The contact owns a 2008 Ford Escape. The contact stated that while driving at an undisclosed speed, the vehicle lost power steering functionality. The contact stated that the steering wheel was uncontrollable. There were no warning lights illuminated. The vehicle was taken to the local dealer to be diagnosed. The contact was inf…
Read full complaint
The contact owns a 2008 Ford Escape. The contact stated that while driving at an undisclosed speed, the vehicle lost power steering functionality. The contact stated that the steering wheel was uncontrollable. There were no warning lights illuminated. The vehicle was taken to the local dealer to be diagnosed. The contact was informed that the ignition module switch needed to be replaced. The contact was informed that parts were on backorder. The vehicle was not repaired. The contact stated that the failure was related to NHTSA Campaign Number: 14V284000 (Steering). The manufacturer was not contacted. The approximate failure mileage was 126,000.
NHTSA ODI #11478372
Mileage unknown · Jul 14, 2022
Steering
The contact owns a 2008 Ford Escape. The contact stated while starting the vehicle, the vehicle was without power steering assist functionality. The contact stated no warning light was illuminated. The power steering failure persisted. The vehicle was towed to a dealer. The dealer diagnosed the failure and determined that the st…
Read full complaint
The contact owns a 2008 Ford Escape. The contact stated while starting the vehicle, the vehicle was without power steering assist functionality. The contact stated no warning light was illuminated. The power steering failure persisted. The vehicle was towed to a dealer. The dealer diagnosed the failure and determined that the steering column needed to be replaced. The vehicle had not been repaired. The manufacturer had been informed of the failure. The contact researched online and related the failure to NHTSA Campaign Number: 14V284000 (Steering). The failure mileage was unknown.
NHTSA ODI #11473936
Mileage unknown · Jul 14, 2022
Steering
The power steering assist failed when I was driving home about 2 months ago. I cannot afford repair to the Power steering assist. The warning light came on as it failed. It put myself and the person with me at risk, as we were on a major highway. The Ford recall number as of 2014 is 14S05. My mechanic said it is most likely the …
Read full complaint
The power steering assist failed when I was driving home about 2 months ago. I cannot afford repair to the Power steering assist. The warning light came on as it failed. It put myself and the person with me at risk, as we were on a major highway. The Ford recall number as of 2014 is 14S05. My mechanic said it is most likely the Power Steering Assist motor.
NHTSA ODI #11473802
78,000 miles · Jun 2, 2022
Steering
The contact owns a 2008 Ford Escape. The contact stated that while driving at various speeds, the power steering malfunctioned causing the steering wheel to vibrate and become very difficult to turn in either direction. The vehicle was taken to an independent mechanic who replaced the torque sensor but the vehicle would erroneou…
Read full complaint
The contact owns a 2008 Ford Escape. The contact stated that while driving at various speeds, the power steering malfunctioned causing the steering wheel to vibrate and become very difficult to turn in either direction. The vehicle was taken to an independent mechanic who replaced the torque sensor but the vehicle would erroneously steer to the right. The vehicle was taken to the local dealer who diagnosed that the entire steering column was faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure and the contact was informed that the vehicle was not included in the NHTSA campaign number 14V284000 (Steering). The contact indicated that the vehicle had experienced the failure listed in the recall. The failure mileage was 78,000.
NHTSA ODI #11467125
152,000 miles · Apr 27, 2022
Steering
The contact owns a 2008 Ford Escape. The contact stated while driving approximately 45 MPH, he felt the steering wheel jerk to the left and while attempting to correct failure, the vehicle lost power steering functionality. The contact observed that the "power steering assist fault" warning light was illuminated. The contact pul…
Read full complaint
The contact owns a 2008 Ford Escape. The contact stated while driving approximately 45 MPH, he felt the steering wheel jerk to the left and while attempting to correct failure, the vehicle lost power steering functionality. The contact observed that the "power steering assist fault" warning light was illuminated. The contact pulled over safely and turned off the vehicle and upon restarting the vehicle the power steering was still not functioning as needed. The contact called an independent mechanic who went out to where the vehicle was parked and performed a temporary fix. The mechanic advised that the failure was related to NHTSA Campaign Number: 14V284000 (Steering). The contact had not taken the vehicle to a dealer to be repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 152,000.
