2021 Ford F-250 Sd

I was driving on I-77 WV Turnpike when suddenly my moon roof shattered. No other vehicles were around and no overpasses in sight. When I pulled over, the glass was raised as if the blowout came from inside the vehicle. It sounded like a gunshot went off inside my truck. Vehicle has been repaired. Replacement glass was $1,800.00

The vehicle experienced a sudden loss of motive power and became inoperable due to failure of the high-pressure fuel system. This VIN is subject to an active safety recall (NHTSA 24V957 / Ford 24S78) addressing high-pressure fuel pump failure that can result in loss of motive power while driving. Prior to failure, the vehicle exhibited reduced engine performance and drivability issues consistent with fuel system malfunction. No Water-In-Fuel warning or alert was displayed prior to the failure. The vehicle was inspected by an authorized Ford dealership. Ford and the dealership asserted “fuel contamination” as the cause and refused to repair the vehicle under the recall or warranty unless the customer paid for diagnostic teardown. The recall repair was not performed. The vehicle remains unrepaired and was removed from the dealership. The loss of motive power created a safety risk to the occupants and other motorists. We are concerned that a recalled safety defect affecting the fuel system is not being remedied and is being mischaracterized to avoid recall repair.

I have been experiencing a brake problem with the trailer brake system in my 2021 Ford F250 Crew Cab. When my travel trailer is connected to the truck the trailer brakes do not always apply and sometimes the brakes apply, then release and then apply again. On my most recent trip, I traveled half way through an intersection before stopping because the trailer brakes did not apply. The trailer brakes were replaced two years ago and were just inspected on January 27th of this year. They were rated in excellent condition. I took the trip soon after the trailer brakes were inspected and I still am experiencing trailer brake controller issues. I tested the condition at low speed just using the brake controller and the brakes applied then released and then applied again. I spoke with Ford today and they stated that the current recall campaign 25V132000 does not apply to my truck. I requested that they consider expanding the recall as my truck is exhibiting the exact conditions described in the recall. I am attempting to get the truck into the local Ford Dealer, but they are backed up four weeks until they can inspect the truck. This is a very dangerous situation and needs to be addressed.

The contact owns a 2021 Ford F-250. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

The contact called to report a failure on a 2021 Ford F-250. The contact, who is a Crash Investigator, stated that the owner of the vehicle was involved in a crash. While the owner was driving at an undisclosed speed in the opposite lane, the driver ended up in a head-on collision. No other information was available. While inspecting the Air Bag Control Module after downloading the information, there was no crash or air bags deployment information retrieved. The contact stated that there was a pattern of the faulty part being distributed from a manufacturing plant for the manufacturer located in Kentucky, because this was not the first issue with a Ford F-250 vehicle experiencing the exact failure. The contact was concerned that if vehicle owners were involved in a crash, the air bags modules would not collect or store data, making it difficult to investigate the crash. The failure was due to the Air Bag Control Module, Event Data Recorder, and Restraint Control Module, which were unable to download the needed information. The vehicle was towed and taken to the insurance company's lot. The manufacturer was notified of the failure. The failure mileage was not available.

The contact called to file a complaint on a 2021 Ford F-250. The contact was a Crash Investigator. The contact stated that the vehicle owner was involved in a crash. The contact stated that while driving at an undisclosed speed in the opposite lane, the vehicle was involved in a head-on collision. No other information was available. The contact stated that while inspecting the Air Bag Control Module, it was downloaded; however, there was no reported crash data information of the crash or that the air bags were deployed. The contact stated that there was a pattern with the faulty part being distributed from a manufacturing plant for the manufacturer located in Kentucky. The contact stated that other similar vehicles had experienced similar failures. The contact was concerned that if vehicle owners were involved in a crash, none of the air bags modules would collect or store the data, making it difficult to investigate the crash. The contact stated that the failure was due to Air Bag Control Module, Event Data Recorder, and the Restraint Control Module not being able to download the needed information. The vehicle was towed and taken to the insurance company's lot. The manufacturer was notified of the issue. The failure mileage was not available.

The drivers side door latch does not allow the driver to exist the vehicle as the door lock on the drivers door has only worked intermittently. When the lock doesn’t unlock on the drivers door, I have to use the passenger or rear doors to enter and/or exit the vehicle. The drivers door won’t even allow me to manually unlock the door using the latch—when I grip the latch tight enough to grab the door lock pin it cannot even be pulled up manually, it’s as if it is being pulled back down with heavy force. This is a significant hazard in the event of an emergency as I cannot exit the vehicle. The truck only has -7,000 miles on it and is in like new condition. This began back in August of 2024, but then stopped for a while and returned intermittently, but now seems to be a regular occurrence. This need to be addressed by Ford ASAP.

The contact owns a 2021 Ford F-250. The contact received notification of NHTSA Campaign Number: 25V686000 (Back Over Prevention). The contact stated that while in reverse(R), the rear-view camera went black and failed to operate. Additionally, the Blind Spot Monitoring indicators on both the driver’s and passenger’s side exterior mirrors were inoperable. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 48,000.