NHTSA owner reports · September 18, 2026 snapshot.
Service Brakes complaints
30 reportsClear category filterMileage unknown · Mar 31, 2023
Forward Collision AvoidanceService BrakesVehicle Speed Control
All of the advanced safety features have stopped working in my Mach E The curse control does not work either the adaptive or the standard. The pre-collision system is not working, lane assit is not working. The absence of these working systems is a danger. Ford knows about this software problem with the software, however they r…
Read full complaint
All of the advanced safety features have stopped working in my Mach E The curse control does not work either the adaptive or the standard. The pre-collision system is not working, lane assit is not working. The absence of these working systems is a danger. Ford knows about this software problem with the software, however they refuse to fix the problem at there expense. The Mach E was designed from the ground up as software driven, the manufacture should be responsible to ensure that the software is up to date.
NHTSA ODI #11514740
Mileage unknown · Jan 23, 2023
Service Brakes
Stuck Disk Brake: The left rear disc brake was stuck. After releasing the parking brake the car would not move. After two attempts to reverse the brake released. There is a loud thumping sound from the rear wheel. While braking there is a violent vibration coming from the left rear wheel. The car is parked now and will be t…
Read full complaint
Stuck Disk Brake: The left rear disc brake was stuck. After releasing the parking brake the car would not move. After two attempts to reverse the brake released. There is a loud thumping sound from the rear wheel. While braking there is a violent vibration coming from the left rear wheel. The car is parked now and will be towed to a Ford Dealer. In the on-line Ford Mach-E forum there are other complaints about brakes being stuck with similar description as above. My car was last driven in wet weather and then parked in a garage. Temperatures at the time were cold but not freezing. The temperature at the time of incident was about 50 degrees Fahrenheit. This seems to be a safety issue.
NHTSA ODI #11503146
21,000 miles · Nov 15, 2022
Power TrainService Brakes
The contact owns a 2021 Ford Mustang Mach-E. The contact stated while in reverse(R) and driving approximately 3 MPH, the vehicle would independently brake suddenly. The contact stated that the parking brake light was illuminated. The contact stated that the brake failure was intermittent and occurred without warning. Additionall…
Read full complaint
The contact owns a 2021 Ford Mustang Mach-E. The contact stated while in reverse(R) and driving approximately 3 MPH, the vehicle would independently brake suddenly. The contact stated that the parking brake light was illuminated. The contact stated that the brake failure was intermittent and occurred without warning. Additionally, the contact stated that the vehicle would lunge forward while stopped at a traffic signal without depressing the accelerator. The vehicle was not taken to the local dealer; however, the local dealer was contacted, and the contact was asked if she had duplicated the failure. The contact stated that she could not since the failure was intermittent. The vehicle had not been repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 21,000.
NHTSA ODI #11493699
Mileage unknown · Nov 10, 2022
Electrical SystemService BrakesVehicle Speed Control
* On October 16th, 2022, at about 7:00 pm, I was driving my 2021 Ford Mach-E GT when we began to change lanes (we were in the left lane heading East) as the vehicle in front of us slowed down to make a left-hand turn. There was a car behind us and two vehicles in the right lane (two-lane road in each direction) that were a few c…
Read full complaint
* On October 16th, 2022, at about 7:00 pm, I was driving my 2021 Ford Mach-E GT when we began to change lanes (we were in the left lane heading East) as the vehicle in front of us slowed down to make a left-hand turn. There was a car behind us and two vehicles in the right lane (two-lane road in each direction) that were a few car lengths behind us as we began to change into that lane. When I turned on my signal and turned the steering wheel, I pressed the gas pedal to accelerate to get around the car in front of me to keep my distance from the vehicles in the lane I was transitioning into. Unfortunately, when I pressed the gas pedal, we experienced complete vehicle failure. I had no steering, brakes, or acceleration. Within a short time (30-45 minutes), we had no power as the lights on the vehicle, and all electrically powered devices and components were entirely out. This made it very difficult to tow the car as it is all-wheel drive, and we could not put it in Neutral to pull the vehicle. As this happened, five cars were in the area, and several had to swerve and fly off the road onto the dirt shoulder. We barely missed the car in front of us, and the car behind us had to lock up its breaks not to hit us. Our car gradually slowed down and cost off the road about 50 yards or so after losing power, as it was very difficult to get the vehicle to steer; it took everything I had to turn the wheel to get it off the road. We put on the emergency blinkers, but the vehicle lights flashed erratically inside and outside the car. We had over a dozen warnings flash on our dashboard about vehicle failure. The speakers in the car were making a thumping sound on their own as the car was flashing headlights, brake lights, and flashers on their own and very sporadically. It was like a disco club in the car as all the lights were flashing on and of at a rapid rate. The other cars stoppe and were very angry at us as the screamed at us that we almost caused an accident.