NHTSA ODI #11462508
Mileage unknown · Apr 19, 2022
Steering
CAR RAN OUT OF GAS AND WAS PROMPTED TO SAFELY STOP CAR I DID, THEN PUT CAR IN NEUTRAL AND WAS ASSISTED IN PUSHING OFF TO NEAREST PARK N RIDE LOT. WAS ABLE TO GET GAS INTO CAR AND WHEN I WENT TO DRIVE IT A PROMPT CAME UP STATING POWER ASSIST FAULT. LOOKED ONLINE HOW TO FIX AND TRIED ONLINE INSTRUCTIONS BUT TO NO AVAIL, PROMPT IS …
Read full complaint
CAR RAN OUT OF GAS AND WAS PROMPTED TO SAFELY STOP CAR I DID, THEN PUT CAR IN NEUTRAL AND WAS ASSISTED IN PUSHING OFF TO NEAREST PARK N RIDE LOT. WAS ABLE TO GET GAS INTO CAR AND WHEN I WENT TO DRIVE IT A PROMPT CAME UP STATING POWER ASSIST FAULT. LOOKED ONLINE HOW TO FIX AND TRIED ONLINE INSTRUCTIONS BUT TO NO AVAIL, PROMPT IS STILL ON DASHBOARD. HAS NOT BEEN DIAGNOSED BY MECHANIC YES CAN BE INSPECTED UPON REQUEST SAFETY WAS OK AS I TURNED HAZARD LIGHTS ON, NO PREVIOUS WARNING SIGN OR MESSAGES PRIOR TO THIS HAPPENING. MILEAGE ON CAR WHEN IT HAPPENED 271,071
NHTSA ODI #11461259
125,000 miles · Apr 14, 2022
Steering
The contact owns a 2008 Ford Escape. The contact stated while driving approximately 25 MPH, the power steering fault warning light illuminated on the instrument panel. The contact lost power steering; however, safely drove to the local mechanic. The mechanic diagnosed the failure to the torque sensor. The vehicle was not repaire…
Read full complaint
The contact owns a 2008 Ford Escape. The contact stated while driving approximately 25 MPH, the power steering fault warning light illuminated on the instrument panel. The contact lost power steering; however, safely drove to the local mechanic. The mechanic diagnosed the failure to the torque sensor. The vehicle was not repaired. The manufacturer was notified of the failure. The contact related the failure to NHTSA Campaign Number: 14V284000 (Steering). The approximate failure mileage was 125,000.
NHTSA ODI #11460808
94,000 miles · Mar 31, 2022
Steering
The contact owns a 2008 Ford Escape. The contact stated that while driving at an undisclosed speed, the steering wheel became inoperable. There were no warning lights illuminated. The vehicle was taken to the local dealer and repaired under NHTSA Campaign number: 14V284000 (Steering) in 2014. The failure recurred in 2019 and was…
Read full complaint
The contact owns a 2008 Ford Escape. The contact stated that while driving at an undisclosed speed, the steering wheel became inoperable. There were no warning lights illuminated. The vehicle was taken to the local dealer and repaired under NHTSA Campaign number: 14V284000 (Steering) in 2014. The failure recurred in 2019 and was repaired by the owner however, the failure recurred. The manufacturer was notified of the failure however, no additional assistance was provided. The approximate failure mileage was 94,000.
