2017 Ford Fusion

When shifting from reverse to drive, my car would not shift and instead forced my shifting knob into the park position. The issue was the exact same as the ford 22S43 recall, where the shifting bushing wears out, however the 2017 Fusion is not included in that recall, despite still having the same bushing. I was forced into park and upon inspection, saw that the shifting solenoid was detached from the transmission. If this happened on a busy street, I would have had a car dead in the middle of the road, possibly causing an accident. Luckily I was not. I bought the new bushing, DG9Z-7K340-A, online and fixed it myself, not knowing about the cap that goes with it, so I will not be able to reproduce the issue. I believe I still have the defective bushing and could show it to someone if needed, but no one has looked at it. My car gave a specific warning (can't recall the details) that, when googled, lead me to videos of the exact issue. I believe it happened once before, but somehow after shifting it in park and back into drive, it went away. that was about a week before the full failure. My main concern is that the 22S43 recall does not include enough vehicles for that issue.

Trunk keeps popping open on its own while driving. Has happened at ranging speeds between 5 and 60 mph, different hours throughout the day, Temps between 27 and 70 degrees F. The Key fob is in clear site, on its own no one holding or any chance of button being pressed. Has also happened while in park, car not running. Came outside and it's open, also no chance of key fob being pressed. Happens multiple times per day. Removed all objects from truck, nothing on inside pressing or near safety release or blocking latch. Duplicated with different drivers and passengers present.

I took my car to the Ford dealer today for a oil change and was told that the lug nuts were defective and had to be replaced. They charged me $237.40 to replaced them. I have a extended warranty and they told me they were not cover under this warranty. Checking on line I find there is a large number of vehicle that have the same problem with the same lug nuts. Why is not a recall on these lug nuts.

I have a 2.0L engine with a 6-speed engine. My daughter was on the highway going about 60mph and her car started shaking very badly and eventually shut off. It turns out that it does in fact have something to do with her studs not being welded correctly, and her transmission mounts failed causing the engine and transmission to move rapidly under the hood of her car not being held in place.

Stopped vehicle at a drive though and put in in park. Afterword would not shift into drive, only in reverse. Had to back all the way through a parking lot to find a safe place to try to park as not to be in the way of other vehicles. Fortunately, at the time no one was parked behind me. after turning off the car, it would not start again and had to have the vehicle towed to a dealership for repair. There is a recall on many Ford vehicles for this exact same issue due to a shift cable bushing, but for some reason not on this particular vehicle. No warning lights appeared before the issue, only after I killed the car and tried to restart it.

While driving the vehicle the vehicle stalls or stops when attempting to shift to either reverse or drive. An alert comes on indicating shifter issues then vehicle was inoperable. Had to call for a wrecker to have it towed due to the issue. Left us stranded in a parking lot away from home. Local certified mechanic advised it was bushings, shifter cable to the transmission that went bad on the vehicle. He said there was a recent recall from Ford, so I contacted Ford by phone. I was told that my vehicle even though it is the exact same recall from Ford issue with my car, my VIN number was not included into the recall by Ford. I'm having to repair my car on my own at my cost.

The shift bushing that attaches the shifter cable to the transmission has degraded then subsequently detached in the past in 2021. In 2022 after the shift bushing was replaced, it has now degraded again (without detaching yet) causing the vehicle to be stuck in reverse or drive after shifting vehicle. This has caused me on multiple occasions to place the vehicle in reverse to backup into the roadway and become stuck without the ability to shift the vehicle out of reverse. The only way to correct it was to turn off the vehicle to force it into park then start the car to place it into drive. This same thing occurred in the previous time before it detached. Being stuck in the roadway without the ability to shift is very dangerous. This is all due to having a 3 dollar shift bushing degrade over time. I hope FORD takes this seriously and replaces this shift bushing with a safer alternative.

When putting into reverse it jolts and shakes and makes a real loud noise and says vehicle and low gear and needs to be stopped (not sure of the exact wording} then when put into drive it does the same thing but not as rough as I try to continue to drive forward there is no power I barely step on the gas and it sounds real rough and loud it seems like it's hot under the hood more than usual I had to diagnose test run it's saying it's the power train system it's eating through all my gas the electrical has been acting weird the last few months but there was no warning signs popping up on my dash until out of nowhere my check light engine came on I called the dealership here in Ogden Utah they stated that my vehicle is outside of the recall time frame but it seems like everyone with a 2017 well actually from the last 10 years there's been issues it seems and it's all the same problem mostly I really don't think I should have to come out of pocket since this is an ongoing issue with Ford and their fusions