NHTSA ODI #11493140
Mileage unknown · Oct 24, 2022
Forward Collision AvoidanceService BrakesVehicle Speed Control
I keep receiving a fault for the front camera which seems to be a very common occurrence amongst Mach-e owners lately. After receiving this message, the cruise control abruptly kicks off. All functions of the cruise control do not work in this instance…adaptive, speed keeping, lane control, etc. This fault happens about once eve…
Read full complaint
I keep receiving a fault for the front camera which seems to be a very common occurrence amongst Mach-e owners lately. After receiving this message, the cruise control abruptly kicks off. All functions of the cruise control do not work in this instance…adaptive, speed keeping, lane control, etc. This fault happens about once every couple of minutes while driving. When I’m using cruise control in ‘one-pedal’ drive mode and this fault occurs, the vehicle immediately starts braking. This happened one time as I was entering a narrow bridge in Solomons, MD, and a car behind me nearly rear ended me.
NHTSA ODI #11490513
Mileage unknown · Sep 25, 2022
Service Brakes
The rear brake pads have grinned into the rotors causing a rusted ring around the rear rotors. During braking, harsh metal-on-metal noise can be heard in low speed braking applications. Performance-wise, noticeably longer braking distances in low speed braking applications were observed. I Have been to the dealership multiple …
Read full complaint
The rear brake pads have grinned into the rotors causing a rusted ring around the rear rotors. During braking, harsh metal-on-metal noise can be heard in low speed braking applications. Performance-wise, noticeably longer braking distances in low speed braking applications were observed. I Have been to the dealership multiple times however, I was told this was ‘normal’ by chief service managers. Loud braking noise and weakened braking performance should not be observed after fewer than 11k miles and less than a year of ownership.
NHTSA ODI #11486251
Mileage unknown · Jul 22, 2022
Electrical SystemFuel/propulsion SystemService Brakes
The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Any internal damage to contactors is not externally visibley, and warning notices on displa…
Read full complaint
The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Any internal damage to contactors is not externally visibley, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, power brakes and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships NEED equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components. My complaint is that Ford's recall notice 22s41 is a software-only band aid and does not require removal of the parts KNOWN TO FAIL. These parts should be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle. I suffered a failure related to this post-recall and had a sudden and permanent loss of power while driving at Texas highway speeds (70mph) in congested morning traffic. Fortunately I was able to make my way off the highway but other conditions could have ended up worse. Software "fixes" are not the solution and the actual problem of the defective parts need to be replaced in the affected models to avoid possible injuries and fatalities from these vehicles.
NHTSA ODI #11475350
Mileage unknown · Apr 25, 2022
Electrical SystemService BrakesVehicle Speed Control
While driving around a curve, my car lost all power and went completely dark. I didn't have brakes, steering, lights or any other functions. My car was completely bricked. This happened before daylight and I didn't have emergency flashers to notify other drivers I was stopped on the side of the road. After waiting for 6 hours f…
Read full complaint
While driving around a curve, my car lost all power and went completely dark. I didn't have brakes, steering, lights or any other functions. My car was completely bricked. This happened before daylight and I didn't have emergency flashers to notify other drivers I was stopped on the side of the road. After waiting for 6 hours for a tow truck, I went and tried to find the problem myself. I found a loose connection. It was the main power feed supplying the fuse box. Once I tightened it up, I was able to start and drive the car. I've attached a picture of the connection I tightened.