NHTSA ODI #11459138
Mileage unknown · Mar 26, 2022
Steering
I was driving on a dirt driveway to visit husband at work, I went to park in grass to avoid getting stuck in mud. Then it started getting difficult to turn my car. I ignored it at first and shut my car off. When I left my destination it was difficult to turn my wheel to back out of the driveway. Started to drive home, could not …
Read full complaint
I was driving on a dirt driveway to visit husband at work, I went to park in grass to avoid getting stuck in mud. Then it started getting difficult to turn my car. I ignored it at first and shut my car off. When I left my destination it was difficult to turn my wheel to back out of the driveway. Started to drive home, could not turn wheel to turn into home driveway. I pulled over on the side of the road, made a y-turn to go back to dirt driveway to had husband check out car. Fluids are full, car sounds fine, belt is fine, no other worries when checked out. We are assuming it’s steering pump from non-mechanics. No safety or injuries. No mechanics available at time to check out car, we live on a rural island with limited resources, will be getting checked out ASAP. No insurance claims No warning lights
NHTSA ODI #11458418
Mileage unknown · Mar 18, 2022
Steering
I was driving my car in a 3 hour trip. I noticed the power steering was going out. My steering wheel was stiff when turning at. It was coming in and out then it stopped. The following day we started our 3 hours trip back but my power steering was not working. The steering wheel again did not want to move and was stiff at the tur…
Read full complaint
I was driving my car in a 3 hour trip. I noticed the power steering was going out. My steering wheel was stiff when turning at. It was coming in and out then it stopped. The following day we started our 3 hours trip back but my power steering was not working. The steering wheel again did not want to move and was stiff at the turn. This could of killed me and my passenger plus our dogs. If I lost power steering while driving on the highest back home could of cost a accident and lives. I had no warning light or a audio warning. The car was running fine before this happened and was not failing on me. The Escape is currently being fixed by a independent service center for the torque sensor. I hoping my power steering will work after.
Ford Motor Company (Ford) is recalling certain model year 2001-2008 Ford Escape and Mercury Mariner vehicles manufactured March 31, 2001, to September 1, 2009. The affected vehicles are equipped with either a 2.3L or 3.0L engine and have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15, 2015. These service repair part transmissions have a shift lever bolt that may not be properly tightened. As a result, the shift control lever could disengage from the transmission without warning.
Consequence & remedy
Consequence: If the shift lever disengages from the transmission, a driver may be unable to shift gear positions and the indicated shift position may not represent the gear position the vehicle is in. Should a disengagement occur while the vehicle is being driven, when the driver goes to stop and park the vehicle, the gear selection indicator may show that the transmission is in the "PARK" position, but the vehicle transmission may not actually be in the "PARK" gear position. If the vehicle is not in the "PARK" position there is a risk the vehicle will roll away as the driver and other occupants exit the vehicle or anytime thereafter. A vehicle rollaway increases the risk of injury to exiting occupants and bystanders.
Remedy: Ford will notify owners, and dealers will inspect the transmissions and either tighten the manual shift lever bolt or replace the manual shift lever assembly. These repairs will be performed free of charge. The recall began on October 23, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S28.
Additional source detail variants (2)
Power Train:automatic Transmission:lever And Linkage:floor Shift
Ford Motor Company (Ford) is recalling certain model year 2001-2008 Ford Escape and Mercury Mariner vehicles manufactured March 31, 2001, to September 1, 2009. The affected vehicles are equipped with either a 2.3L or 3.0L engine and have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15, 2015. These service repair part transmissions have a shift lever bolt that may not be properly tightened. As a result, the shift control lever could disengage from the transmission without warning.
Consequence: If the shift lever disengages from the transmission, a driver may be unable to shift gear positions and the indicated shift position may not represent the gear position the vehicle is in. Should a disengagement occur while the vehicle is being driven, when the driver goes to stop and park the vehicle, the gear selection indicator may show that the transmission is in the "PARK" position, but the vehicle transmission may not actually be in the "PARK" gear position. If the vehicle is not in the "PARK" position there is a risk the vehicle will roll away as the driver and other occupants exit the vehicle or anytime thereafter. A vehicle rollaway increases the risk of injury to exiting occupants and bystanders.
Remedy: Ford will notify owners, and dealers will inspect the transmissions and either tighten the manual shift lever bolt or replace the manual shift lever assembly. These repairs will be performed free of charge. The recall began on October 23, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S28.
Power Train:automatic Transmission:gear Position Indication (prndl)
Ford Motor Company (Ford) is recalling certain model year 2001-2008 Ford Escape and Mercury Mariner vehicles manufactured March 31, 2001, to September 1, 2009. The affected vehicles are equipped with either a 2.3L or 3.0L engine and have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15, 2015. These service repair part transmissions have a shift lever bolt that may not be properly tightened. As a result, the shift control lever could disengage from the transmission without warning.
