disengagement, thereby increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the clutch on the affected vehicles, free of charge. The recall began February 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-869.
20V660000 · Suspension:rear:axle:spindle
Oct 27, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2020-2021 Freightliner Cascadia, 2021 Freightliner 108SD, 114SD and Business Class M2 and Western Star 4700, 4900 and 5700 vehicles. The steer axle spindle nut snap-ring locking feature may be incorrectly installed or missing from the left spindle nut at the spindle.
Consequence & remedy
Consequence: A missing or improperly installed locking snap ring can result in wheel-end failure and potentially a wheel-off/separation condition, increasing the risk of crash.
Remedy: DTNA will notify owners, and dealers will inspect the hub cap plug, and reinstall or replace of the snap-ring as needed, free of charge. The recall began December 18, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-866.
20V390000 · Service Brakes, Air:supply:quick Release Valve
Jul 2, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Freightliner Cascadia tractor trailers. The single brake modulator valve may be affected by chemical corrosion which can slow down the release timing and cause the brakes to pull to the affected side during automatic braking events.
Consequence & remedy
Consequence: Brakes that pull to one side during automatic braking events may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the front left and right single brake modulator valves will be replaced and spacers added, free of charge. The recall began August 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-855.
20V214000 · Exterior Lighting
Apr 14, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4EA25006 · Automatic Emergency Braking Errors
Opened Oct 23, 2025 · No close date supplied
Status: open (inferred from source dates) · Forward Collision Avoidance: Dynamic Brake Support/brake Assist
On May 26, 2023, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23010) to assess reports of false positive activation of the Automatic Emergency Braking (AEB) system in model year (MY) 2017-2022 Daimler Trucks North America (DTNA) vehicles. The reports alleged that activation of the AEB system occurred while driving with no apparent obstruction in the vehicle's forward path, resulting in sudden vehicle deceleration. DTNA indicated that it received of a total of 315 reports that may relate to the alleged defect in MY 2017-2022 DTNA vehicles. DTNA stated that the vast majority of false positive activation of the subject systems occur in very limited durations and result in a five mile per hour deceleration. ODI considered four AEB systems offered by DTNA: Detroit Assurance 2.0, Detroit Assurance 4.0, Detroit Assurance 5.0, and Wabco OnGuard. ODI’s analysis shows that of the Detroit Assurance versions, all are failing at similar rates. The OnGuard AEB systems equipped on the same model and model year vehicles have experienced a significantly lower claim rate. To date, ODI has received a total of 32 consumer complaints of inadvertent activation of AEB in MY 2017-2022 DTNA vehicles. In total, ODI reviewed 347 unique (i.e., non-duplicative Vehicle Identification Numbers) reports that may relate to the alleged defect, which include 24 reports involving a crash, 13 reports involving an alleged injury and one report with a fatality. PE23010 has been upgraded to an Engineering Analysis to further assess the scope, frequency, and potential safety related consequences of the inadvertent AEB activations in MY 2017-2022 DTNA vehicles. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
PE23010 · Automatic Emergency Braking Errors
Opened May 26, 2023 · Closed Oct 23, 2025
Status: closed (inferred from source dates) · Forward Collision Avoidance: Dynamic Brake Support/brake Assist
On May 26, 2023, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23010) to assess reports of false positive activation of the Automatic Emergency Braking (AEB) system in model year (MY) 2017-2022 Daimler Trucks North America (DTNA) vehicles. The reports alleged that activation of the AEB system occurred while driving with no apparent obstruction in the vehicle's forward path, resulting in unexpected and sudden vehicle deceleration. ODI sent an information request letter to DTNA on June 15, 2023.In its September 1, 2023, response, DTNA indicated that it received of a total of 315 reports that may relate to the alleged defect in MY 2017-2022 DTNA vehicles. DTNA stated that the vast majority of false positive activation of the subject systems occur for very limited durations and result in a five mile per hour deceleration. ODI considered four AEB systems offered by DTNA: Detroit Assurance 2.0, Detroit Assurance 4.0, Detroit Assurance 5.0, and Wabco OnGuard. ODI’s analysis shows that of the Detroit Assurance versions, all fail at similar rates. The Wabco OnGuard AEB systems equipped on the same model and model year vehicles have experienced a significantly lower claim rate. To date, ODI has received a total of 32 consumer complaints of inadvertent activation of AEB in MY 2017-2022 DTNA vehicles. In total, ODI reviewed 347 unique (i.e., non-duplicative Vehicle Identification Number) reports that may relate to the alleged defect, which include 24 involving a crash, 13 reports involving an alleged injury and one report with a fatality. PE23010 has been upgraded to an Engineering Analysis (EA25006) to further assess the scope, frequency, and nature of the inadvertent AEB activations in MY 2017-2022 Freightliner Cascadia and Western Star 5700 vehicles.In particular, this EA will assess the safety consequences likely to arise in the scenarios during which the AEB inadvertently and unexpectedly activates, such as the speeds and conditions during which the activation occurs. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
PE21004 · Engine Electrical Wiring Harness Chafe
Opened Feb 25, 2021 · Closed Jan 14, 2025
Status: closed (inferred from source dates) · Electrical System; Electrical System: Instrument Cluster/panel; Electrical System:wiring; Electrical System:wiring:front Underhood; Engine; Engine And Engine Cooling; Engine And Engine Cooling:engine; Engine And Engine Cooling:engine:diesel; Engine And Engine Cooling:engine:engine Control Module (ecu/ecm)
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Additional source detail variants (9)
Electrical System
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Electrical System: Instrument Cluster/panel
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Electrical System:wiring
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Electrical System:wiring:front Underhood
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling:engine
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling:engine:diesel
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling:engine:engine Control Module (ecu/ecm)
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
RQ20001 · Sam Cab Water Intrusion
Opened Aug 31, 2020 · Closed Jun 26, 2025
Status: closed (inferred from source dates) · Electrical System; Electrical System:wiring:fuses And Circuit Breakers
On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Electrical System
On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Electrical System:wiring:fuses And Circuit Breakers
On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.