NHTSA owner reports · September 18, 2026 snapshot.
Structure complaints
158 reportsClear category filter88,000 miles · Feb 21, 2017
Structure
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING VARIOUS SPEEDS, AN ABNORMAL NOISE WAS OBSERVED IN THE VEHICLE. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE SUBFRAME FAILED AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILUR…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING VARIOUS SPEEDS, AN ABNORMAL NOISE WAS OBSERVED IN THE VEHICLE. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE SUBFRAME FAILED AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 88,000.
NHTSA ODI #10956126
186,624 miles · Feb 10, 2017
Structure
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE AT AN INDEPENDENT MECHANIC FOR ROUTINE SERVICE, THE TECHNICIAN NOTICED THAT THE ENTIRE SUBFRAME WAS RUSTED THROUGH. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 186,624.
NHTSA ODI #10953913
124,000 miles · Jan 23, 2017
SteeringStructureSuspension
WHERE DO I START! FROM DAY ONE WE HAVE HAD ISSUES WITH THIS CAR. CRUSE CONTROL DIDN'T WORK, BROUGHT BACK TO DEALER THE FIRST WEEK TO BE FIXED. ONE MONTH LATER, FRONT SPEAKER WENT OUT, ANOTHER TRIP TO THE DEALER SPEAKER WAS REPLACED. AT 34,611 MILES, CAR WAS STUCK IN PARK, WOULD NOT SHIFT AT ALL. TOWED TO DEALER, REPLACED STOP LA…
Read full complaint
WHERE DO I START! FROM DAY ONE WE HAVE HAD ISSUES WITH THIS CAR. CRUSE CONTROL DIDN'T WORK, BROUGHT BACK TO DEALER THE FIRST WEEK TO BE FIXED. ONE MONTH LATER, FRONT SPEAKER WENT OUT, ANOTHER TRIP TO THE DEALER SPEAKER WAS REPLACED. AT 34,611 MILES, CAR WAS STUCK IN PARK, WOULD NOT SHIFT AT ALL. TOWED TO DEALER, REPLACED STOP LAMP. AT 35,031 MILES, FRONT END MAKING LOUD KNOCKING NOISE, YOU GUESSED IT, ANOTHER TRIP TO DODGE, LOWER CONTROL ARMS REPLACED. SKIPPING TO JANUARY OF 2017, CAR NOW HAS 124,000 MILES LOUD CRUNCHING SOUND COMING FROM FRONT DRIVER SIDE. THOUGHT OH, ANOTHER BALL JOINT NEEDS REPLACING, WHICH HAS BEEN REPLACED IN JANUARY OF 2016, ALONG WITH MORE CONTROL ARMS, SWAY BAR LINK, AND STRUTS, ABOUT $1200.00 IN ALL. TOOK THIS PILE OF CRAP TO LOCAL MERLIN'S SHOP, SHOWED ME THE ROTTED CROSS MEMBER WITH LARGE HOLES IN IT, COMPLETELY ROTTED THROUGH, BACK CROSS MEMBER WAS IN BAD SHAPE AS WELL. ABSOLUTELY DISGUSTED WITH THIS CAR, TRADED IT IN FOR A 2011 CHEVY AND GOT $ 500.00 WHICH WAS PRETTY GENEROUS. HOW COULD DODGE NOT RECALL THIS ISSUE, MY WIFE WOULD DRIVE THIS 5 DAYS A WEEK 40 MILES A DAY ON THE HIGHWAY, LUCKY SHE COULD OF BEEN INJURED OR WORSE, SHE ALWAYS SAID THE FRONT END WAS NOT RIGHT, THIS HAS BEEN RUSTING OUT FOR YEARS. I GUESS SAFETY IS NOT A PRIORITY WITH THEIR CUSTOMERS, THEY NEVER SENT ANY WARNING OUT TO HAVE THIS CHECKED OUT. I WILL NEVER EVER BUY ANOTHER CHRYSLER/DODGE OR JEEP PRODUCT.
NHTSA ODI #10947254
134,000 miles · Jan 16, 2017
StructureSuspensionUnknown Or Other
CROSSMEMBERS FRONT AND REAR SUBFRAME ARE RUSTED THROUGH AND PERFORATED. DAMAGING FRONT END PARTS BY INSTABILITY...CAR UNSAFE TO DRIVE. CAR JUST PURCHASED FROM UNSAVORY CAR DEALER...
NHTSA ODI #10945508
80,000 miles · Jan 14, 2017
Air BagsStructureCrashInjury
MY HUSBAND WAS DRIVING AND I WAS THE PASSENGER. 12/23/15. THE CAR WAS A 2007 DODGE CALIBER. APPROX 80,000 MILES ON IT. NO PRIOR ACCIDENTS. A CAR TURNED INTO DRIVER SIDE. MY HUSBAND WAS NOT HURT. BOTH CARS GOING APPROX 10 MILES AN HOUR. I WAS HIT WITH AIR BAG. I RECEIVED A BROKEN RIB, NEW BRIDGE COMPLETELY KNOCKED OUT(OR SHOULD I…
Read full complaint
MY HUSBAND WAS DRIVING AND I WAS THE PASSENGER. 12/23/15. THE CAR WAS A 2007 DODGE CALIBER. APPROX 80,000 MILES ON IT. NO PRIOR ACCIDENTS. A CAR TURNED INTO DRIVER SIDE. MY HUSBAND WAS NOT HURT. BOTH CARS GOING APPROX 10 MILES AN HOUR. I WAS HIT WITH AIR BAG. I RECEIVED A BROKEN RIB, NEW BRIDGE COMPLETELY KNOCKED OUT(OR SHOULD I SAY IN.). MY BACK, NECK, ANKLE STILL GIVE ME A LOT OF PAIN TODAY. MY BODY BRUISED HEAD TO TOE. CONCUSSION.
