NHTSA owner reports · September 18, 2026 snapshot.
Power Train complaints
452 reportsClear category filter1,500 miles · Jul 12, 2019
Power Train
THIS 2017 FOCUS WAS BROUGHT BRAND NEW. WHEN IT HIT ABOUT 1500 MILES, IT BEGAN TO SHUTTER AND SHAKE UNDER THE HOOD UPON ACCELERATION. THIS HAPPENED AT STOP SIGNS OR ON THE HIGHWAY. THIS HAPPENS WITH ANY SORT OF ACCELERATION. IT HAPPENS WHEN THE CAR IS STRAIGHT, LIKE ACCELERATING FROM A "STOPPED" POSITION AT A STOP SIGN WHEN IT IS…
Read full complaint
THIS 2017 FOCUS WAS BROUGHT BRAND NEW. WHEN IT HIT ABOUT 1500 MILES, IT BEGAN TO SHUTTER AND SHAKE UNDER THE HOOD UPON ACCELERATION. THIS HAPPENED AT STOP SIGNS OR ON THE HIGHWAY. THIS HAPPENS WITH ANY SORT OF ACCELERATION. IT HAPPENS WHEN THE CAR IS STRAIGHT, LIKE ACCELERATING FROM A "STOPPED" POSITION AT A STOP SIGN WHEN IT IS MY TURN TO GO. IT ALSO HAS HAPPENED WHEN I WAS ATTEMPTING TO PASS ANOTHER VEHICLE. I CALLED THE DEALERSHIP AND WAS TOLD THIS WAS "NORMAL" WITH THESE CARS. I TOOK IT IN AND WAS TOLD IF THEY CHECKED IT OUT & IT WAS DETERMINED THIS WAS A "NORMAL" SHUTTER WITH THESE CARS, I WOULD HAVE TO PAY FOR THEIR TIME. NOT ABLE TO AFFORD THAT, I DID NOT HAVE THEM CHECK IT OUT. AT ABOUT 2500 MILES, I WAS PASSING A VEHICLE AND WHILE IN THE OPPOSITE LANE, THE CAR BEGAN TO SHUTTER & STALL. ME & CHILD WERE NEARLY HIT HEAD ON. I TOOK IT BACK TO THE DEALERSHIP. THIS TIME THEY KEPT IT TO CHECK IT OUT. THEY KEPT IT A WEEK. IT WAS DETERMINED THAT IT WAS INDEED THIS PARTICULAR TRANSMISSION AND CURRENTLY, FORD HAD NO RECALLS AND THEREFORE THEY COULD NOT DO ANYTHING. THE DEALERSHIP DONE WHAT THEY COULD DO AS FAR AS WHAT MY FORD WARRANTY WOULD PAY FOR. BASICALLY, I'M STUCK PAYING FOR A CAR THAT, AT TIMES, IS UNSAFE. I CAN'T PULL OUT ON THE ROAD OR PASS A VEHICLE BECAUSE I DO NOT KNOW IF THIS WILL BE TIME THE THAT MY CAR SHUTTERS AND WE ARE HIT HEAD ON. ACCORDING TO THE DEALERSHIP, FORD IS AWARE OF THIS TRANSMISSION ISSUE AND HAS CONTINUED TO SELL THEM IN THESE CARS. THIS CAR IS DANGEROUS AND I AM CANNOT AFFORD TO TURN IT IN NOR CAN I AFFORD TO REPLACE IT.
NHTSA ODI #11231321
9,000 miles · Jul 11, 2019
Power Train
PURCHASED NEW AT 9000 MILES TRANSMISSION STARTED TO SHUDDER AND SLIP ON ACCELERATION, HAD CLUTCH REPLACED AT 11K MILES, AT 22K MILES IT OCCURED AGAIN THIS TIME JERKING INTO GEAR WHILE ACCELERATING, REPLACED CLUTCH AGAIN 24K MILES AT 37K MILES HAD IT REPLACED AGAIN FOR THE SAME REASON. 3 CLUTCH REPLACEMENTS IN UNDER 40K MILES AND…
Read full complaint
PURCHASED NEW AT 9000 MILES TRANSMISSION STARTED TO SHUDDER AND SLIP ON ACCELERATION, HAD CLUTCH REPLACED AT 11K MILES, AT 22K MILES IT OCCURED AGAIN THIS TIME JERKING INTO GEAR WHILE ACCELERATING, REPLACED CLUTCH AGAIN 24K MILES AT 37K MILES HAD IT REPLACED AGAIN FOR THE SAME REASON. 3 CLUTCH REPLACEMENTS IN UNDER 40K MILES AND IT IS HAPPENING AGAIN. THIS IS UNSAFE IN HEAVY TRAFFIC AND HIGHWAYS TRANSMISSION FAILURE IS DANGEROUS. TRANSMISSION JERKING, SHUDDERING TAKES LONGER TO GET UP TO SPEED AND MAINTAIN SPEED IN TRAFFIC. ALSO SHUDDERS AND SLIPS WHEN STARTING OFF FROM A STOPLIGHT.
