NHTSA owner reports · September 18, 2026 snapshot.
Suspension complaints
255 reportsClear category filter98,000 miles · Oct 16, 2017
Suspension
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING 30 MPH, AN ABNORMAL CRUNCHING NOISE WAS HEARD. ADDITIONALLY, WHILE HAVING THE VEHICLE SERVICED, THE CONTACT WAS NOTIFIED THAT THE ENGINE CRADLE/CROSS MEMBER WAS RUSTED. THE VEHICLE WAS TAKEN TO A LOCAL DEALER (BRYDEN MOTORS, 548 BROAD ST BELOIT, WI 53511) WHERE IT WAS DIA…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING 30 MPH, AN ABNORMAL CRUNCHING NOISE WAS HEARD. ADDITIONALLY, WHILE HAVING THE VEHICLE SERVICED, THE CONTACT WAS NOTIFIED THAT THE ENGINE CRADLE/CROSS MEMBER WAS RUSTED. THE VEHICLE WAS TAKEN TO A LOCAL DEALER (BRYDEN MOTORS, 548 BROAD ST BELOIT, WI 53511) WHERE IT WAS DIAGNOSED THAT THE CROSS MEMBER NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOTIFIED OF THE ISSUE AND OPENED CASE NUMBER: 32546272. THE CONTACT WAS INFORMED THAT THE VEHICLE WAS NO LONGER COVERED UNDER THE EXTENDED WARRANTY. NO FURTHER ASSISTANCE WAS OFFERED. THE FAILURE MILEAGE WAS 98,000.
NHTSA ODI #11033880
98,000 miles · Oct 16, 2017
Suspension
FRONT CROSS MEMBER ROTTED/ VEHICLE DEEMED NOT SAFE TO DRIVE. CHRYSLER SAID EXTENDED WARRANTY ENDED 5-29-2017. THE REST OF THE UNDERSIDE OF THE CAR IS NOT SHOWING SIGNS OF RUST, ONLY THE ENGINE CRADLE/ CROSS MEMBER. I BELIEVE THE COMPANY NEEDS TO STEP FORWARD AND TAKE CARE OF THIS ISSUE BEFORE ANY PARTIES ARE FATALLY INJURED.
NHTSA ODI #11033878
155,000 miles · Oct 13, 2017
StructureSuspension
HAVE OWNED CALIBER FOR 8 OR 9 YEARS. FEW WEEKS AGO, CAR STARTED SHAKING WHEN IN MOTION AND QUICKLY BECAME SEVERE SHAKING AND MAKING LOUD GROANING SOUNDS NO MATTER HOW FAST WE DROVE IT. TOOK THE CAR TO MECHANIC WHO ADVISED SUBFRAME WAS COMPLETELY RUSTED OUT. DEALERSHIP ADVISED OUR WARRANTY ENDED APRIL 2017 FOR A RUST PROBLEM WE …
Read full complaint
HAVE OWNED CALIBER FOR 8 OR 9 YEARS. FEW WEEKS AGO, CAR STARTED SHAKING WHEN IN MOTION AND QUICKLY BECAME SEVERE SHAKING AND MAKING LOUD GROANING SOUNDS NO MATTER HOW FAST WE DROVE IT. TOOK THE CAR TO MECHANIC WHO ADVISED SUBFRAME WAS COMPLETELY RUSTED OUT. DEALERSHIP ADVISED OUR WARRANTY ENDED APRIL 2017 FOR A RUST PROBLEM WE WERE NEVER NOTIFIED OF. DODGE CSR SAID THEY NOTIFIED THE ORIGINAL OWNER VS A CURRENT VIN OWNER WHICH IS TOTAL BS.
NHTSA ODI #11033259
137,889 miles · Sep 10, 2017
SteeringSuspensionUnknown Or Other
TOOK CAR IN FOR INSPECTION AND WAS TOLD BY MECHANIC THAT THE FRAME WAS SHOT, TOTALLY RUSTED OUT AND COULD BREAK ANYTIME.
