THE 2007 DODGE CALIBER SXT IS EXTREMELY HARD ON ITS SUSPENSION AND STEERING COMPONENTS. I WAS TOLD IT IS NORMAL FOR THE BALL JOINTS AND TIE RODS TO ALMOST FALL OFF AFTER 50K MILES. THE WARRANTY I PURCHASED WILL NOT COVER THE COST OF REPAIRS BECAUSE IN THEIR OPINION IT IS NORMAL WEAR AND TEAR ON THE VEHICLE. I BELIEVE IT IS NO…
Read full complaint
THE 2007 DODGE CALIBER SXT IS EXTREMELY HARD ON ITS SUSPENSION AND STEERING COMPONENTS. I WAS TOLD IT IS NORMAL FOR THE BALL JOINTS AND TIE RODS TO ALMOST FALL OFF AFTER 50K MILES. THE WARRANTY I PURCHASED WILL NOT COVER THE COST OF REPAIRS BECAUSE IN THEIR OPINION IT IS NORMAL WEAR AND TEAR ON THE VEHICLE. I BELIEVE IT IS NOT NORMAL FOR THIS PROBLEM TO OCCUR. LOOKING AT SIMILAR COMPLAINTS ONLINE I THINK DODGE SHOULD CONSIDER THIS A SAFETY RECALL. *TR
NHTSA ODI #10361586
53,000 miles · Sep 24, 2010
SteeringSuspension
2007 DODGE CALIBER SXT HAVING BALL JOINT/TIE ROD/CONTROL ARM FAILURE AT 53,000 MILES. REPLACEMENT OF ALL PARTS AT 1000.00 EXPENSIVE. VEHICLE IS ONLY 3 YRS OLD AND HAVE READ NUMEROUS COMPLAINTS ABOUT THIS AS A SAFETY ISSUE. *TR
NHTSA ODI #10357421
62,000 miles · Sep 2, 2010
SteeringSuspension
LOWER BALL JOINTS AND CONTROL ARMS ARE DEFECTIVE ON 2007 DODGE CALIBERS. *TR
NHTSA ODI #10353443
52,000 miles · Aug 30, 2010
SteeringSuspension
2007 DODGE CALIBER. BALL JOINTS AND TIE RODS FAILING AT 52,000 MILES. VERY PREMATURE. THE DEALER SAID THE VEHICLE WAS NOT SAFE TO DRIVE OFF THE LOT. *TR
NHTSA ODI #10352884
54,212 miles · May 10, 2010
Steering
THE TIE-RODS IN MY 2007 DODGE CALIBER WERE SO WORN THEY NEEDED IMMEDIATE REPLACEMENT. THE MANAGER OF THE LES SCHWAB TIRE COMPANY I VISITED REMARKED THAT FOR THE AGE AND MILEAGE ON THE VEHICLE THE TIE-RODS SHOULD NOT BE NEEDING REPLACED. *TR
NHTSA ODI #10329821
60,000 miles · May 4, 2010
Electrical SystemPower TrainSteeringInjury
TL*THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING APPROXIMATELY 25-30 MPH, THE CONTACT STATED THAT THE ACCELERATOR PEDAL BECAME STUCK WHEN IT WAS DEPRESSED AND THE VEHICLE ACCELERATED UP TO 80 MPH. WHEN THE CONTACT APPLIED THE BRAKES, THE VEHICLE DID NOT SLOW DOWN. THE STEERING WHEEL WOULD NOT MOVE AND THE GEAR SHIFT LEVER…
Read full complaint
TL*THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE DRIVING APPROXIMATELY 25-30 MPH, THE CONTACT STATED THAT THE ACCELERATOR PEDAL BECAME STUCK WHEN IT WAS DEPRESSED AND THE VEHICLE ACCELERATED UP TO 80 MPH. WHEN THE CONTACT APPLIED THE BRAKES, THE VEHICLE DID NOT SLOW DOWN. THE STEERING WHEEL WOULD NOT MOVE AND THE GEAR SHIFT LEVER WOULD NOT SHIFT INTO PARK. WHEN SHE APPLIED THE EMERGENCY BRAKE, THE VEHICLE SPUN OVER A SIDEWALK INTO A PARKING LOT. THE IDENTICAL FAILURE OCCURRED WHEN SHE ATTEMPTED TO RESTART THE VEHICLE; THEREFORE, SHE TOWED THE VEHICLE TO AN AUTHORIZED DEALER. TWO MONTHS PRIOR TO THE FAILURE, THE KEYS BECAME STUCK IN THE IGNITION FOR THIRTY MINUTES. THE DEALER HAD NOT INFORMED THE CONTACT WHAT CAUSED THE FAILURE TO OCCUR. THE CONTACT STATED THAT SHE EXPERIENCED HEADACHES AND NECK PAIN AFTER THE FAILURE OCCURRED. THE CURRENT AND FAILURE MILEAGES WERE APPROXIMATELY 60,000.