NHTSA ODI #11231162
8,000 miles · Jul 11, 2019
Power Train
ABOUT A COUPLE OF MONTHS AFTER PURCHASE I STARTED NOTICING A "SHUDDER" IN THE TRANSMISSION. WHEN I WOULD TRY AND TAKE OFF FROM A STOP IT WOULD SHUDDER AND FEEL AS THOUGH MY TIRES WERE SKIPPING ACROSS THE PAVEMENT PRETTY BAD. EVENTUALLY IT WAS SO BAD THAT I WOULD NOT TURN IN FRONT OF AN ONCOMING CAR THAT WAS EVEN A HALF MILE AWAY…
Read full complaint
ABOUT A COUPLE OF MONTHS AFTER PURCHASE I STARTED NOTICING A "SHUDDER" IN THE TRANSMISSION. WHEN I WOULD TRY AND TAKE OFF FROM A STOP IT WOULD SHUDDER AND FEEL AS THOUGH MY TIRES WERE SKIPPING ACROSS THE PAVEMENT PRETTY BAD. EVENTUALLY IT WAS SO BAD THAT I WOULD NOT TURN IN FRONT OF AN ONCOMING CAR THAT WAS EVEN A HALF MILE AWAY OUT OF FEAR IT WOULD STALL OR SIMPLY NOT MOVE. I ENDED UP TAKING MY CAR IN FOR REPAIR AFTER SEEING NUMEROUS COMPLAINTS OF THE SAME ISSUE AND DECIDING IT WAN'T ALL IN MY HEAD. I WAS CHARGED $130 FOR THEM TO TELL ME THEY CLEANED THE CLUTCH AND IT WAS "NORMAL" FOR THIS TYPE OF CAR AND THAT I NEED TO DRIVE IT HARDER DUE TO THE TRANSMISSION IT HAS IN IT. IT DOES NOT MATTER HOW HARD I DRIVE MY CAR IT IS STILL THERE. CLEANING OF THE CLUTCH OR WHATEVER THEY DID TO IT, WORKED FOR ABOUT A WEEK. HERE I AM BACK TO HAVING THE SAME ISSUE AND IT IS GRADUALLY GETTING WORSE. I AM SEEING ALL TYPES OF COMPLAINTS FOR THIS SAME ISSUE AND FEEL THIS IS NOT NORMAL. A BRAND NEW CAR SHOULD NOT FEEL LIKE CRAP TO DRIVE. BUYER BEWARE!
NHTSA ODI #11230953
8,500 miles · Jul 10, 2019
Electrical SystemFuel/propulsion SystemPower Train
MY CAR WAS AT A STANDSTILL AND MY CAR STUTTERED LIKE THE TRANSMISSION WAS GOING TO FALL OUT, I TALK WITH KEVIN AT LIBERTY FORD IN AURORA OHIO AND HE SAID DIDN'T THE SALESMAN TELL YOU ABOUT THE TRANSMISSION PROBLEMS AND I SAID NO. MY RADIO HAS STOPPED WORKING TWICE, I DIDN'T HAVE THIS PROBLEM UNTIL LIBERTY FORD DID MY OIL CHANGE …
Read full complaint
MY CAR WAS AT A STANDSTILL AND MY CAR STUTTERED LIKE THE TRANSMISSION WAS GOING TO FALL OUT, I TALK WITH KEVIN AT LIBERTY FORD IN AURORA OHIO AND HE SAID DIDN'T THE SALESMAN TELL YOU ABOUT THE TRANSMISSION PROBLEMS AND I SAID NO. MY RADIO HAS STOPPED WORKING TWICE, I DIDN'T HAVE THIS PROBLEM UNTIL LIBERTY FORD DID MY OIL CHANGE BACK IN MAY 2019, ALSO MY CAR IS MISSING WHILE DRIVING. NOT HAPPY WITH BEING SOLD A LEMON. *TR CONSUMER NO LONGER HAS THE VEHICLE.*JB
NHTSA ODI #11230620
17,000 miles · Jul 10, 2019
Power Train
UPON COMING TO A STOP (SUCH AS AT A TRAFFIC LIGHT OR STOP SIGN,) THE VEHICLE MAKES EXTREMELY LOUD "CLUNKING" NOISES WHEN SHIFTING DOWN IN GEAR. THE SOUND SEEMS TO COME DIRECTLY FROM THE TRANSMISSION AREA AND IS IN SYNC WITH THE CHANGING OF GEARS. UPON ACCELERATION FROM A STOP, THE TRANSMISSION WILL MAKE GRINDING SOUNDS AND STUTT…
Read full complaint
UPON COMING TO A STOP (SUCH AS AT A TRAFFIC LIGHT OR STOP SIGN,) THE VEHICLE MAKES EXTREMELY LOUD "CLUNKING" NOISES WHEN SHIFTING DOWN IN GEAR. THE SOUND SEEMS TO COME DIRECTLY FROM THE TRANSMISSION AREA AND IS IN SYNC WITH THE CHANGING OF GEARS. UPON ACCELERATION FROM A STOP, THE TRANSMISSION WILL MAKE GRINDING SOUNDS AND STUTTER THE ENTIRE CAR IN A JERKING-TYPE MOTION. WHEN THIS HAPPENS, THE ENTIRE CAR FEELS AS IF THERE IS A LOSS OF POWER AND MAKES IT HARD TO ACCELERATE PROPERLY IN HIGH-SPEED/HIGH-TRAFFIC AREAS (SUCH AS FREEWAY ON-RAMPS OR STATE HIGHWAYS.) I PERSONALLY BELIEVE THAT THIS COULD BE A DANGEROUS THING BECAUSE IF I WERE TO PASS SOMEONE ON A DOTTED LINE, OR EVEN PULL OUT ONTO A ROADWAY, THE CAR MAY EITHER STALL OR STUTTER SO SLOWLY THAT I WOULDN'T BE ABLE TO GET UP TO SPEED CORRECTLY, RESULTING IN A POSSIBLE COLLISION. LASTLY, I WOULD LIKE TO MENTION THAT ON 3 SEPARATE OCCASIONS NOW, WHEN I AM TRYING TO PARK THE CAR IN A PARKING SPACE, THE TRANSMISSION WOULD NOT SWITCH IT INTO REVERSE AT ALL. MY GEAR SHIFTING STICK WAS IN REVERSE, AS WELL AS THE GAUGE-CLUSTER DISPLAYING I WAS IN REVERSE, HOWEVER, MY CAR ACTED AS IF IT WAS IN NEUTRAL. I WOULD HAVE TO PLACE THE CAR BACK INTO PARK OR DRIVE AGAIN, AND THEN TRY AGAIN FOR THE TRANSMISSION TO SUCCESSFULLY SWITCH INTO REVERSE. I DID CONTACT MY LOCAL FORD DEALERSHIP, HOWEVER THEY SAID THEY WERE MANY WEEKS OUT AND I NEVER COULD GET AHOLD OF ANYONE THERE TO SCHEDULE A TIME TO LOOK AT IT. I WILL ADD ON THAT MY CAR ONLY HAS 17,000 MILES ON IT AS OF JULY 2019. FROM MY RESEARCH, I HAVE SEEN MANY OTHERS POST COMPLAINTS OR WORRIES IN REGARD TO THE 2017 FORD FOCUS AND ITS TRANSMISSION. I HOPE THAT NHTSA WILL LOOK INTO THIS FURTHER AND CAN FIND ANSWERS AS TO WHY MANY, MANY OF THESE CARS ARE HAVING ISSUES WITH STALLING, STUTTERING, AND GRINDING NOISES AND MOTIONS COMING FROM THE TRANSMISSION.
