TL* THE CONTACT'S DAUGHTER OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT UPON HIS DAUGHTER TAKING THE VEHICLE TO AN INDEPENDENT MECHANIC, SHE WAS INFORMED THAT THE ENGINE CRADLE HAD BEGAN TO RUST UNDERNEATH THE SUBFRAME. DUE TO THE FAILURE, SEVERAL HOLES WERE FORMED WITHIN THE ENGINE CRADLE. THE CONTACT THEN NOTIFIED THE MA…
Read full complaint
TL* THE CONTACT'S DAUGHTER OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT UPON HIS DAUGHTER TAKING THE VEHICLE TO AN INDEPENDENT MECHANIC, SHE WAS INFORMED THAT THE ENGINE CRADLE HAD BEGAN TO RUST UNDERNEATH THE SUBFRAME. DUE TO THE FAILURE, SEVERAL HOLES WERE FORMED WITHIN THE ENGINE CRADLE. THE CONTACT THEN NOTIFIED THE MANUFACTURER OF THE FAILURE AND WAS INFORMED THAT THE VEHICLE WAS NEVER ADDED TO THE MANUFACTURER RECALL LIST FOR THE FAILURE. THE MANUFACTURER OFFERED NO FURTHER ASSISTANCE. THE DEALER HAD YET TO BE NOTIFIED OF THE FAILURE. THE VEHICLE HAD YET TO BE REPAIRED. THE FAILURE MILEAGE WAS APPROXIMATELY 100,000.
NHTSA ODI #11383891
85,000 miles · Nov 10, 2020
StructureCrash
FRONT SUBFRAME FAILURE DUE TO PREMATURE CORROSION CAUSED LOSS OF CONTROL OF VEHICLE WHICH COULD HAVE LED TO AN ACCIDENT INVOLVING SERIOUS INJURY OR DEATH A SIT HAPPENED WHILE TURNING LEFT ONTO THE HIGHWAY AND SUBSEQUENTLY THE FAILURE CAUSE DAMAGE TO THE FRONT AXLE
NHTSA ODI #11374044
165,000 miles · Oct 12, 2020
Structure
MY FRONT CARRIAGE THAT HOLDS UP THE ENGINE AND TIRE ALIGNMENT OUTSIDE SHELL RUSTING OUT ON THE BACK SIDE.
NHTSA ODI #11363859
136,000 miles · Jul 22, 2020
SteeringStructureSuspension
I I HAVE CHANGED MULTIPLE TIMES THE SWAY BAR LINKS AND HAD TO PUT ON NEW STRUTS TWICE. THERE WAS SUPPOSED TO BE A RECALL ON THE CROSS MEMBER BAR AND WHEN I TOOK IT TO BE FIXED THE DEALER WOULD NOT HONOR THE RECALL ON THE BAR. IT IS NOW MAKING ONCE AGAIN A POPPING SOUND IN THE FRONT DRIVERS SIDE AND I AM WANTING TO ONCE AGAIN GE…
Read full complaint
I I HAVE CHANGED MULTIPLE TIMES THE SWAY BAR LINKS AND HAD TO PUT ON NEW STRUTS TWICE. THERE WAS SUPPOSED TO BE A RECALL ON THE CROSS MEMBER BAR AND WHEN I TOOK IT TO BE FIXED THE DEALER WOULD NOT HONOR THE RECALL ON THE BAR. IT IS NOW MAKING ONCE AGAIN A POPPING SOUND IN THE FRONT DRIVERS SIDE AND I AM WANTING TO ONCE AGAIN GET THE RECALL ON THE CAR THAT WAS SUPPOSED TO BE FIXED BEFORE.
NHTSA ODI #11341003
50,000 miles · Jun 26, 2020
Structure
THE VEHICLES SUBFRAME WAS ALL ROTTED AND DRIVERS SIDE TIRE PRACTICALLY FELL OFF WHILE IT WAS BEING DRIVEN. CONTACTED DODGE AND THEY SAID BECAUSE THERE WASN'T AN OPEN RECALL THERE WAS NOTHING THEY COULD DO ABOUT IT. MY QUESTION IS WAS THERE A RECALL ON MY PARTICULAR VEHICLE IF SO WHEN/WHERE WAS IT FIXED. WE BOUGHT THIS USED AN…
Read full complaint
THE VEHICLES SUBFRAME WAS ALL ROTTED AND DRIVERS SIDE TIRE PRACTICALLY FELL OFF WHILE IT WAS BEING DRIVEN. CONTACTED DODGE AND THEY SAID BECAUSE THERE WASN'T AN OPEN RECALL THERE WAS NOTHING THEY COULD DO ABOUT IT. MY QUESTION IS WAS THERE A RECALL ON MY PARTICULAR VEHICLE IF SO WHEN/WHERE WAS IT FIXED. WE BOUGHT THIS USED AND HAVE NO PRIOR INFORMATION ON IT. IF THIS VEHICLE WASN'T INCLUDED ON PREVIOUS RECALLS IT SHOULD HAVE BEEN AND THEY SHOULD FIX IT NOW. *TR
NHTSA ODI #11331100
150,000 miles · May 18, 2020
StructureSuspension
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT APPROXIMATELY 55 MPH, THERE WAS AN ABNORMAL TICKING NOISE. IN ADDITION, WHILE EXITING THE HIGHWAY THE FRONT AXLE FRACTURED. THE VEHICLE WAS TOWED TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE FRAME AND FRONT OF THE VEHICLE WAS RUSTED…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT APPROXIMATELY 55 MPH, THERE WAS AN ABNORMAL TICKING NOISE. IN ADDITION, WHILE EXITING THE HIGHWAY THE FRONT AXLE FRACTURED. THE VEHICLE WAS TOWED TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE FRAME AND FRONT OF THE VEHICLE WAS RUSTED. THE VEHICLE WAS TOWED TO MIDWAY DODGE (4747 S PULASKI RD, CHICAGO, IL 60632, (773) 376-8060) WHERE THE DIAGNOSIS WAS CONFIRMED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 150,000.