NHTSA ODI #10328748
48,585 miles · Apr 8, 2010
Exterior LightingInterior LightingPower Train
4 SETS OF HEADLIGHT HAVE BLOWN ON THE CAR IN THE LAST 6 MONTHS. THEN MY GEARS AREN'T SHIFTING CORRECTLY BECAUSE IT'S MAKING A CLICKING NOISE WHICH HAS BEEN HEARD BY SEVERAL PEOPLE. ALSO THE STEERING WHEEL CLICKS WHEN YOU TURN IT ON OCCASIONS. ON A 2007 DODGE CALIBER SXT2.0. *TR
NHTSA ODI #10324504
70,000 miles · Mar 15, 2010
SteeringSuspension
I OWN A 2007 DODGE CALIBER SXT. RECENTLY TOOK IT IN TO BE REPAIRED BECAUSE CAR WAS PULLING SEVERELY TO ONE SIDE WHILE DRIVING AND MAKING BAD GRINDING SOUNDS. MECHANIC DISCOVERED THE INNER AND OUTER TIE RODS AND ALSO THE BALL JOINTS ON BOTH SIDES IN THE FRONT OF THE VEHICLE WERE SO DETERIORATED THAT HE DEEMED THE VEHICLE UNDRIV…
Read full complaint
I OWN A 2007 DODGE CALIBER SXT. RECENTLY TOOK IT IN TO BE REPAIRED BECAUSE CAR WAS PULLING SEVERELY TO ONE SIDE WHILE DRIVING AND MAKING BAD GRINDING SOUNDS. MECHANIC DISCOVERED THE INNER AND OUTER TIE RODS AND ALSO THE BALL JOINTS ON BOTH SIDES IN THE FRONT OF THE VEHICLE WERE SO DETERIORATED THAT HE DEEMED THE VEHICLE UNDRIVEABLE UNTIL REPAIRS WERE MADE. IN HIS OFFICIAL OPINION THEY WERE THE WORST HE HAD EVER SEEN THAT DID NOT RESULT IN THE TIRES FALLING OFF. AFTER DOING RESEARCH ON THE DODGE CALIBER MODELS I HAVE SEEN THAT THIS IS A COMMON PROBLEM WITH THAT MAKE AND MODEL OF VEHICLE. WHAT HAPPENS WHEN YOUR TIRES FALL OFF AT 65 MPH ON A HIGHWAY? I DO NOT WANT TO BE DRIVING WHEN THAT HAPPENS. NO THIS PROBLEM HAS NOT LED TO A DEATH YET, BUT DO WE REALLY NEED TO WAIT UNTIL IT DOES BEFORE CHRYSLER IS FORCED TO UPGRADE THE PARTS ON THEIR VEHICLES? $1000 WORTH OF PARTS AND SERVICE ON A 4 YEAR OLD CAR IS RIDICULOUS AND TO KNOW THAT BECAUSE THEY CHOSE TO USE LOW QUALITY PARTS THAT COULD HAVE RESULTED TO MY TIRES FALLING OFF AT 65 MPH IS UNSETTLING. *TR
NHTSA ODI #10319613
36,000 miles · Nov 17, 2009
SteeringSuspension
I PURCHASED MY 2007 DODGE CALIBER AUGUST 2007. NOTHING HAPPENED UNTIL THE WARRANTY WAS UP. HERE IS WHAT HAS HAPPENED AND MILEAGE. 40,000 RIGHT FRONT STRUT 45,000 LEFT FRONT STRUT 50,000 OUTER TIE RODS REPLACE L AND R 55,000 BALL BEARINGS AND LOWER CONTROL ARMS HAVE TO BE REPLACED 65,000 REPLACE 2 SENSORS THAT ARE NOT COMM…
Read full complaint
I PURCHASED MY 2007 DODGE CALIBER AUGUST 2007. NOTHING HAPPENED UNTIL THE WARRANTY WAS UP. HERE IS WHAT HAS HAPPENED AND MILEAGE. 40,000 RIGHT FRONT STRUT 45,000 LEFT FRONT STRUT 50,000 OUTER TIE RODS REPLACE L AND R 55,000 BALL BEARINGS AND LOWER CONTROL ARMS HAVE TO BE REPLACED 65,000 REPLACE 2 SENSORS THAT ARE NOT COMMUNICATING SO CAR IS STALLING AND NOW HOT WATER SPRAYING ON MY FOOT WHEN GAS IS PUSHED DOWN AND BURNT MY FOOT THIS CAR SHOULD OF HAD MANY MORE RECALLS THAN IT HAS. DODGE/CHRYSLER HAS DONE NOTHING TO HELP ME WITH THESE COSTS AND NOW I AM STUCK. *TR
NHTSA ODI #10292456
41,500 miles · Oct 22, 2009
Steering
I HAD TO HAVE THE FRONT TIE ROD ENDS REPLACED ON MY 2007 DODGE CALIBER AT 41,500 MILES. AFTER RESEARCHING THE PROBLEM A LITTLE MORE AND DISCUSSING IT WITH THE SERVICE TECHNICIAN, IT SEEMS THAT THIS IS A BIG PROBLEM WITH 2007 DODGE CALIBERS AND LATE MODEL DODGES IN GENERAL. THIS IS A SERIOUS SAFETY ISSUE. THE TECHNICIAN TOLD ME T…
Read full complaint
I HAD TO HAVE THE FRONT TIE ROD ENDS REPLACED ON MY 2007 DODGE CALIBER AT 41,500 MILES. AFTER RESEARCHING THE PROBLEM A LITTLE MORE AND DISCUSSING IT WITH THE SERVICE TECHNICIAN, IT SEEMS THAT THIS IS A BIG PROBLEM WITH 2007 DODGE CALIBERS AND LATE MODEL DODGES IN GENERAL. THIS IS A SERIOUS SAFETY ISSUE. THE TECHNICIAN TOLD ME THAT I'M LUCKY THE STEERING DIDN'T GO OUT IN MY CAR WHILE I WAS DRIVING DOWN THE HIGHWAY. THIS IS SOMETHING THAT SHOULD BE INVESTIGATED IMMEDIATELY AS THERE ARE A LOT OF DODGE CALIBERS ON THE ROAD RIGHT NOW. WHAT'S IT GOING TO TAKE TO GET SOME ACTION DONE ABOUT THIS? SOMEONE DYING IN A HORRIBLE ACCIDENT? *TR
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
2007 Dodge Caliber Problems, Complaints & Recalls | Skip That Year
Illustration