NHTSA ODI #11230618
30,000 miles · Jul 9, 2019
Power Train
MY 2017 FOCUS DEVELOPED A PROBLEM WITH THE POWER SHIFT DUAL CLUTCH TRANSMISSION SLIPPING AT LOW SPEEDS. IT WOULD LAUNCH WELL INITIALLY, BUT THEN START TO SHUDDER AND SLIP UNTIL 2ND GEAR WAS FULLY ENGAGED. THE PROBLEM WAS MORE PRONOUNCED WHEN TURNING ONTO A ROAD WHILE ACCELERATING TO MERGE WITH TRAFFIC, AND THE SHUDDERING WAS STR…
Read full complaint
MY 2017 FOCUS DEVELOPED A PROBLEM WITH THE POWER SHIFT DUAL CLUTCH TRANSMISSION SLIPPING AT LOW SPEEDS. IT WOULD LAUNCH WELL INITIALLY, BUT THEN START TO SHUDDER AND SLIP UNTIL 2ND GEAR WAS FULLY ENGAGED. THE PROBLEM WAS MORE PRONOUNCED WHEN TURNING ONTO A ROAD WHILE ACCELERATING TO MERGE WITH TRAFFIC, AND THE SHUDDERING WAS STRONGER AT THE END OF A DRIVE THAN AT THE BEGINNING. GRADUALLY THE SYMPTOMS BECAME MORE SEVERE, UNTIL I DID NOT FEEL SAFE MERGING INTO TRAFFIC AT NORMAL SPEEDS. AT THAT POINT I TOOK IT IN TO THE DEALER. THE DEALER DID A ROAD TEST AND INSPECTION AND CONCLUDED THE CLUTCH NEEDED REPLACEMENT. THE PART WAS ON NATIONAL BACKORDER AND TOOK 8 WEEKS TO ARRIVE; IN THE MEANTIME I HAD TO CONTINUE DRIVING MY FOCUS WITH ITS DEFECT. THE DEALER REPLACED THE CLUTCH AND HALF-SHAFT SEALS UNDER WARRANTY AT NO CHARGE. THE ISSUE WAS RESOLVED, AND HAS NOT REOCCURRED.
NHTSA ODI #11230502
4,995 miles · Jul 5, 2019
Power Train
WHEN TAKING OFF FROM STAND STILL, IT ACTS AS THOUGH THE TRANSMISSION IS SLIPPING CAUSING A HESITATION
NHTSA ODI #11229525
Mileage unknown · Jun 25, 2019
Power Train
WHEN ACCELERATING FROM A STOP AND WHEN TURNING WHILE IN MOTION ON A CITY STREET AND WHEN ACCELERATING AFTER SLOWING DOWN ON THE HIGHWAY THE TRANSMISSION HESITATES AND MAKES THE CAR JERK AND SHAKE AS IF THE TRANSMISSION IS SLIPPING AND/OR GOING OUT. THIS HAS BEEN AN ONGOING ISSUES SINCE APPROXIMATELY A WEEK AFTER I PURCHASED THE …
Read full complaint
WHEN ACCELERATING FROM A STOP AND WHEN TURNING WHILE IN MOTION ON A CITY STREET AND WHEN ACCELERATING AFTER SLOWING DOWN ON THE HIGHWAY THE TRANSMISSION HESITATES AND MAKES THE CAR JERK AND SHAKE AS IF THE TRANSMISSION IS SLIPPING AND/OR GOING OUT. THIS HAS BEEN AN ONGOING ISSUES SINCE APPROXIMATELY A WEEK AFTER I PURCHASED THE VEHICLE IN JULY OF 2017
NHTSA ODI #11222412
37,000 miles · Jun 21, 2019
Power Train
6-SPEED DUAL CLUTCH AUTOMATIC TRANSMISSION SLIPS WHILE ACCELERATING FROM A STOP, CLUNKS AND RATTLES WHILE SLOWING DOWN TO A STOP. HAS HAPPENED EVERY DAY SINCE I'VE HAD THE CAR.
NHTSA ODI #11221740
27,000 miles · Jun 18, 2019
Power Train
TRANSMISSION PROBLEMS THAT INCLUDE HESITATING, SHUTTERING, AND WHAT FEELS TO BE CLUTCH SLIPPING WITH THEIR "NEW" DOUBLE CLUTCH TRANSMISSION. THIS HAPPENS PERIODICALLY WHEN STARTING FROM A STOP AND USUALLY SHUTTERS THE WHOLE CAR THROUGH 1ST AND 2ND GEAR. SOMETIMES IT FEELS LIKE THE TRANSMISSION IS GOING TO FALL OUT OF THE CAR. AL…
Read full complaint
TRANSMISSION PROBLEMS THAT INCLUDE HESITATING, SHUTTERING, AND WHAT FEELS TO BE CLUTCH SLIPPING WITH THEIR "NEW" DOUBLE CLUTCH TRANSMISSION. THIS HAPPENS PERIODICALLY WHEN STARTING FROM A STOP AND USUALLY SHUTTERS THE WHOLE CAR THROUGH 1ST AND 2ND GEAR. SOMETIMES IT FEELS LIKE THE TRANSMISSION IS GOING TO FALL OUT OF THE CAR. ALONG WITH THE HESITATION AND VIOLENT SHUTTERING I'M WORRIED TO DRIVE MY CAR THAT HAS LESS THAN 30,000 MILES ON IT. I'VE HEARD OF MANY OTHER PEOPLE EXPERIENCING THE SAME PROBLEM AND THE DEALERSHIP CAN'T SEEM TO FIGURE OUT WHAT'S WRONG AND HOW TO FIX IT.
