NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
884 reports107,400 miles · Apr 17, 2014
Unknown Or OtherVisibility/wiper
IR CONDITIONING COMPRESSOR FAILED AND WAS REPLACED UNDER EXTENDED WARRANTY IN JANUARY 2013. NEW A/C COMPRESSOR INSTALLED, BUT A/C CLUTCH FELL OFF FOURTEEN MONTHS LATER AS I WAS TURNING A CORNER. I WAS TOLD THAT BECAUSE OF THE COMPRESSOR FAILURE, (WHICH ONE WAS NOT REFERENCED) THERE ARE METAL SHAVINGS IN THE A/C COOLANT LINES A…
Read full complaint
IR CONDITIONING COMPRESSOR FAILED AND WAS REPLACED UNDER EXTENDED WARRANTY IN JANUARY 2013. NEW A/C COMPRESSOR INSTALLED, BUT A/C CLUTCH FELL OFF FOURTEEN MONTHS LATER AS I WAS TURNING A CORNER. I WAS TOLD THAT BECAUSE OF THE COMPRESSOR FAILURE, (WHICH ONE WAS NOT REFERENCED) THERE ARE METAL SHAVINGS IN THE A/C COOLANT LINES AND THE ENTIRE SYSTEM NEEDS REPLACEMENT. SERVICE ADVISER STATED THAT HE HAS RECEIVED MULTIPLE COMPLAINTS OF THIS AND THAT I WILL BE UNABLE TO USE VEHICLE DEFROST DUE TO THIS AND IT IS THE SNOWIEST TIME OF THE YEAR. DODGE WILL NOT REPLACE, AS VEHICLE AND PART ARE NOW BOTH OUT OF WARRANTY. REPLACEMENT PART ONLY UNDER WARRANTY FOR 12 MONTHS, BUT HAVE NOT HAD TO ENGAGE EITHER DEFROST OR A/C IN THE PAST 8 MONTHS UNTIL TWO WEEKS AGO, WHEN THE REPLACEMENT FAILED AND THE CLUTCH BROKE OFF. USING THE DEFROST COULD RESULT IN THE UNIT OVERHEATING, CAUSING AN ENGINE FIRE OR OTHER FAILURE.
NHTSA ODI #10583308
83,333 miles · Apr 16, 2014
Unknown Or Other
DROVE HOME FROM WORK AT MIDNIGHT, PARKED MY CAR WOKE UP IN THE MORNING AND VEHICLE WOULDN'T KICK OVER. HAD BATTERY POWER AND IT CRANKED WHEN I TURNED THE KEY BUT WOULD KICK OVER TO START. TOWED TO DEALERSHIP FOR DIAGNOSIS. *TT
NHTSA ODI #10583090
Mileage unknown · Apr 12, 2014
Air BagsElectrical SystemSteering
THE FIRST SIGNS OF A PROBLEM WERE A CLICKING SOUND WHEN TURNING THE STEERING WHEEL. IT DID NOT HAPPEN EVERY TIME, AND I DID NOTHING ABOUT IT UNTIL DECEMBER, WHEN A PORTION OF A STRAP WITH ELECTRICAL WIRE EMBEDDED BEGAN TO PROTRUDE FROM THE UPPER STEERING COLUMN. IT SOON BEGAN TO BE A NUISANCE AS THE PORTION GREW LONGER AND WOU…
Read full complaint
THE FIRST SIGNS OF A PROBLEM WERE A CLICKING SOUND WHEN TURNING THE STEERING WHEEL. IT DID NOT HAPPEN EVERY TIME, AND I DID NOTHING ABOUT IT UNTIL DECEMBER, WHEN A PORTION OF A STRAP WITH ELECTRICAL WIRE EMBEDDED BEGAN TO PROTRUDE FROM THE UPPER STEERING COLUMN. IT SOON BEGAN TO BE A NUISANCE AS THE PORTION GREW LONGER AND WOULD CATCH ON THE STEERING POSITION ADJUSTMENT KNOB. I GREW ALARMED WHEN THE AIRBAG LIGHT CAME ON, AND TOOK IT TO THE DEALERSHIP. THEY SAID IT WAS A BROKEN CLOCKSPRING, AND THEY HAD TO ORDER THE PART. IT COST ME OVER $300 TO GET THIS REPAIRED, AND NOW I SEE TOYOTA IS DOING A RECALL FOR THIS EXACT SAME THING, A SPIRAL CABLE ASSEMBLY THAT BECOMES DAMAGED FROM TURNING THE STEERING WHEEL. IT IS A POOR DESIGN. TOYOTA IS REPLACING THIS WITH A BETTER PART, BUT I DO NOT THINK DODGE DID THAT, AND I HAD TO PAY TO GET THIS REPLACED. I AM CONCERNED IT COULD HAPPEN AGAIN, AND BELIEVE THERE SHOULD BE A RECALL BY DODGE ALSO. *JS
NHTSA ODI #10579324
100,000 miles · Apr 11, 2014
Structure
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE FRONT AND REAR OF THE SUB FRAME WAS RUSTED. THE VEHICLE WAS TAKEN TO A PRIVATE MECHANIC WHO CONFIRMED THE FAILURE. THE MANUFACTURER WAS NOTIFIED OF THE ISSUE. THE APPROXIMATE FAILURE MILEAGE WAS 100,000.