Consequence: If the shift lever disengages from the transmission, a driver may be unable to shift gear positions and the indicated shift position may not represent the gear position the vehicle is in. Should a disengagement occur while the vehicle is being driven, when the driver goes to stop and park the vehicle, the gear selection indicator may show that the transmission is in the "PARK" position, but the vehicle transmission may not actually be in the "PARK" gear position. If the vehicle is not in the "PARK" position there is a risk the vehicle will roll away as the driver and other occupants exit the vehicle or anytime thereafter. A vehicle rollaway increases the risk of injury to exiting occupants and bystanders.
Remedy: Ford will notify owners, and dealers will inspect the transmissions and either tighten the manual shift lever bolt or replace the manual shift lever assembly. These repairs will be performed free of charge. The recall began on October 23, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S28.
Ford Motor Company (Ford) is recalling certain model year 2005-2008 Ford Escape hybrid electric vehicles manufactured October 13, 2003, to June 20, 2008, and 2006-2008 Mercury Mariner hybrid electric vehicles manufactured June 10, 2005, to June 20, 2008. The coolant pump for the hybrid system may fail resulting in the hybrid electronics overheating.
Consequence & remedy
Consequence: If the hybrid electronics system overheats, it may shut down the powertrain, resulting in a stall-like condition, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will inspect and replace the original Motor Electronics Coolant (MEC) Pump with an improved brushless pump, free of charge. The recall is expected to begin on October 27, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S19.
Ford Motor Company (Ford) is recalling certain model year 2008-2011 Ford Escape and Mercury Mariner vehicles manufactured August 18, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the system could remove the Electric Power Steering (EPS) assist.
Consequence & remedy
Consequence: If power steering assist is lost, greater driver effort would be required to steer the vehicle at low speeds, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will update the software for the power steering control module (PSCM) and the instrument cluster module, free of charge. If a vehicle shows a history of a loss of the torque sensor signal or fault codes relating to the PSCM when the vehicle is brought in for the recall remedy, the affected components will be replaced, free of charge. The recall began on July 18, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S05.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
3
DP15001 · Loss Of Power Steering While Driving
Opened Apr 1, 2015 · Closed Jun 14, 2018
Status: closed (inferred from source dates) · Steering:electric Power Assist System
On May 27, 2014, amended June 2, 2014, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA describing a safety defect that may result in a sudden loss of power steering assist while driving in approximately 746,067 model year (MY) 2008 through 2011 Ford Escape vehicles equipped with electric power assisted steering (NHTSA 14V-284, Ford 14S05). Ford's DIR described the defect condition as a poor signal to noise ratio [SNR] in the torque sensor within the Electric Power Assisted Steering (EPAS) system [which] does not allow the PSCM to determine the driver's steering input. When the system detects this fault condition, it transitions the EPAS system to the fail-safe/manual steering mode.Ford's DIR indicates that loss of power steering assist while driving would require higher steering effort at lower vehicle speeds, which may result in an increased risk of a crash.Ford's remedy instructs dealers to check the Power Steering Control Module (PSCM) for Diagnostic Trouble Codes (DTCs) to determine the proper repair procedure. If no