NHTSA ODI #11462003
Mileage unknown · Feb 28, 2022
Electrical SystemFuel/propulsion SystemService Brakes
As the vehicle was braking to a stop at a stoplight the rear motors began chattering. The vehicle stopped and gave multiple error messages including "Shift System Fault" and "Stop Vehicle Safely." It locked the parking brake and could not be moved. It was stuck in the middle of a busy intersection on a county highway. It could n…
Read full complaint
As the vehicle was braking to a stop at a stoplight the rear motors began chattering. The vehicle stopped and gave multiple error messages including "Shift System Fault" and "Stop Vehicle Safely." It locked the parking brake and could not be moved. It was stuck in the middle of a busy intersection on a county highway. It could not be driven or pushed out of traffic until the error cleared. It was a hazard to the occupants and other drivers on the road. 911 was called to get support with traffic. There was no indication before this failure occurred. It will be going in for service in 2 days. This is the second occurrence of the failure on this vehicle, the previous one at 2011 miles.
NHTSA ODI #11454597
Mileage unknown · Jun 18, 2021
EngineService Brakes
While driving on a mountain pass, my 2021 Mustang Mach-E vehicle lost all regenerative braking which, due to the downhill grade, caused a sudden and shocking increase in speed, played warning chimes, and displayed "Stop Safely Now" and "1-Pedal Drive Fault Press Brake Pedal To Reduce Speed" and lost all drive power, forcing me t…
Read full complaint
While driving on a mountain pass, my 2021 Mustang Mach-E vehicle lost all regenerative braking which, due to the downhill grade, caused a sudden and shocking increase in speed, played warning chimes, and displayed "Stop Safely Now" and "1-Pedal Drive Fault Press Brake Pedal To Reduce Speed" and lost all drive power, forcing me to coast to a stop on the side of the mountain, in an area without cellular coverage to call for help. The vehicle did not restart and would not shift out of Park in 5 attempts to restart. After 10 minutes on the side of the road, the vehicle restarted without issue and no error messages remain in the vehicle.
NHTSA ODI #11421384
Official recalls
13Jun 30, 2026
Ford Motor Company (Ford) is recalling certain 2021-2023 Mustang Mach E vehicles. The rear differential pinion shaft may fracture.
Consequence & remedy
Consequence: Differential pinion shaft fracture may result in a loss of drive power, or unintended vehicle movement if the vehicle is in park without the parking brake applied, increasing the risk of a crash.
Remedy: Dealers will repair or replace the rear differential assembly as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed July 13, 2026. Additional letters will be sent once the remedy is available, anticipated in late December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S50.
Aug 8, 2025
Ford Motor Company (Ford) is recalling certain 2021 Mach-E vehicles that were repaired incorrectly under recall 24V777. An Over-The-Air (OTA) update to the Anti-lock Braking System (ABS) may result in a loss of power brake assist, ABS, Electronic Stability Control, Traction Control, and driver assistance features.
Consequence & remedy
Consequence: A loss of power brake assist can increase the distance required to stop the vehicle. Additionally, a disabled antilock brake system and/or stability control system can result in a loss of vehicle control. Either of these scenarios can increase the risk of a crash.
Remedy: Dealers will update the ABS calibration software, free of charge. Owner notification letters were mailed September 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S81.
Jun 13, 2025
Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.
Consequence & remedy
Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.
Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.
Additional source detail variants (2)
Electrical System:body Control Module:software
Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.
Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.
Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.
Latches/locks/linkages:doors:latch
Ford Motor Company (Ford) is recalling certain 2021-2025 Mustang Mach E vehicles. In the event of a low battery charge, the electronic door latches may remain locked once the driver or front passenger exits and shuts the door, possibly trapping someone who is unable to use the inside door release handles, such as a child in the back seat.
Consequence: The inability to enter or exit the vehicle in an emergency increases the risk of injury.
Remedy: Dealers will update the Powertrain Control Module (PCM) and the Secondary On-Board Diagnostic Control Module C (SOBDMC) software, free of charge. Owner notification letters were mailed to 2021-2025 Mustang Mach-E owners September 12, 2025. Additionally, Owner notification letters were mailed to 2024-2025 Mustang Mach-E owners July 10, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S65.
May 9, 2025
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence & remedy
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Feb 28, 2025
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles previously repaired incorrectly under recall number 22V-412. The high voltage battery main contactors may overheat.
Consequence & remedy
Consequence: An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.