NHTSA ODI #10579167
Mileage unknown · Apr 9, 2014
Vehicle Speed Control
WHILE ACCELERATING ON THE HIGHWAY ON-RAMP, THE ACCELERATOR PEDAL STUCK AND THE VEHICLE CONTINUED ACCELERATING IN SPITE OF THE BRAKES BEING APPLIED. I WAS ONLY ABLE TO STOP THE VEHICLE AFTER TURNING OFF THE IGNITION WHILE THE VEHICLE WAS STILL IN MOTION. THERE WAS A RECALL PERFORMED ON THIS VEHICLE IN 2010 TO PREVENT A STICKY ACC…
Read full complaint
WHILE ACCELERATING ON THE HIGHWAY ON-RAMP, THE ACCELERATOR PEDAL STUCK AND THE VEHICLE CONTINUED ACCELERATING IN SPITE OF THE BRAKES BEING APPLIED. I WAS ONLY ABLE TO STOP THE VEHICLE AFTER TURNING OFF THE IGNITION WHILE THE VEHICLE WAS STILL IN MOTION. THERE WAS A RECALL PERFORMED ON THIS VEHICLE IN 2010 TO PREVENT A STICKY ACCELERATOR PEDAL, BUT APPARENTLY THE SAME ISSUE THE RECALL WAS INTENDED TO PREVENT STILL EXISTS TODAY. *TR
NHTSA ODI #10578666
Mileage unknown · Apr 8, 2014
Fuel System, GasolineService Brakes
WHEN DRIVING ON HIGHWAY CAR LOOSES POWER BRAKE LIGHT COMES ON AND OFF DEALER STATES IT'S NOTHING GET OIL CHANGE FROM DEALER STATED NOTHING IS WRONG. *TR
NHTSA ODI #10578173
115,000 miles · Apr 3, 2014
Electrical System
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED WHILE DRIVING VARIOUS SPEEDS THE DRIVERS SIDE HEADLIGHT FAILED. THE CONTACT MENTIONED THAT THE FAILURE OCCURRED INTERMITTENTLY. THE VEHICLE WAS TAKEN TO A PRIVATE MECHANIC WHO DIAGNOSED THAT THE ENTIRE COMPUTER NEEDED TO BE RESET. THE MANUFACTURER WAS NOTIFIED OF THE …
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED WHILE DRIVING VARIOUS SPEEDS THE DRIVERS SIDE HEADLIGHT FAILED. THE CONTACT MENTIONED THAT THE FAILURE OCCURRED INTERMITTENTLY. THE VEHICLE WAS TAKEN TO A PRIVATE MECHANIC WHO DIAGNOSED THAT THE ENTIRE COMPUTER NEEDED TO BE RESET. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 115,000 AND THE CURRENT MILEAGE WAS 117,000.
NHTSA ODI #10577109
85,000 miles · Mar 28, 2014
Structure
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE HAVING MAINTENANCE PERFORMED, HE WAS NOTIFIED THAT THE ENGINE CRADLE WAS COMPLETELY CORRODED. THE VEHICLE WAS NOT TAKEN TO THE DEALER. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE AND CURRENT MILEAGE WAS 85,000.…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE HAVING MAINTENANCE PERFORMED, HE WAS NOTIFIED THAT THE ENGINE CRADLE WAS COMPLETELY CORRODED. THE VEHICLE WAS NOT TAKEN TO THE DEALER. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE AND CURRENT MILEAGE WAS 85,000.
NHTSA ODI #10575403
120,000 miles · Mar 27, 2014
EngineStructure
I WAS TOLD BY MEINEKE THAT MY ENGINE'S SUBFRAME WAS SO CORRODED THAT THE CAR WAS UNSAFE TO DRIVE. THE MECHANIC TOLD ME THAT IT WAS VERY UNUSUAL FOR A CAR THIS YOUNG TO HAVE A CORRODED SUBFRAME. I LEARNED FROM ONLINE RESEARCH THAT CORRODED SUBFRAMES ARE A FREQUENT COMPLAINT WITH DODGE CALIBERS, POSSIBLY BECAUSE OF THE PLACEMENT…
Read full complaint
I WAS TOLD BY MEINEKE THAT MY ENGINE'S SUBFRAME WAS SO CORRODED THAT THE CAR WAS UNSAFE TO DRIVE. THE MECHANIC TOLD ME THAT IT WAS VERY UNUSUAL FOR A CAR THIS YOUNG TO HAVE A CORRODED SUBFRAME. I LEARNED FROM ONLINE RESEARCH THAT CORRODED SUBFRAMES ARE A FREQUENT COMPLAINT WITH DODGE CALIBERS, POSSIBLY BECAUSE OF THE PLACEMENT OF THE AIR CONDITIONING UNIT. THERE WAS NO RECALL. I IMMEDIATELY REPLACED THE SUBFRAME AT A COST OF APPROXIMATELY $1,000. *TR
NHTSA ODI #10575194
79,389 miles · Mar 27, 2014
Engine And Engine CoolingVehicle Speed Control
DRIVING AT 35 MPH, CAR SUDDENLY LOST POWER AND LIGHTNING SYMBOL APPEARED ON DASH. DROVE IT HOME ON SIDE STREETS AT VERY LOW SPEED (WOULD NOT ACCELERATE PAST 10-15 MPH) PUT A CODE READER ON THE CAR AND CAME UP WITH CODE P2119. THIS IS A VERY DANGEROUS SITUATION, AND COULD VERY EASILY CAUSE AN ACCIDENT THAT COULD RESULT IN A F…
Read full complaint
DRIVING AT 35 MPH, CAR SUDDENLY LOST POWER AND LIGHTNING SYMBOL APPEARED ON DASH. DROVE IT HOME ON SIDE STREETS AT VERY LOW SPEED (WOULD NOT ACCELERATE PAST 10-15 MPH) PUT A CODE READER ON THE CAR AND CAME UP WITH CODE P2119. THIS IS A VERY DANGEROUS SITUATION, AND COULD VERY EASILY CAUSE AN ACCIDENT THAT COULD RESULT IN A FATALITY. *TR
NHTSA ODI #10575099
Official recalls
4Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
Illustration