NHTSA ODI #11022557
140,000 miles · Aug 31, 2017
StructureSuspension
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE THE VEHICLE WAS UNDERGOING AN OIL CHANGE, THE LOCAL DEALER (ZEIGLER CHRYSLER DODGE JEEP RAM, 4200 PARKWAY PLACE SW, GRANDVILLE, MI 49418) DISCOVERED THAT THE REAR CROSSMEMBER AND FRONT ENGINE CRADLE UNDER THE VEHICLE WERE EXTREMELY CORRODED AND NEEDED TO BE REPLACED. THE VEHICLE W…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE THE VEHICLE WAS UNDERGOING AN OIL CHANGE, THE LOCAL DEALER (ZEIGLER CHRYSLER DODGE JEEP RAM, 4200 PARKWAY PLACE SW, GRANDVILLE, MI 49418) DISCOVERED THAT THE REAR CROSSMEMBER AND FRONT ENGINE CRADLE UNDER THE VEHICLE WERE EXTREMELY CORRODED AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE CONTACT WAS INFORMED THAT THE VEHICLE WAS ORIGINALLY REGISTERED IN CANADA AND THE WARRANTY AND RECALLS EXPIRED ONCE THE VEHICLE WAS IMPORTED. THE MANUFACTURER WAS NOTIFIED AND INFORMED THE CONTACT THAT NO RECALL WAS AVAILABLE FOR THE VEHICLE. THE FAILURE MILEAGE WAS APPROXIMATELY 140,000.
NHTSA ODI #11020760
101,000 miles · Aug 22, 2017
SteeringSuspension
I WAS DRIVING MY VEHICLE ON OUR COUNTY ROAD, AND LOST CONTROL BECAUSE THE CAR QUICKLY AND SHARPLY VEERED OFF TO THE RIGHT TOWARDS THE DITCH. THE CAUSE IS THE SUB FRAME ASSEMBLY WAS BADLY CORRODED AND THE CONTROL ARM ASSEMBLY BROKE FREE FROM OF THE FRAME. WE HAD THE VEHICLE INSPECTED ON A RECALL TWO YEARS AGO TO BE CHECKED FO…
Read full complaint
I WAS DRIVING MY VEHICLE ON OUR COUNTY ROAD, AND LOST CONTROL BECAUSE THE CAR QUICKLY AND SHARPLY VEERED OFF TO THE RIGHT TOWARDS THE DITCH. THE CAUSE IS THE SUB FRAME ASSEMBLY WAS BADLY CORRODED AND THE CONTROL ARM ASSEMBLY BROKE FREE FROM OF THE FRAME. WE HAD THE VEHICLE INSPECTED ON A RECALL TWO YEARS AGO TO BE CHECKED FOR A CORRODED CROSSMEMBER. WE WERE NOT INFORMED OF ANY PROBLEM DOWN THEN WITH THE SUB FRAME. IT WAS VERY FRIGHTENING, AND HAD I BEEN GOING FASTER I DON'T KNOW IF I'D BE HERE TODAY. IT'S IN THE REPAIR SHOP NOW. THIS OCCURRED TODAY, AUGUST 22, 2017.
