IllustrationLiftgate latch does not work and trunk no longer opens after 55,000 miles. This is one fewer choice to exit the car in an emergency.
2020 Ford Escape Hybrid
Owner reports · Recalls · Investigations
More warning signs than most Escape Hybrid years
Owner complaints for the 2020 Ford Escape Hybrid are substantially higher than the model-year median of 68.
About this comparison →How this year compares
Owner complaints by model year
Compare all Escape Hybrid years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 67 of 288 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Structure. Review the 105 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 64 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 42 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports1 fire reports5 injury reports
What owners actually said
288 reportsWe were traveling to Springfield MO and just before Strafford our 2020 Ford Escape Hybrid SE flashed a wrench warning on our screen and immediately went into limp mode in rush hour traffic on I-44. We were in the passing lane going up a hill at the time passing a commercial truck and our speed dropped significantly. Luckily th…
Read full complaint
We were traveling to Springfield MO and just before Strafford our 2020 Ford Escape Hybrid SE flashed a wrench warning on our screen and immediately went into limp mode in rush hour traffic on I-44. We were in the passing lane going up a hill at the time passing a commercial truck and our speed dropped significantly. Luckily the vehicles behind us to were able slow down in time.
The contact owns a 2020 Ford Escape. The contact stated while the vehicle was parked, the display screen on the instrument panel intermittently went black. No warning light was illuminated. The vehicle was driven to the dealer to be diagnosed. The contact was informed that the sync system needed to be replaced. The vehicle was r…
Read full complaint
The contact owns a 2020 Ford Escape. The contact stated while the vehicle was parked, the display screen on the instrument panel intermittently went black. No warning light was illuminated. The vehicle was driven to the dealer to be diagnosed. The contact was informed that the sync system needed to be replaced. The vehicle was repaired. The contact researched online and became aware of Customer Satisfaction Program Number: 24B47; however, the VIN was not included. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 65,000.
The windshield wipers locked up and would not function.
The contact owns a 2020 Ford Escape Hybrid. The contact stated that the vehicle had been repaired under NHTSA Campaign Number: 23V380000 (Engine). The contact had taken the vehicle to a dealer and stated that the dealer only updated the powertrain control module, and had not inspected the engine. The contact stated that there wa…
Read full complaint
The contact owns a 2020 Ford Escape Hybrid. The contact stated that the vehicle had been repaired under NHTSA Campaign Number: 23V380000 (Engine). The contact had taken the vehicle to a dealer and stated that the dealer only updated the powertrain control module, and had not inspected the engine. The contact stated that there was still a risk of an engine compartment fire. The vehicle was repaired. The manufacturer was not informed of the issue. The failure mileage was approximately 72,000.
The spot weld in the driver’s side door arm has failed. The door is not closing properly and makes a loud clunk when opening or closing. Car is available for inspection, Dealer can not assess for another week.
The contact owns a 2020 Ford Escape. The contact stated while refueling the vehicle at the gas station, fuel was splashing out of the fuel filler neck. The contact stated that upon attempting to refuel the vehicle again, the gas pump nozzle unintendedly stopped several times and fuel splashed onto the contact; however, the fuel …
Read full complaint
The contact owns a 2020 Ford Escape. The contact stated while refueling the vehicle at the gas station, fuel was splashing out of the fuel filler neck. The contact stated that upon attempting to refuel the vehicle again, the gas pump nozzle unintendedly stopped several times and fuel splashed onto the contact; however, the fuel tank was not full. Additionally, the check engine warning light was illuminated. The message "Service Engine Soon" and other unknown messages were displayed on the Ford Mobile App. The vehicle was taken to the dealer, where it was diagnosed and determined that the canister purge valve was blocked and was obstructing the fuel circulation. The dealer determined that the fuel lines, the fuel system valves, and the canister purge valve needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was 43,578.
See attached document for complaint
The round gear nob will not release out of PARK. It happens when it is 105°+. The car starts. Then I put my foot on the break and try to turn round gear shift nob from PARK to REVERSE and the nob will not move. Break lights work. All doors closed. Seatbelt on. I've been sitting in my car for about the last 25 minutes and using …
Read full complaint
The round gear nob will not release out of PARK. It happens when it is 105°+. The car starts. Then I put my foot on the break and try to turn round gear shift nob from PARK to REVERSE and the nob will not move. Break lights work. All doors closed. Seatbelt on. I've been sitting in my car for about the last 25 minutes and using the air conditioner to try to cool down the console, dash and the gear shift knob and everything's nice and cold but I still cannot get the knob to turn. I have also turned off and restarted the engine about three times and still I am stuck here in a parking lot and the car's not going anywhere. This happened a year ago and I brought it into the a Sacramento Ford dealership but because it didn't get hot during their working hours they were not able to replicate the problem. So here I am again and it's after Ford hours and I normally get service at Folsom Lake Ford in California but how am I going to get them to replicate the issue and they say they can't replicate the same problem then how can I get this fixed. Meanwhile I'm stranded in a not so safe area with a lot of homeless people around that are having violent issues.
The contact owns a 2020 Ford Escape. The contact stated that there was extreme moisture inside the driver's side rear taillight housing. There were no warning lights illuminated. The vehicle was taken to the local dealer, who took pictures of the failure. The vehicle was not diagnosed or repaired. The manufacturer was contacted,…
Read full complaint
The contact owns a 2020 Ford Escape. The contact stated that there was extreme moisture inside the driver's side rear taillight housing. There were no warning lights illuminated. The vehicle was taken to the local dealer, who took pictures of the failure. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no additional assistance was provided. The failure mileage was approximately 2,002.
Official recalls
125V881000 · Power Train:automatic Transmission:control Module (tcm/pcm/tecm)
Dec 18, 2025
Ford Motor Company (Ford) is recalling certain 2022-2024 Maverick Hybrid and 2020 Escape Hybrid vehicles. The Hybrid Powertrain Control Module (HPCM) software may cause the vehicle to shift into neutral unexpectedly, causing a loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will update the HPCM software, free of charge. Owner notification letters were mailed February 12, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S33. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 15, 2026. This is an expansion of Recalls 24V330 (24S33) and 25V133 (25S16).
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2PE23013 · Failed Door Check Arm Attachment Point
Opened Jul 7, 2023 · Closed Jan 24, 2024
Status: closed (inferred from source dates) · Structure:body:door ; Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Structure:body:door
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.