IllustrationRecall has yet to be repaired despite it being recalled for 7 months and a remedy was supposed to be available two months ago.
2021 Ford Escape Hybrid
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2021 Ford Escape Hybrid do not stand out strongly from the model-year median of 68.
About this comparison →How this year compares
Owner complaints by model year
Compare all Escape Hybrid years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 21 of 122 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Engine. Review the 36 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 32 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 22 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
2 crash reports2 fire reports2 injury reports
What owners actually said
122 reportsMETAL-TO-METAL CLANK TO ENGINE. This is the last incident that occurred while traveling to my job in Richmond, Virginia and back home to Fredericksburg, Virginia on 12/20/23. I traveled a total of 100 miles that day. I have reported this same issue previously 4 times to Sheehy Ford of Ashland in Ashland, Virginia to the Service …
Read full complaint
METAL-TO-METAL CLANK TO ENGINE. This is the last incident that occurred while traveling to my job in Richmond, Virginia and back home to Fredericksburg, Virginia on 12/20/23. I traveled a total of 100 miles that day. I have reported this same issue previously 4 times to Sheehy Ford of Ashland in Ashland, Virginia to the Service Shop Associates where I purchase my vehicle. They told me to continue to drive my vehicle but I explain to them that Ford was suppose to have a remedy by October of 2023 but nothing happened. My car continues to get worse and my 3 year warranty to my vehicle is up in March of 2024. As a consumer I should not have to be put in this position. This is not only unfair but dangerous to travel on the highway. I should of been given a new vehicle and Ford Motor Company should be responsible to not allowing for this to continue. I am respectfully asking you have Ford Motor Company to furnish me a new vehicle or give me an additional 3 year warranty on my vehicle with no additional costs. This burden should not be put onto the consumer and even if they find a remedy there is no guarantee this will resolve the problem. I will be contacting legal counsel and patiently awaiting your response. Thank you.
I am worried that this vehicle's engine could die, proceed to leak oil and fuel and combust, leaving a burning husk that should've been repaired three months ago. The open recall was set to conclude, per Ford, in October 2023. It is now New Year's with no resolution. I do not want to drive a tinderbox.
Day after purchase of car, door was making noise. Took it to location ford dealer only to be told it's the door check welds and it's $3k+ to replace the entire door. It's gotten so bad, I have to force door to shut.
The driver's side door suddenly made a large popping noise when I opened it one day. Since then, it continues to make this noise and sometimes won't close all the way. The driver's side window has also stopped working properly. It will go down just a couple of inches and stop - fortunately, it's been able to go back up but it…
Read full complaint
The driver's side door suddenly made a large popping noise when I opened it one day. Since then, it continues to make this noise and sometimes won't close all the way. The driver's side window has also stopped working properly. It will go down just a couple of inches and stop - fortunately, it's been able to go back up but it seems to struggle so much to close that I just don't use it anymore on the chance that it won't go up at all. I looked online for suggestions and discovered that I am not the only one with this problem. I cannot afford to repair it, so I am just living with it and hope that it will close every time I use it. I am careful to make sure the door seems to be connected on the times it struggles to close properly so that it won't open while I'm driving. I can't use drive thrus anymore as the window doesn't work and the door is risky to close right. I see that an investigation has been opened and I would like to make you aware that I'm having the very same issue.
The drivers door check arm spot welds failed. Ref - PE23013
The contact owns a 2021 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the i…
Read full complaint
The contact owns a 2021 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2021 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The …
Read full complaint
The contact owns a 2021 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
2021 Escape with 61,000 miles and normal use (commuting for work). The Driver door check arm welds have failed causing a crunching noise when opening and closing. Ford dealership says it's not a warranty repair and refuses to fix the problem. There are two SSM/TSBs regarding this problem SSM 51553 and SSM 50150. Problem is causi…
Read full complaint
2021 Escape with 61,000 miles and normal use (commuting for work). The Driver door check arm welds have failed causing a crunching noise when opening and closing. Ford dealership says it's not a warranty repair and refuses to fix the problem. There are two SSM/TSBs regarding this problem SSM 51553 and SSM 50150. Problem is causing the driver window to not operate.
Drivers side front door check arm attachment points separated. Door malfunctioning which renders window inoperable. Ford service indicated only recourse is a replacement of the full door assembly. There was no incident of over opening the door!
Official recalls
122V109000 · Engine And Engine Cooling:engine:hard Parts Internal/mechanical
Feb 24, 2022
Ford Motor Company (Ford) is recalling certain 2021 Escape Hybrid vehicles. The engine crankshaft may have been manufactured incorrectly, which can result in engine damage.
Consequence & remedy
Consequence: Engine damage can cause a vehicle stall or fire, increasing the risk of a crash or injury.
Remedy: Dealers will inspect the crankshaft and replace the engine, as necessary, free of charge. Interim letters notifying owners of the safety risk are expected to be mailed March 2, 2022. Owner notification letters were mailed on March 21, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S10.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2PE23013 · Failed Door Check Arm Attachment Point
Opened Jul 7, 2023 · Closed Jan 24, 2024
Status: closed (inferred from source dates) · Structure:body:door ; Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Structure:body:door
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.