NHTSA ODI #11018999
Mileage unknown · Aug 17, 2017
Suspension
I HAD TO SPEND 800,00 TO FIX THE CAR BECAUSE THE RECALL EXPIRED IN FEB 2017
NHTSA ODI #11016079
Mileage unknown · Aug 17, 2017
Suspension
WE HEARD THERE WAS A RECALL ON THE CROSS MEMBERS SO MY WIFE CALLED THE DODGE DEALERSHIP IN STERLING HEIGHTS MICHIGAN. THEY TOLD HER THERE WAS NOT. SHE CALLED REPEATEDLY AND GOT THE SAME ANSWER. THE PEOPLE THERE ARE QUITE RUDE, IF YOU DO NOT BELIEVE ME CALL FOR YOURSELF. FINALLY, SHE CALLED AGAIN AND THE PERSON THERE TOLD HER THE…
Read full complaint
WE HEARD THERE WAS A RECALL ON THE CROSS MEMBERS SO MY WIFE CALLED THE DODGE DEALERSHIP IN STERLING HEIGHTS MICHIGAN. THEY TOLD HER THERE WAS NOT. SHE CALLED REPEATEDLY AND GOT THE SAME ANSWER. THE PEOPLE THERE ARE QUITE RUDE, IF YOU DO NOT BELIEVE ME CALL FOR YOURSELF. FINALLY, SHE CALLED AGAIN AND THE PERSON THERE TOLD HER THE PROBLEM WASN'T CALLED A RECALL. SHE SAID OK, WHAT IS IT AND HOW DO WE FIX IT. THEY TOLD HER WHAT IT WAS CALLED AND THAT THE TIME FOR THEM TO FIX IT EXPIRED THE PRIOR MONTH. WE ASSUMED IT WASN'T A BIG DEAL SO WE FORGOT ABOUT IT. UNTIL MY MOTHER, SISTER, AND BROTHER IN LAW HAD TO HAVE THEIRS FIXED. SO I CALLED AND ASKED IF THEY COULD HELP ONLY TO BE TOLD YOUR OUT OF LUCK, TIME HAS EXPIRED. IF THERE IS A SAFETY PROBLEM WITH A CAR WHY SHOULD IT MATTER IF I KNOW THE MAGIC WORD ITS CALLED? IF THEIR IS A PROBLEM WITH THE CROSS MEMBERS SHOULDN'T THEY KNOW WHAT ITS CALLED? IT SEEMS VERY DISHONEST AND WHEN I LEARNED WHAT A CROSS MEMBER WAS I WAS VERY DISTRESSED TO KNOW MY WIFE IF DRIVING THE CAR. IF THIS IS HOW THEY OPERATE I HOPE SOMEONE TAKES A CLOSER LOOK AT THEM BEFORE SOMEONE GETS HURT!
NHTSA ODI #11015981
113,607 miles · Jun 30, 2017
Electronic Stability Control (esc)SteeringSuspension
THE FRONT END MAKES ALL KINDS OF NOISES. LOCKS DONT WORK CANT OPEN TRUNK.HEAD LIGHTS WORK WHEN THEY WANT TO.
NHTSA ODI #11002476
75,016 miles · May 8, 2017
SteeringSuspensionUnknown Or Other
THOUGHT I HAD A LOOSE BELT CALLED DEALERSHIP WHERE I BOUGHT CAR TOLD TO DODGE DEALERSHIP I DID THAT $90.00 SERVICE FEE SAID I NEEDED NEW ALTERNATOR $1,086.00, I COULD NOT AFFORD THAT TOOK IT TO AMERICA'S THEY SAID FOR $615.00 REPLACE THEN THEY CALLED AND SAID NEED ALL NEW TIE RODS WELL THAT WOULD BRING IT TO $1077.00. I COULD O…
Read full complaint
THOUGHT I HAD A LOOSE BELT CALLED DEALERSHIP WHERE I BOUGHT CAR TOLD TO DODGE DEALERSHIP I DID THAT $90.00 SERVICE FEE SAID I NEEDED NEW ALTERNATOR $1,086.00, I COULD NOT AFFORD THAT TOOK IT TO AMERICA'S THEY SAID FOR $615.00 REPLACE THEN THEY CALLED AND SAID NEED ALL NEW TIE RODS WELL THAT WOULD BRING IT TO $1077.00. I COULD ONLY GET A LOAN FOR $1,000.00 SO THE TIE RODS I CANNOT GET. AFTER THE DODGE DEALERSHIP HAD MY CAR WHEN THEY GAVE IT BACK TO ME THAT CAR WAS RUNNING SO BAD AND SHAKING WHICH IT NEVER DID. I BOUGHT THE CAR I HAD 70,000 THAT WAS 3 1/2 YEARS AGO NOW I ONLY $75,000 MILES ON CAR. MY CAR ALWAYS RAN SMOOTH ON HIGHWAYS AND CITY STREETS . THERE WAS JUST A NOISE ON MY CAR. THE CAR RAN GREAT. PEOPLE COULD HEAR THE NOISE ALSO AS I AM DEAF SO I COULD BARELY HEAR NOISE WITH MY HEARING AID ON. I HAD THE CAR INSPECTED JUST A FEW MONTHS AGO AND PASSED INSPECTION THEY DROVE THE CAR.
NHTSA ODI #10984315
Official recalls
4Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
Illustration