NHTSA ODI #11220966
Official recalls
10Jun 9, 2026
Ford Motor Company (Ford) is recalling certain 2012-2018 Focus vehicles previously repaired incorrectly under recall number 18V735. The Canister Purge Valve (CPV) may malfunction, causing the engine to stall unexpectedly while driving.
Consequence & remedy
Consequence: An engine that stalls while driving increases the risk of a crash.
Remedy: Dealers will update the powertrain control module (PCM) software, free of charge. Owner notification letters were mailed July 29, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S40. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6,2026.
Jun 9, 2026
Ford Motor Company (Ford) is recalling certain 2015-2018 Focus and 2013-2016 Fusion vehicles previously repaired incorrectly under recall numbers 18V169 and 18V845. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
Consequence & remedy
Consequence: A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
Remedy: Dealers will update the software, free of charge. Additionally, dealers will inspect Focus vehicles and replace the clutch assembly as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed August 5, 2026. Additional letters will be sent once the remedy is available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S43. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6,2026.
Jan 15, 2026
Ford Motor Company (Ford) is recalling certain 2013-2018 Focus, 2013-2019 Escape, and 2015-2016 MKC vehicles equipped with a 2.0L engine. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Consequence & remedy
Consequence: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed March 6, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S01. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026.
Jan 15, 2026
Ford Motor Company (Ford) is recalling certain 2016-2018 Focus, 2019 Explorer, and 2024 Explorer vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Consequence & remedy
Consequence: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded blanking plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed February 13, 2026. Additional letters will be sent once the final remedy is available, anticipated in October 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026. This recall expands previous recall number 25V685.
Dec 22, 2023
Ford Motor Company (Ford) is recalling certain 2016-2018 Ford Focus and 2018-2022 Ford EcoSport vehicles. The oil pump drive belt or drive belt tensioner may fail, resulting in a loss of engine oil pressure.
Consequence & remedy
Consequence: A loss of oil pressure can result in an engine stall and a loss of power braking assist, increasing the risk of a crash.
Remedy: Dealers will replace the oil pump tensioner assembly and oil pump drive belt, free of charge. If engine failure occurs due to a damaged oil pump belt and/or oil pump belt tensioner, Ford has authorized dealers to replace the engine assembly as an interim repair before the availability of remedy parts for the final repair. This repair will be free of charge (parts and labor). Owner notification letters were mailed August 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S64.
Jul 5, 2019
Ford Motor Company (Ford) is recalling certain 2012 and 2017 Focus vehicles equipped with 2.0L GDI gasoline engines and 2013-2014 Focus ST vehicles equipped with 2.0L GTDI engines, previously recalled under 18V-735. The affected vehicles did not have the Powertrain Control Module (PCM) updated as intended. Therefore, the Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in the fuel vapor management system.
Consequence & remedy
Consequence: The excessive vacuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began July 29, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S22.
Additional source detail variants (2)
Fuel System, Gasoline:storage:evaporative Emissions:canister
Ford Motor Company (Ford) is recalling certain 2012 and 2017 Focus vehicles equipped with 2.0L GDI gasoline engines and 2013-2014 Focus ST vehicles equipped with 2.0L GTDI engines, previously recalled under 18V-735. The affected vehicles did not have the Powertrain Control Module (PCM) updated as intended. Therefore, the Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in the fuel vapor management system.
Consequence: The excessive vacuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began July 29, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S22.
Fuel System, Gasoline:storage
Ford Motor Company (Ford) is recalling certain 2012 and 2017 Focus vehicles equipped with 2.0L GDI gasoline engines and 2013-2014 Focus ST vehicles equipped with 2.0L GTDI engines, previously recalled under 18V-735. The affected vehicles did not have the Powertrain Control Module (PCM) updated as intended. Therefore, the Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in the fuel vapor management system.
Consequence: The excessive vacuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began July 29, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S22.
Nov 28, 2018
Ford Motor Company (Ford) is recalling certain 2016-2018 Ford Focus vehicles equipped with a 1.0L Fox GTDI engine and a 6-speed manual transmission. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
Consequence & remedy
Consequence: A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
Remedy: Ford will notify owners, and dealers will update vehicles with software that detects and prevents prolonged clutch slip, and will replace the clutch, as necessary, free of charge. The recall began January 17, 2019. Owners may contact Ford at 1-866-436-7332. Ford's number for this recall is 18S07. Note: This recall is an expansion of Recall 18V-169.
Oct 22, 2018
Ford Motor Company (Ford) is recalling certain 2012-2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system.
Consequence & remedy
Consequence: The excessive vaccuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began August 19, 2019. Owners may contact Ford Customer service at 1-866-436-7332. Ford's number for this recall is 18S32. Note: Until the vehicle is serviced for this concern, owners are advised to keep the fuel tank at least halfway full.
Additional source detail variants (2)
Fuel System, Gasoline:storage:evaporative Emissions:canister
Ford Motor Company (Ford) is recalling certain 2012-2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system.
Consequence: The excessive vaccuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began August 19, 2019. Owners may contact Ford Customer service at 1-866-436-7332. Ford's number for this recall is 18S32. Note: Until the vehicle is serviced for this concern, owners are advised to keep the fuel tank at least halfway full.
Fuel System, Gasoline:storage
Ford Motor Company (Ford) is recalling certain 2012-2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system.