DTCs are present, dealers are to update the PSCM and instrument cluster module software. The updated PSCM software changes the torque sensor fault strategy so that the SNR condition does not result in a loss of power steering assist while driving.In addition, audible and visual warnings are provided for torque sensor faults.If DTCs indicating faults in the torque sensor, PSCM or Power Steering Motor (motor) are present in the initial recall inspection, the dealer performs the following repairs: 1) replaces the torque sensor for torque sensor faults (DTC B2278); or 2) replaces the steering column for faults related to the PSCM (DTC B1342) or motor (DTC B2277).Continued in attachment pages
DP12006 · Electronic Throttle Body Malfunction
Opened Oct 2, 2012 · Closed Feb 21, 2013
Status: closed (inferred from source dates) · Engine
In a letter dated August 30, 2012, The North Carolina Consumers Council (NCCC) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged electronic throttle body failures resulting in engine stall or surge while driving in model year (MY) 2005 through 2012 Ford Escape vehicles. On October 2, 2012 the Office of Defects Investigation (ODI) opened a Defect Petition DP12-006 to evaluate whether to grant or deny the petition. The petition is hereby granted on certain model years. The NCCC letter cites two complaints of stall while driving in MY 2009 Ford Escape vehicles that were diagnosed as failed throttle bodies with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed. The petitioner indicates that the owners of both vehicles reported experiencing repeated incidents of stalling and engine surging. According to Ford, Escape non-hybrid vehicles are equipped with Electronic Throttle Body (ETB) assemblies beginning with MY 2009. Vehicles manufactured between June 22, 2009 and October 15, 2009 may contain contaminated printed circuit boards (PCB) with plating variations. Plating variations could lead to a lack of continuity in the throttle position sensor circuit where P2111 and/or other DTCs would be generated and stored. Ford and its electronic throttle body supplier, Delphi, modified the PCB manufacturing process and issued a technical service bulletin (TSB) 09-23-5. Vehicles produced after October 15, 2009 incorporated ETBs manufactured with a PCB process that resolved this condition. ODI's analysis identified a total of 123 unique reports indicating allegations of reduced motive power or vehicle stall. Depending on the condition of throttle control system malfunction, a driver may experience varying levels of reduced engine performance associated with three limp home modes. In two limp modes, reduced engine performance may maintain vehicle speeds above 20mph while the third is a limited limp home mode with engine speeds limited to approximately 900 RPM. Allegations of stall appear to be related to the limited limp home mode. Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability. Allegations of vehicle surge appear to be related to limp home mode operation. Complaints alleging surge are most likely related to engine RPM fluctuations at low vehicle speeds or idle as the control system engages to prevent engine stall. In limited limp mode, rough-idle conditions may exist while the control system attempts to modulate engine RPMs once the vehicle reaches a reduced speed to maintain approximately 900 RPM. Separately, ODI received 59 complaints alleging incidents of engine stall while driving in model year (MY) 2010-2011 Ford Fusion vehicles. Approximately 60 percent (36) of the incidents occurred at speeds of 40 miles per hour or more. Eighty percent of complaints (47) were received beginning March 2012 and 14 complaints reported that the throttle body was replaced or DTCs associated with limp home modes. Additionally, Ford issued TSB 10-21-6 addressing DTCs associated with idle speed drops and limited limp home mode. The petition is granted on certain model years.Preliminary Evaluation PE13-003 has been opened to assess the scope, frequency and potential safety consequences associated with the alleged defect.See full copy of the closing resume for this defect petition for list of the VOQs associated with the defect petition analysis.
