Vehicle tipm shut off transmission while driving an cause a traffic jam on a busy intersection caused the transmission system to go in limp mode an no breaks. Was very dangerous lucky I had a hand break that worked cause engine to shut off an studder had to get towed an transported the vehicle home an got it inspected by a mobil…
Read full complaint
Vehicle tipm shut off transmission while driving an cause a traffic jam on a busy intersection caused the transmission system to go in limp mode an no breaks. Was very dangerous lucky I had a hand break that worked cause engine to shut off an studder had to get towed an transported the vehicle home an got it inspected by a mobile mechanic an says the fuse box had blown internal components due to failing internal electrical components or weak points in the tipm system
NHTSA ODI #11736456
Mileage unknown · Oct 6, 2025
Power TrainStructureWheels
I was informed on 09/29/2025 by my Chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engin…
Read full complaint
I was informed on 09/29/2025 by my Chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same thing by the shop manager: "If you hit a bump while driving this vehicle you could lose your back wheels". In the first incident, the engine could have fallen out of my vehicle. He was not going to let me drive it home. Then he changed his mind and told me it was "at my discretion". I did drive it home (4.5 miles) with no problem. He told me he was going to try and find a new or used part to fix the issue. He made it clear that he was not hopeful of finding one. This is twice now that my life and the lives of any drivers on the road at the same time were placed in danger from excessive rusting problems. I submitted files in the first incident showing that Chrysler was aware of the issue. A copy of the corporate service bulletin was attached. To my knowledge nothing was ever done. Is anything going to be done this time?
NHTSA ODI #11691736
Mileage unknown · Nov 15, 2022
Power TrainSuspension
Started hearing a loud banging noise whenever i would hit a bump or turn left coming from drivers side tire. after getting home, i checked and the entire subframe is rusted out.
NHTSA ODI #11493580
240,578 miles · Sep 12, 2022
Power Train
The contact owns a 2007 Dodge Caliber. The contact stated while driving 70 MPH, the vehicle stalled. The contact was able to veer to the side of the road. The message "Transmission Overheating" and the ABS warning light was illuminated. The contact restarted the vehicle; however, the vehicle would not exceed 30 MPH while driving…
Read full complaint
The contact owns a 2007 Dodge Caliber. The contact stated while driving 70 MPH, the vehicle stalled. The contact was able to veer to the side of the road. The message "Transmission Overheating" and the ABS warning light was illuminated. The contact restarted the vehicle; however, the vehicle would not exceed 30 MPH while driving. The contact veered to the side of the road, where the vehicle remained. The local dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure but provided no assistance. The failure mileage was approximately 240,578.
NHTSA ODI #11484123
163,000 miles · Oct 27, 2021
Power Train
The contact owns a 2007 Dodge Caliber. The contact stated while driving 65-70 MPH, the vehicle inadvertently stalled. There were no warning lights illuminated. The contact veered to the side of the road and was able the restart the vehicle. The vehicle was taken to the independent mechanic who diagnosed that the transmission con…
Read full complaint
The contact owns a 2007 Dodge Caliber. The contact stated while driving 65-70 MPH, the vehicle inadvertently stalled. There were no warning lights illuminated. The contact veered to the side of the road and was able the restart the vehicle. The vehicle was taken to the independent mechanic who diagnosed that the transmission control module had failed and needed to be replaced. The dealer and the manufacturer were not notified of the failure. The vehicle was not repaired. The approximate failure mileage was 163,000.
NHTSA ODI #11438320
198,000 miles · Dec 20, 2020
Power TrainSteeringSuspension
I HAVE A 07 CALIBER BOUGHT OFF A INDIVIDUAL CASH PRICE.WASN'T AWARE OF THE CONCERN ISSUE WITH THE FRONT LEFT BROKEN STRUTS,. NO START OR NO CRANK DUE TO THEFT SYSTEM WIRELESS CONTROL MODULE. ... WATER LEAK FROM SUN ROOF DRAIN TUBES. ... BLOWN STRUTS. ... ENGINE AND TRANSMISSION CONTROL MODULES MAY NEED TO BE UPDATED AT THE SA…
Read full complaint
I HAVE A 07 CALIBER BOUGHT OFF A INDIVIDUAL CASH PRICE.WASN'T AWARE OF THE CONCERN ISSUE WITH THE FRONT LEFT BROKEN STRUTS,. NO START OR NO CRANK DUE TO THEFT SYSTEM WIRELESS CONTROL MODULE. ... WATER LEAK FROM SUN ROOF DRAIN TUBES. ... BLOWN STRUTS. ... ENGINE AND TRANSMISSION CONTROL MODULES MAY NEED TO BE UPDATED AT THE SAME TIME. ... NO START OR NO CRANK DUE TO THEFT SYSTEM ISSUE. ... EXCESS DRAIN ON BATTERY DUE TO FAULTY RADIO.AS WELL MOAN TYPE NOISE FROM EXHAUST SQUEEK NOISE FROM CLUTCH PEDAL AC COMPRESSOR AND CONDENSOR REPLACMENT DUE TO "SLUGGING" CONDITION NOISE FROM HVAC BLOWER MOTOR DUE TO DEBIRS SWISH SOUND FROM REAR SUSPENSION SOFTWARE UPDATE FOR STEERING ANGLE SENSOR FAULT WHISTLE SOUND FROM LEFT OUTSIDE MIRROR ASSEMBLY METALLIC RATTLE SOUND FROM LIFTGATE DRIVING AROUND TOWN
NHTSA ODI #11384247
199,674 miles · Dec 17, 2020
Power TrainSteeringSuspension
PROBLEM WITH FRONT STRUTS THE STEERING WHEEL AS WELL . THE WHOLE FRONT END MOVES HORRIBLE
NHTSA ODI #11383897
180,000 miles · Jun 29, 2020
Power Train
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE PARKING, THE VEHICLE CEASED AND FAILED TO SHIFT INTO GEAR. THERE WERE NO WARNING LIGHTS ILLUMINATED. THE VEHICLE WAS NOT TAKEN TO BE DIAGNOSED NOR REPAIRED. THE LOCAL DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS CONTACTED AND REFERRED THE CONTACT TO NHTSA…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE PARKING, THE VEHICLE CEASED AND FAILED TO SHIFT INTO GEAR. THERE WERE NO WARNING LIGHTS ILLUMINATED. THE VEHICLE WAS NOT TAKEN TO BE DIAGNOSED NOR REPAIRED. THE LOCAL DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS CONTACTED AND REFERRED THE CONTACT TO NHTSA. THE FAILURE MILEAGE WAS 180,000.
NHTSA ODI #11331408
76,000 miles · Jun 24, 2020
Power Train
WHEN EVER WE ARE GOING DOWN THE HIGHWAY ARE 65 MPH THE TRANSMISSION TEMP LIGHT COMES ON AND THE CAR GOES LIMP AND WONT RUN NORMAL TILL IT COOLS DOWN. *TR
NHTSA ODI #11330546
75,000 miles · May 5, 2020
Power Train
TRANSMISSION TEMP LIGHT COMES ON DUE TO FAULTY SENSOR CAUSING CAR TO GO IN LIMP MODE. *TR
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
2007 Dodge Caliber Problems, Complaints & Recalls | Skip That Year
Illustration