Consequence: The excessive vaccuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began August 19, 2019. Owners may contact Ford Customer service at 1-866-436-7332. Ford's number for this recall is 18S32. Note: Until the vehicle is serviced for this concern, owners are advised to keep the fuel tank at least halfway full.
Aug 28, 2017
Ford Motor Company (Ford) is recalling certain 2017 Focus vehicles. The rear left side seat back frame may have an insufficient weld between the outboard pivot bracket and the pivot nut joint, resulting in the seat back having reduced strength. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems," and 210, "Seat Belt Assembly Anchorages."
Consequence & remedy
Consequence: The reduced seat back strength may increase the risk of injury in the event of a crash.
Remedy: Ford will notify owners, and dealers will inspect and replace the rear second left side rear seat back as necessary, free of charge. The recall began October 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17C13.
Additional source detail variants (2)
Seats:mid/rear Assembly
Ford Motor Company (Ford) is recalling certain 2017 Focus vehicles. The rear left side seat back frame may have an insufficient weld between the outboard pivot bracket and the pivot nut joint, resulting in the seat back having reduced strength. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems," and 210, "Seat Belt Assembly Anchorages."
Consequence: The reduced seat back strength may increase the risk of injury in the event of a crash.
Remedy: Ford will notify owners, and dealers will inspect and replace the rear second left side rear seat back as necessary, free of charge. The recall began October 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17C13.
Seat Belts:rear/other
Ford Motor Company (Ford) is recalling certain 2017 Focus vehicles. The rear left side seat back frame may have an insufficient weld between the outboard pivot bracket and the pivot nut joint, resulting in the seat back having reduced strength. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems," and 210, "Seat Belt Assembly Anchorages."
Consequence: The reduced seat back strength may increase the risk of injury in the event of a crash.
Remedy: Ford will notify owners, and dealers will inspect and replace the rear second left side rear seat back as necessary, free of charge. The recall began October 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17C13.
Sep 28, 2016
Ford Motor Company (Ford) is recalling certain model year 2013-2017 Ford Focus hatchback vehicles manufactured February 14, 2012, to August 26, 2016 and equipped with a manual transmission. The hatchback of the affected vehicles may be unlatched with a single press of the interior latch release button. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."
Consequence & remedy
Consequence: With only a single press needed, the driver may accidently unlatch the hatchback, increasing the risk of injury to any unsecured passengers in the back.
Remedy: Ford will notify owners, and dealers will reprogram the Body Control Module with updated software, free of charge. The recall began February 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16C13.
Additional source detail variants (2)
Latches/locks/linkages:hatchback/liftgate:lock
Ford Motor Company (Ford) is recalling certain model year 2013-2017 Ford Focus hatchback vehicles manufactured February 14, 2012, to August 26, 2016 and equipped with a manual transmission. The hatchback of the affected vehicles may be unlatched with a single press of the interior latch release button. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."
Consequence: With only a single press needed, the driver may accidently unlatch the hatchback, increasing the risk of injury to any unsecured passengers in the back.
Remedy: Ford will notify owners, and dealers will reprogram the Body Control Module with updated software, free of charge. The recall began February 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16C13.
Structure:body:hatchback/liftgate
Ford Motor Company (Ford) is recalling certain model year 2013-2017 Ford Focus hatchback vehicles manufactured February 14, 2012, to August 26, 2016 and equipped with a manual transmission. The hatchback of the affected vehicles may be unlatched with a single press of the interior latch release button. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."
Consequence: With only a single press needed, the driver may accidently unlatch the hatchback, increasing the risk of injury to any unsecured passengers in the back.
Remedy: Ford will notify owners, and dealers will reprogram the Body Control Module with updated software, free of charge. The recall began February 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16C13.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
5EA26004 · Timing Belt Failure
Opened Jul 31, 2026 · No close date supplied
Status: open (inferred from source dates) · Engine; Engine And Engine Cooling:engine:gasoline:belts And Associated Pulleys
On December 18, 2025, the Office of Defects Investigation (ODI) opened PE25020 to investigate instances of timing belt failure in model year (MY) 2015-2017 Ford Fiesta and MY 2015-2018 Ford Focus vehicles manufactured by Ford Motor Company (Ford), equipped with a 1.0L engine and manual transmission (subject vehicles). Additionally, MY 2018-2021 Ford EcoSport and MY 2016-2018 Focus vehicles with a 1.0L engine and automatic transmission were analyzed as peer vehicles because they utilize a wet timing belt comprised of similar material as the timing belt in the subject vehicles. Through the PE, ODI investigated a potential failure/degradation of the timing belt that may affect oil pump function resulting in a lack of engine lubrication and potential loss of motive power. The complaints commonly allege a low engine oil pressure warning lamp immediately preceding a complete loss or reduction of motive power while the vehicle is in motion. Some complaints allege that a sudden loss of motive power or engine seizure occurred without warning or prior detectable symptoms. ODI’s analysis supports that this failure can occur without sufficient and advanced warning to the driver that a loss of motive power/engine seizure is imminent. ODI found that the timing belt material may degrade and create debris that clogs the mesh oil pump pick-up screen, resulting in reduced oil pressure in the engine. As additional debris accumulates on the screen, this can progress to a loss of motive power while driving due to a lack of engine lubrication. The failure data provided in response to this investigation revealed an average failure mileage of approximately 70,000 miles, and that 98% of the failures occurred prior to the 150,000 mile timing belt replacement interval per the vehicles’ maintenance schedule. Based on evidence collected via consumer surveys and an engine teardown, failures have occurred despite evidence of proper and routine oil maintenance. The oil pump pick-up screen is not serviceable, so debris accumulation cannot be inspected or manually removed without removing the engine from the vehicle. On June 2, 2026, Ford informed ODI of a non-safety customer satisfaction program for global vehicles with the 1.0L Fox Classic Timing Belt. This program will notify customers globally of a revised maintenance interval for the timing belt, reducing the original 150,000 mile interval down to 100,000 miles/6 years. This customer satisfaction program will also offer reimbursement to eligible customers who previously paid to have their engine repaired or replaced due to a timing belt related issue. Based on NHTSA’s analysis of the data, failure rates, information provided by Ford, preliminary engine teardown analysis, and precedent recalls regarding loss of engine oil pressure with the presence of driver facing warnings, ODI believes there is an unreasonable risk to motor vehicle safety. ODI is opening this Engineering Analysis to perform component-level and vehicle testing. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Engine And Engine Cooling:engine:gasoline:belts And Associated Pulleys
On December 18, 2025, the Office of Defects Investigation (ODI) opened PE25020 to investigate instances of timing belt failure in model year (MY) 2015-2017 Ford Fiesta and MY 2015-2018 Ford Focus vehicles manufactured by Ford Motor Company (Ford), equipped with a 1.0L engine and manual transmission (subject vehicles). Additionally, MY 2018-2021 Ford EcoSport and MY 2016-2018 Focus vehicles with a 1.0L engine and automatic transmission were analyzed as peer vehicles because they utilize a wet timing belt comprised of similar material as the timing belt in the subject vehicles. Through the PE, ODI investigated a potential failure/degradation of the timing belt that may affect oil pump function resulting in a lack of engine lubrication and potential loss of motive power. The complaints commonly allege a low engine oil pressure warning lamp immediately preceding a complete loss or reduction of motive power while the vehicle is in motion. Some complaints allege that a sudden loss of motive power or engine seizure occurred without warning or prior detectable symptoms. ODI’s analysis supports that this failure can occur without sufficient and advanced warning to the driver that a loss of motive power/engine seizure is imminent. ODI found that the timing belt material may degrade and create debris that clogs the mesh oil pump pick-up screen, resulting in reduced oil pressure in the engine. As additional debris accumulates on the screen, this can progress to a loss of motive power while driving due to a lack of engine lubrication. The failure data provided in response to this investigation revealed an average failure mileage of approximately 70,000 miles, and that 98% of the failures occurred prior to the 150,000 mile timing belt replacement interval per the vehicles’ maintenance schedule. Based on evidence collected via consumer surveys and an engine teardown, failures have occurred despite evidence of proper and routine oil maintenance. The oil pump pick-up screen is not serviceable, so debris accumulation cannot be inspected or manually removed without removing the engine from the vehicle. On June 2, 2026, Ford informed ODI of a non-safety customer satisfaction program for global vehicles with the 1.0L Fox Classic Timing Belt. This program will notify customers globally of a revised maintenance interval for the timing belt, reducing the original 150,000 mile interval down to 100,000 miles/6 years. This customer satisfaction program will also offer reimbursement to eligible customers who previously paid to have their engine repaired or replaced due to a timing belt related issue. Based on NHTSA’s analysis of the data, failure rates, information provided by Ford, preliminary engine teardown analysis, and precedent recalls regarding loss of engine oil pressure with the presence of driver facing warnings, ODI believes there is an unreasonable risk to motor vehicle safety. ODI is opening this Engineering Analysis to perform component-level and vehicle testing. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Engine
On December 18, 2025, the Office of Defects Investigation (ODI) opened PE25020 to investigate instances of timing belt failure in model year (MY) 2015-2017 Ford Fiesta and MY 2015-2018 Ford Focus vehicles manufactured by Ford Motor Company (Ford), equipped with a 1.0L engine and manual transmission (subject vehicles). Additionally, MY 2018-2021 Ford EcoSport and MY 2016-2018 Focus vehicles with a 1.0L engine and automatic transmission were analyzed as peer vehicles because they utilize a wet timing belt comprised of similar material as the timing belt in the subject vehicles. Through the PE, ODI investigated a potential failure/degradation of the timing belt that may affect oil pump function resulting in a lack of engine lubrication and potential loss of motive power. The complaints commonly allege a low engine oil pressure warning lamp immediately preceding a complete loss or reduction of motive power while the vehicle is in motion. Some complaints allege that a sudden loss of motive power or engine seizure occurred without warning or prior detectable symptoms. ODI’s analysis supports that this failure can occur without sufficient and advanced warning to the driver that a loss of motive power/engine seizure is imminent. ODI found that the timing belt material may degrade and create debris that clogs the mesh oil pump pick-up screen, resulting in reduced oil pressure in the engine. As additional debris accumulates on the screen, this can progress to a loss of motive power while driving due to a lack of engine lubrication. The failure data provided in response to this investigation revealed an average failure mileage of approximately 70,000 miles, and that 98% of the failures occurred prior to the 150,000 mile timing belt replacement interval per the vehicles’ maintenance schedule. Based on evidence collected via consumer surveys and an engine teardown, failures have occurred despite evidence of proper and routine oil maintenance. The oil pump pick-up screen is not serviceable, so debris accumulation cannot be inspected or manually removed without removing the engine from the vehicle. On June 2, 2026, Ford informed ODI of a non-safety customer satisfaction program for global vehicles with the 1.0L Fox Classic Timing Belt. This program will notify customers globally of a revised maintenance interval for the timing belt, reducing the original 150,000 mile interval down to 100,000 miles/6 years. This customer satisfaction program will also offer reimbursement to eligible customers who previously paid to have their engine repaired or replaced due to a timing belt related issue. Based on NHTSA’s analysis of the data, failure rates, information provided by Ford, preliminary engine teardown analysis, and precedent recalls regarding loss of engine oil pressure with the presence of driver facing warnings, ODI believes there is an unreasonable risk to motor vehicle safety. ODI is opening this Engineering Analysis to perform component-level and vehicle testing. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