NHTSA ODI #10945342
85,000 miles · Dec 13, 2016
Structure
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE FRONT SUB-FRAME HAD EXPERIENCED SEVERE CORROSION. THE CONTACT STATED THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE FRAME WAS CORRODED AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEA…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE FRONT SUB-FRAME HAD EXPERIENCED SEVERE CORROSION. THE CONTACT STATED THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE FRAME WAS CORRODED AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 85,000.
NHTSA ODI #10934965
130,000 miles · Dec 9, 2016
StructureSuspension
THE CROSSMEMBER IS RUSTED AND HAS A HUGE WHOLE IN IT. I GET REGULAR OIL CHANGES AT THE DODGE DEALER, WITH NO MENTION OF THE CROSSMEMBER ISSUE. STARTED HEARING NOISE IN FRONT END TOOK TO MECHANIC AND INFORMED OF ISSUE. AFTER SOME RESEARCH FOUND 10 YEAR EXTENSION OF WARRENTY ON THIS PART. WENT TO GET REPLACED AND FOUND OTHER S…
Read full complaint
THE CROSSMEMBER IS RUSTED AND HAS A HUGE WHOLE IN IT. I GET REGULAR OIL CHANGES AT THE DODGE DEALER, WITH NO MENTION OF THE CROSSMEMBER ISSUE. STARTED HEARING NOISE IN FRONT END TOOK TO MECHANIC AND INFORMED OF ISSUE. AFTER SOME RESEARCH FOUND 10 YEAR EXTENSION OF WARRENTY ON THIS PART. WENT TO GET REPLACED AND FOUND OTHER SUSPENSION ISSUES CAUSED BY THE SEVERE RUST, WHICH THEY WILL NOT COVER. VEHICLE NOT SAFE TO DRIVE AND THE COST FOR US TO FIX IS MORE THAN THE WORTH OF THE CAR!! AT THIS POINT HAVE NO TRADE IN VALUE FOR CAR...
NHTSA ODI #10934073
162,000 miles · Nov 15, 2016
Electrical SystemStructureWheelsFire
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING 40 MPH, THE SUBFRAME FRACTURED ON THE VEHICLE. IN ADDITION, THE CONTACT REPLACED THE TIRES ON THREE OCCASIONS AND THE REAR WHEEL BEARINGS WERE REPLACED THREE TIMES. FURTHERMORE, THE IGNITION SWITCH CAUGHT FIRE. THE CONTACT EXTINGUISHED THE FIRE. THE VEHICLE WAS TOWED AND R…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING 40 MPH, THE SUBFRAME FRACTURED ON THE VEHICLE. IN ADDITION, THE CONTACT REPLACED THE TIRES ON THREE OCCASIONS AND THE REAR WHEEL BEARINGS WERE REPLACED THREE TIMES. FURTHERMORE, THE IGNITION SWITCH CAUGHT FIRE. THE CONTACT EXTINGUISHED THE FIRE. THE VEHICLE WAS TOWED AND REPAIRED BY A DEALER AND AN INDEPENDENT MECHANIC. THE MANUFACTURER WAS NOT MADE AWARE OF THE ISSUE. THE FAILURE MILEAGE WAS 162,000.
NHTSA ODI #10926211
124,680 miles · Oct 18, 2016
Structure
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE K FRAME PREMATURELY RUSTED WITH EXTENSIVE CORROSION AND THERE WAS A NOISE WHEN TURNING COMING FROM THE LOWER FRONT OF THE VEHICLE. THE CONTACT STATED THAT THERE WAS RUST ON THE WHEEL FRAME NEAR THE DRIVERS SIDE TIRE WHEEL FRAMING AS WELL. THE VEHICLE WAS NOT …
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE K FRAME PREMATURELY RUSTED WITH EXTENSIVE CORROSION AND THERE WAS A NOISE WHEN TURNING COMING FROM THE LOWER FRONT OF THE VEHICLE. THE CONTACT STATED THAT THERE WAS RUST ON THE WHEEL FRAME NEAR THE DRIVERS SIDE TIRE WHEEL FRAMING AS WELL. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 124,680.
NHTSA ODI #10916805
Mileage unknown · Oct 5, 2016
Structure
EXTENSIVE CORROSION FRONT AND REAR CROSS FRAME MEMBRANE. MAKING VEHICLE DANGEROUS TO DRIVE. DODGE KNEW OF THE PROBLEM AND EXTENDED THE WARRANTY BUT DID NOT INFORM ALL OWNERS.
NHTSA ODI #10914091
Official recalls
4Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
Illustration