PE08060 · Tire Valve Cracking
Opened Oct 14, 2008 · Closed Apr 9, 2009
Status: closed (inferred from source dates) · Tires:valve
ON OCTOBER 14, 2008, ODI OPENED PE08-060 TO INVESTIGATE ALLEGATIONS OF CRACKED AND LEAKING SNAP-IN TIRE VALVES IN MODEL YEAR (MY) 2007 VEHICLES MANUFACTURED BY FORD MOTOR COMPANY.THE VALVES WERE SUPPLIED TO FORD BY TOPSEAL AUTO-PARTS, A SUBSIDIARY OF THE SHANGHAI BAOLONG AUTOMOTIVE CORPORATION IN CHINA.VALVES MADE BY TOPSEAL FOR AFTERMARKET SALE WERE THE SUBJECT OF TWO RECENT SAFETY RECALLS BY TECH INTERNATIONAL (08T-018) AND DILL AIR CONTROLS (08T-028), THE LATTER OF WHICH WAS INVESTIGATED BY ODI IN PE08-036 AND EA08-022.THE DEFECT CONDITIONS ADDRESSED BY THE AFTERMARKET TIRE VALVE RECALLS BOTH INVOLVED INADEQUATE RESISTANCE TO OZONE CRACKING DUE TO ISSUES WITH THE SUPPLY OF ANTI-OZONANT CHEMICALS TO TOPSEAL FOR A PERIOD FROM JULY TO MID-NOVEMBER 2006.THE AFTERMARKET VALVES WERE COMPOUNDED WITH A BLEND OF EPDM AND NATURAL RUBBER, USING A RELATIVELY LOW PERCENTAGE OF EPDM (EPDM PROVIDES INHERENT RESISTANCE TO OZONE CRACKING).HENCE, THE NEED FOR ANTI-OZONANT CHEMICALS AND THE PROBLEMS WITH CRACKING WHEN THOSE CHEMICALS WERE MISSING OR OUT OF SPECIFICATION IN SOME LOTS OF VALVES.BOTH RECALL CAMPAIGNS INVOLVED INSPECTION PROGRAMS TO IDENTIFY AND REPLACE VALVES WITH VISIBLE SURFACE CRACKING.ALTHOUGH THE TOPSEAL VALVES SUPPLIED TO FORD ALSO APPEAR TO HAVE BEEN AFFECTED BY THE ANTI-OZONANT SUPPLY ISSUES IN MID TO LATE-2006, FORD INDICATED THAT ITS VALVES WERE MADE AT A DIFFERENT TOPSEAL PRODUCTION LINE AND WERE COMPOUNDED WITH A HIGHER PERCENTAGE OF EPDM RUBBER TO MEET MORE STRINGENT SPECIFICATIONS FROM FORD.ODI'S ANALYSIS OF COMPLAINT AND WARRANTY DATA PROVIDED BY FORD SHOWED THAT PROBLEMS WITH CRACKED TIRE VALVES WERE SIGNIFICANTLY HIGHER FOR MY 2007 VEHICLES PRODUCED FROM DECEMBER 2006 THROUGH MARCH 2007.FORD RESPONDED BY IMPLEMENTING CHANGES IN ITS MATERIAL SPECIFICATIONS FOR SNAP-IN RUBBER TIRE VALVES AND ALSO INCREASING THE QUALITY AND ACCEPTANCE STANDARDS FOR VALVES IMPORTED FOR USE IN ITS VEHICLES.WHILE THE COMPLAINT AND WARRANTY CLAIM RATES ARE ELEVATED FOR SUBJECT VEHICLES PRODUCED FROM DECEMBER 2006 THROUGH MARCH 2007, THE RATES OF LEAKING VALVES ARE WELL BELOW ONE PERCENT OF PRODUCTION FOR EACH OF THE PEAK MONTHS FOR ALL OF THE AFFECTED MODELS.A SUBSTANTIAL MAJORITY OF THE SUBJECT VEHICLES ARE EQUIPPED WITH TIRE PRESSURE MONITORING SYSTEMS (TPMS) WHICH WARN THE DRIVER WHEN ANY TIRE PRESSURES DROPS BELOW 25 PERCENT OF RECOMMENDED INFLATION PRESSURE. AS OUTLINED IN A LETTER TO ODI DATED APRIL 6, 2009, FORD HAS AGREED TO SEND LETTERS TO OWNERS OF CERTAIN MY 2007 AND 2008 FORD, LINCOLN AND MERCURY VEHICLES TO PROVIDE INFORMATION ABOUT THE CRACKING CONCERN. LETTERS WILL BE SENT TO OWNERS OF VEHICLES BUILT FROM NOVEMBER 2006 THROUGH MAY 2007.OWNERS CAN OPT FOR A FREE DEALER INSPECTION.VALVES EXHIBITING SURFACE CRACKS OR AIR LEAKAGE RELATED TO OZONE ATTACK WILL BE REPLACED BY FORD UNDER ITS NORMAL WARRANTY TERMS.FORD EXPECTS TO SEND THE LETTER BY APPROXIMATELY MID-MAY 2009. BASED ON THE USE OF TPMS IN THE MAJORITY OF SUBJECT VEHICLES AND THE RELATIVELY LOW RATES OF REPAIRS ASSOCIATED WITH LEAKING VALVES AND RESULTANT TIRE DAMAGE, ODI BELIEVES THAT THE ACTIONS FORD HAS AGREED TO TAKE WILL PROVIDE EFFECTIVE AND EXPEDITIOUS RESOLUTION FOR VEHICLES THAT WERE BUILT DURING THE PERIOD WHEN VALVES WITH INADEQUATE RESISTANCE TO OZONE CRACKING WERE MOST LIKELY TO HAVE BEEN USED IN VEHICLE PRODUCTION.FURTHER INVESTIGATION OF THIS MATTER WOULD NOT BE AN EFFICIENT ALLOCATION OF AGENCY RESOURCES.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST.THE AGENCY WILL CONTINUE TO
Illustration