PE25020 · Timing Belt Failure
Opened Dec 18, 2025 · Closed Jul 31, 2026
Status: closed (inferred from source dates) · Engine; Engine And Engine Cooling:engine:gasoline:belts And Associated Pulleys
On December 18, 2025, the Office of Defects Investigation (ODI) opened PE25020 to investigate instances of timing belt failure in model year (MY) 2015-2017 Ford Fiesta and MY 2015-2018 Ford Focus vehicles manufactured by Ford Motor Company (Ford), equipped with a 1.0L engine and manual transmission (subject vehicles). Additionally, MY 2018-2021 Ford EcoSport and MY 2016-2018 Focus vehicles with a 1.0L engine and automatic transmission were analyzed as peer vehicles because they utilize a wet timing belt comprised of similar material as the timing belt in the subject vehicles. Through the PE, ODI investigated a potential failure/degradation of the timing belt that may affect oil pump function resulting in a lack of engine lubrication and potential loss of motive power. The complaints commonly allege a low engine oil pressure warning lamp immediately preceding a complete loss or reduction of motive power while the vehicle is in motion. Some complaints allege that a sudden loss of motive power or engine seizure occurred without warning or prior detectable symptoms. ODI’s analysis supports that this failure can occur without sufficient and advanced warning to the driver that a loss of motive power/engine seizure is imminent. ODI found that the timing belt material may degrade and create debris that clogs the mesh oil pump pick-up screen, resulting in reduced oil pressure in the engine. As additional debris accumulates on the screen, this can progress to a loss of motive power while driving due to a lack of engine lubrication. The failure data provided in response to this investigation revealed an average failure mileage of approximately 70,000 miles, and that 98% of the failures occurred prior to the 150,000 mile timing belt replacement interval per the vehicles’ maintenance schedule. Based on evidence collected via consumer surveys and an engine teardown, failures have occurred despite evidence of proper and routine oil maintenance. The oil pump pick-up screen is not serviceable, so debris accumulation cannot be inspected or manually removed without removing the engine from the vehicle. On June 2, 2026, Ford informed ODI of a non-safety customer satisfaction program for global vehicles with the 1.0L Fox Classic Timing Belt. This program will notify customers globally of a revised maintenance interval for the timing belt, reducing the original 150,000 mile interval down to 100,000 miles/6 years. This customer satisfaction program will also offer reimbursement to eligible customers who previously paid to have their engine repaired or replaced due to a timing belt related issue. Based on NHTSA’s analysis of the data, failure rates, information provided by Ford, preliminary engine teardown analysis, and precedent recalls regarding loss of engine oil pressure with the presence of driver facing warnings, ODI believes there is an unreasonable risk to motor vehicle safety. Therefore, this Preliminary Evaluation is being upgraded to an Engineering Analysis (EA26004). During this Engineering Analysis, the agency plans to perform component-level and vehicle testing. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Engine And Engine Cooling:engine:gasoline:belts And Associated Pulleys
On December 18, 2025, the Office of Defects Investigation (ODI) opened PE25020 to investigate instances of timing belt failure in model year (MY) 2015-2017 Ford Fiesta and MY 2015-2018 Ford Focus vehicles manufactured by Ford Motor Company (Ford), equipped with a 1.0L engine and manual transmission (subject vehicles). Additionally, MY 2018-2021 Ford EcoSport and MY 2016-2018 Focus vehicles with a 1.0L engine and automatic transmission were analyzed as peer vehicles because they utilize a wet timing belt comprised of similar material as the timing belt in the subject vehicles. Through the PE, ODI investigated a potential failure/degradation of the timing belt that may affect oil pump function resulting in a lack of engine lubrication and potential loss of motive power. The complaints commonly allege a low engine oil pressure warning lamp immediately preceding a complete loss or reduction of motive power while the vehicle is in motion. Some complaints allege that a sudden loss of motive power or engine seizure occurred without warning or prior detectable symptoms. ODI’s analysis supports that this failure can occur without sufficient and advanced warning to the driver that a loss of motive power/engine seizure is imminent. ODI found that the timing belt material may degrade and create debris that clogs the mesh oil pump pick-up screen, resulting in reduced oil pressure in the engine. As additional debris accumulates on the screen, this can progress to a loss of motive power while driving due to a lack of engine lubrication. The failure data provided in response to this investigation revealed an average failure mileage of approximately 70,000 miles, and that 98% of the failures occurred prior to the 150,000 mile timing belt replacement interval per the vehicles’ maintenance schedule. Based on evidence collected via consumer surveys and an engine teardown, failures have occurred despite evidence of proper and routine oil maintenance. The oil pump pick-up screen is not serviceable, so debris accumulation cannot be inspected or manually removed without removing the engine from the vehicle. On June 2, 2026, Ford informed ODI of a non-safety customer satisfaction program for global vehicles with the 1.0L Fox Classic Timing Belt. This program will notify customers globally of a revised maintenance interval for the timing belt, reducing the original 150,000 mile interval down to 100,000 miles/6 years. This customer satisfaction program will also offer reimbursement to eligible customers who previously paid to have their engine repaired or replaced due to a timing belt related issue. Based on NHTSA’s analysis of the data, failure rates, information provided by Ford, preliminary engine teardown analysis, and precedent recalls regarding loss of engine oil pressure with the presence of driver facing warnings, ODI believes there is an unreasonable risk to motor vehicle safety. Therefore, this Preliminary Evaluation is being upgraded to an Engineering Analysis (EA26004). During this Engineering Analysis, the agency plans to perform component-level and vehicle testing. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Engine