NHTSA ODI #11324933
85,000 miles · Mar 22, 2020
StructureSuspension
COMMON SUBFRAME CORROSION ON LOW MILEAGE 2007 VEHICLES CAUSING EXTREME SAFETY ISSUES WHILE DRIVING. WAS WARNED BY AUTO SHOP THAT THIS IS COMMON AND RENDERS SAFETY ISSUES TO DRIVER AS ENTIRE ENGINE COULD DROP WHEN DRIVING OR WHEEL SEPARATION, THAT COULD CAUSE SEVERE INJURY OR DEATH. NO RECALL OR WARRANTY ISSUED TO ME. THIS SHOUL…
Read full complaint
COMMON SUBFRAME CORROSION ON LOW MILEAGE 2007 VEHICLES CAUSING EXTREME SAFETY ISSUES WHILE DRIVING. WAS WARNED BY AUTO SHOP THAT THIS IS COMMON AND RENDERS SAFETY ISSUES TO DRIVER AS ENTIRE ENGINE COULD DROP WHEN DRIVING OR WHEEL SEPARATION, THAT COULD CAUSE SEVERE INJURY OR DEATH. NO RECALL OR WARRANTY ISSUED TO ME. THIS SHOULD BE A SAFETY RECALL AS COMMON AS IT IS.
NHTSA ODI #11318967
90,000 miles · Feb 23, 2020
SteeringStructureSuspension
HAVE A 2007 DODGE CALIBER WITH 90K MILES. MY WIFE RECENTLY WENT TO GET IT INSPECTED AND COME TO FIND OUT THE FRONT AND REAR CROSSMEMBERS AND SUBFRAME COMPONENTS WERE TERRIBLY CORRODED. NEEDLESS TO SAY IT WAS NOT PASSED. IT'S STARTED SHAKING WHILE DRIVING, ALIGNMENT IS OFF ACCORDING TO TIRE WEAR. I'VE READ TONS OF COMPLAINTS AND …
Read full complaint
HAVE A 2007 DODGE CALIBER WITH 90K MILES. MY WIFE RECENTLY WENT TO GET IT INSPECTED AND COME TO FIND OUT THE FRONT AND REAR CROSSMEMBERS AND SUBFRAME COMPONENTS WERE TERRIBLY CORRODED. NEEDLESS TO SAY IT WAS NOT PASSED. IT'S STARTED SHAKING WHILE DRIVING, ALIGNMENT IS OFF ACCORDING TO TIRE WEAR. I'VE READ TONS OF COMPLAINTS AND SEE THEY ISSUES NOT A RECALL BUT A 10 YEAR EXTENDED WARRANTY ON THIS ISSUE. CURIOUS AS TO WHEN THIS WAS ISSUED AND IF MY CAR FALLS INTO THAT
NHTSA ODI #11310886
178,000 miles · Feb 3, 2020
Structure
STARTED HEARING A LOUD BANGING NOISE WHENEVER I WOULD HIT A BUMP OR TURN LEFT COMING FROM DRIVERS SIDE TIRE. AFTER GETTING HOME, I CHECKED AND THE ENTIRE SUBFRAME IS RUSTED OUT.
NHTSA ODI #11306635
104,000 miles · Jan 17, 2020
Structure
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE VEHICLE SHOWED MAJOR CORROSION TO THE UNDERCARRIAGE. THE CONTACT STATED THAT WHILE HER DAD WAS DRIVING THERE WAS A VIBRATION WITH THE VEHICLE AND THE REAR WHEEL FELT AS IF WAS ABOUT TO DETACHED. THE DRIVER NOTICED UNDERNEATH THE VEHICLE BOTH CROSS MEMBER WERE…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE VEHICLE SHOWED MAJOR CORROSION TO THE UNDERCARRIAGE. THE CONTACT STATED THAT WHILE HER DAD WAS DRIVING THERE WAS A VIBRATION WITH THE VEHICLE AND THE REAR WHEEL FELT AS IF WAS ABOUT TO DETACHED. THE DRIVER NOTICED UNDERNEATH THE VEHICLE BOTH CROSS MEMBER WERE CORRODED WITH HOLES. THE VEHICLE WAS NOT TAKEN TO A DEALER OR AN INDEPENDENT MECHANIC AND WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND INFORMED THE CONTACT THAT THE VIN WAS NOT PART OF A RECALL. NO ASSISTANCE WAS PROVIDED. THE FAILURE MILEAGE WAS APPROXIMATELY 104,000. THE CONSUMER SUBMITTED PHOTOS OF THE VEHICLE. *TR
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
2007 Dodge Caliber Problems, Complaints & Recalls | Skip That Year
Illustration