Remedy: Dealers will update the on-board software, free of charge. Owner notification letters were mailed April 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S14.
Oct 18, 2024
Ford Motor Company (Ford) is recalling certain 2021 Mach-E vehicles. An Over-The-Air (OTA) update to the Anti-lock Braking System (ABS) may result in a loss of power brake assist, ABS, Electronic Stability Control, Traction Control, and driver assistance features.
Consequence & remedy
Consequence: A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, a disabled antilock brake system and/or stability control system can result in a loss of vehicle control. Either of these scenarios can increase the risk of a crash.
Remedy: Dealers will update the ABS calibration, free of charge. Owner notification letters were mailed November 5, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S65.
Oct 13, 2023
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles equipped with an extended range battery. The high voltage battery main contactors may overheat.
Consequence & remedy
Consequence: An overheated high voltage battery contactor can result in a loss of drive power, increasing the risk of a crash.
Remedy: Dealers will replace the high voltage battery junction box, free of charge. Owner notification letters were mailed December 29, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S56. Vehicles included in this recall that were previously repaired under recall 22V-412 will need to have the new remedy completed.
Jun 10, 2022
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles. The high voltage battery main contactors may overheat.
Consequence & remedy
Consequence: An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.
Remedy: Dealers will update the on-board software, free of charge. Owner notification letters were mailed on July 8, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S41.
May 13, 2022
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.
Consequence & remedy
Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.
Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.
Additional source detail variants (2)
Power Train:automatic Transmission:control Module:software
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.
Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.
Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.
Vehicle Speed Control
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles equipped with all-wheel drive. The powertrain control module (PCM) functional safety software may fail to detect a software error, resulting in unintended acceleration, unintended deceleration, or a loss of drive power.
Consequence: Unintended acceleration, unintended deceleration, or a loss of drive power increases the risk of a crash.
Remedy: The PCM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed June 9, 2022. Owners may contact Ford customer service at 1-800-436-7332. Ford's number for this recall is 22S29.
Dec 16, 2021
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E and 2022 Maverick vehicles. The rear seat belt buckles may not be properly attached to the rear floor assembly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 210, "Seat Belt Assembly Anchorages."
Consequence & remedy
Consequence: Improperly attached seat belts may not adequately restrain an occupant in a crash, increasing the risk of injury.
Remedy: Dealers will repair the rear seat belt buckle attachments, free of charge. Owner notification letters were mailed January 28, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C36.
Sep 14, 2021
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence & remedy
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.
Additional source detail variants (2)
Visibility:windshield:critical Fasteners
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.
Visibility:windshield
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C22.
Sep 14, 2021
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The vehicle's panoramic roof glass panel may not have been properly bonded to the vehicle, which could allow it to detach.
Consequence & remedy
Consequence: A roof panel that separates from a vehicle can become a road hazard, increasing the risk of a crash or injury.
Remedy: Dealers will apply additional urethane adhesive, free of charge. Owner notification letters were mailed October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S42.
Mar 5, 2021
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.
Consequence & remedy
Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.
Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.
Additional source detail variants (2)
Structure:frame And Members
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.
Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.
Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.
Suspension:subframe/mounting Bracket
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The front subframe bolts may not have been tightened properly during assembly, which could result in loose bolts.
Consequence: Loose subframe bolts may reduce the vehicle's performance in a crash, increasing the risk of injury.
Remedy: Ford will notify owners, and dealers will inspect the front subframe bolts and tighten them as necessary, free of charge. The recall began April 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S09.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4EA25001 · Collisions Involving Ford Bluecruise
Opened Jan 17, 2025 · No close date supplied
Status: open (inferred from source dates) · Electrical System:adas
On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Engineering Analysis (EA) is being opened to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.
PE24012 · Collisions Involving Ford Bluecruise
Opened Apr 25, 2024 · Closed Jan 17, 2025
Status: closed (inferred from source dates) · Electrical System:adas
On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Preliminary Evaluation is being upgraded to an Engineering Analysis (EA25001) to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.
RQ23004 · High Voltage Battery Contactor Failure
Opened Aug 17, 2023 · Closed Dec 6, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software; Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software
On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Electrical System:propulsion System:traction Battery:management System/energy Control Module (bms/becm):software
On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software
On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Illustration