On December 18, 2025, the Office of Defects Investigation (ODI) opened PE25020 to investigate instances of timing belt failure in model year (MY) 2015-2017 Ford Fiesta and MY 2015-2018 Ford Focus vehicles manufactured by Ford Motor Company (Ford), equipped with a 1.0L engine and manual transmission (subject vehicles). Additionally, MY 2018-2021 Ford EcoSport and MY 2016-2018 Focus vehicles with a 1.0L engine and automatic transmission were analyzed as peer vehicles because they utilize a wet timing belt comprised of similar material as the timing belt in the subject vehicles. Through the PE, ODI investigated a potential failure/degradation of the timing belt that may affect oil pump function resulting in a lack of engine lubrication and potential loss of motive power. The complaints commonly allege a low engine oil pressure warning lamp immediately preceding a complete loss or reduction of motive power while the vehicle is in motion. Some complaints allege that a sudden loss of motive power or engine seizure occurred without warning or prior detectable symptoms. ODI’s analysis supports that this failure can occur without sufficient and advanced warning to the driver that a loss of motive power/engine seizure is imminent. ODI found that the timing belt material may degrade and create debris that clogs the mesh oil pump pick-up screen, resulting in reduced oil pressure in the engine. As additional debris accumulates on the screen, this can progress to a loss of motive power while driving due to a lack of engine lubrication. The failure data provided in response to this investigation revealed an average failure mileage of approximately 70,000 miles, and that 98% of the failures occurred prior to the 150,000 mile timing belt replacement interval per the vehicles’ maintenance schedule. Based on evidence collected via consumer surveys and an engine teardown, failures have occurred despite evidence of proper and routine oil maintenance. The oil pump pick-up screen is not serviceable, so debris accumulation cannot be inspected or manually removed without removing the engine from the vehicle. On June 2, 2026, Ford informed ODI of a non-safety customer satisfaction program for global vehicles with the 1.0L Fox Classic Timing Belt. This program will notify customers globally of a revised maintenance interval for the timing belt, reducing the original 150,000 mile interval down to 100,000 miles/6 years. This customer satisfaction program will also offer reimbursement to eligible customers who previously paid to have their engine repaired or replaced due to a timing belt related issue. Based on NHTSA’s analysis of the data, failure rates, information provided by Ford, preliminary engine teardown analysis, and precedent recalls regarding loss of engine oil pressure with the presence of driver facing warnings, ODI believes there is an unreasonable risk to motor vehicle safety. Therefore, this Preliminary Evaluation is being upgraded to an Engineering Analysis (EA26004). During this Engineering Analysis, the agency plans to perform component-level and vehicle testing. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
PE23015 · Oil Pump Failure
Opened Sep 20, 2023 · Closed Feb 14, 2024
Status: closed (inferred from source dates) · Engine And Engine Cooling:engine:oil/lubrication:pump
On September 20, 2023, the Office of Defects Investigation (ODI) opened PE23-015 to investigate instances of engine failure due to loss of oil pressure in model year (MY) 2018-2021 Ford EcoSport vehicles. Some consumers reported a low engine oil pressure warning lamp immediately preceding a complete loss or reduction of motive power while the vehicle was in motion. The investigation revealed that the engine oil pump drive belt tensioner arm may fracture, separate from the tensioner backing plate, and/or the oil pump drive belt may degrade and lose teeth, resulting in a loss of engine oil pressure. A loss of engine oil pressure can result in engine seizure, which can result in a loss of motive power and a loss of mechanical vacuum pump required to provide power braking assist, increase the risk of a crash. On December 22, 2023, Ford filed recall 23V-905 for certain MY 2016-2018 Ford Focus and 2018-2022 Ford EcoSport vehicles. The recall remedy provides the replacement of the oil pump drive belt tensioner assembly and oil pump drive belt with redesigned parts to improve robustness. In view of the recall action being taken by Ford, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
RQ23006 · Loss Of Motive Power
Opened Sep 15, 2023 · Closed Dec 20, 2024
Status: closed (inferred from source dates) · Fuel System, Gasoline:storage:evaporative Emissions:canister
On September 15, 2023, the Office of Defect Investigation (ODI) opened this Recall Query (RQ) after receiving 98 consumer complaints alleging loss of motive power in model year (MY) 2012-2018 Ford Focus vehicles. The RQ focused on the effectiveness of the remedies of Recall 18V-735 and 19V-515. In October 2018, Ford issued Recall 18V-735, which updated Powertrain Control Module (PCM) software in MY 2012-2018 Ford Focus vehicles equipped with 2.0L GDI engines built prior to April 13, 2017, and those with 2.0L GTDI engines built prior to February 2, 2018. The recall addressed vehicles experiencing a malfunctioning Canister Purge Valve (CPV) that can stick open and PCM software that does not adequately detect a stuck-open CPV condition. A CPV that is stuck open can cause excessive vacuum in the fuel vapor management system, potentially deforming the fuel tank, collapsing on itself. This deformation of the fuel tank can cause a Malfunction Indicator Light (MIL) to illuminate, an inaccurate or erratic fuel gauge indication, drivability issues, and/or loss of motive power. In July 2019, Ford issued Recall 19V-515, which addressed certain MY 2012 and MY 2017 Ford Focus vehicles equipped with 2.0L GDI and MY 2013-2014 Ford Focus vehicles equipped with 2.0L GTDI engines whose PCM software had been reprogrammed as a part of recall 18V-735. The updated software calibrations for these subject vehicles were not properly installed by Ford at the time of production. Approximately one year after this RQ was opened, on September 25, 2024, Ford initiated a customer satisfaction program (24N07) for MY 2012-2018 Ford Focus vehicles equipped with the 2.0L GDI and GTDI engines to—as ODI learned during this investigation—address a different issue with the CPV from the primary focus of the safety recalls (18V-735 and 19V-515). Ford stated the CPV may not operate as intended in these vehicles. A failed CPV on its own merit, may cause drivability concerns such as engine hesitation, running rough, or stalling at low speed, which will be accompanied by an illuminated MIL. This program provides a one-time replacement of the CPV for vehicles with 15 years of service or less (with no mileage restriction). This coverage will automatically transfer to subsequent owners. It is to be noted that the customer satisfaction program being taken by Ford to address this RQ investigation results in a much different and significantly less severe problem than the safety action taken to remedy 18V-735 and 19V-515. ODI found no further issues with the combined scope and severity related to 18V-735 and 19V-515 therefore, ODI is closing this Recall Query. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Illustration