NHTSA owner reports · September 18, 2026 snapshot.
Exterior Lighting complaints
93 reportsClear category filter145,827 miles · Aug 8, 2014
Electrical SystemExterior Lighting
THE DRIVERS SIDE HEADLIGHT IS OUT. THE BULB WAS REPLACED AND IT STILL DOES NOT WORK. I WAS TOLD THAT THE TIPM NEEDED TO BE REPLACED. I WAS TOLD THAT THIS IS NOT A SAFETY ISSUE. IT IS A SAFETY ISSUE FOR ONLY HAVING ONE HEAD LIGHT. I GUESS WHEN I RECEIVE A CITATION FOR ONLY ONE HEADLIGHT THEN THE CITATION WILL BE MAILED TO DODGE …
Read full complaint
THE DRIVERS SIDE HEADLIGHT IS OUT. THE BULB WAS REPLACED AND IT STILL DOES NOT WORK. I WAS TOLD THAT THE TIPM NEEDED TO BE REPLACED. I WAS TOLD THAT THIS IS NOT A SAFETY ISSUE. IT IS A SAFETY ISSUE FOR ONLY HAVING ONE HEAD LIGHT. I GUESS WHEN I RECEIVE A CITATION FOR ONLY ONE HEADLIGHT THEN THE CITATION WILL BE MAILED TO DODGE FOR REIMBURSEMENT. *TR
NHTSA ODI #10620892
65,600 miles · Jul 21, 2014
Electrical SystemExterior Lighting
MY DRIVERS SIDE DRIVING LIGHT WAS OUT SO I BOUGHT A NEW BULB. THAT DIDN'T FIX THE PROBLEM SO I LOOKED ONLINE AND SAW EVERYONE WAS HAVING THE SAME PROBLEM AND IT SEEMS TO BE THE TIPM WHICH IS AROUND 1000.00 TO FIX. IF WE ARE ALL HAVING THE SAME PROBLEM I WOULD THINK IT'S SOMETHING THAT DODGE SHOULD BE TAKING CARE OF NOT THE CONSU…
Read full complaint
MY DRIVERS SIDE DRIVING LIGHT WAS OUT SO I BOUGHT A NEW BULB. THAT DIDN'T FIX THE PROBLEM SO I LOOKED ONLINE AND SAW EVERYONE WAS HAVING THE SAME PROBLEM AND IT SEEMS TO BE THE TIPM WHICH IS AROUND 1000.00 TO FIX. IF WE ARE ALL HAVING THE SAME PROBLEM I WOULD THINK IT'S SOMETHING THAT DODGE SHOULD BE TAKING CARE OF NOT THE CONSUMER! *TR
NHTSA ODI #10614906
80,000 miles · Jun 17, 2014
Electrical SystemElectronic Stability Control (esc)Exterior Lighting
MY CAR STARTED MAKING A NOISE AND IDLING HIGH LAST YEAR. IT STARTED CUTTING ITSELF OFF AND EVENTUALLY IT WOULDN'T START. I REPLACED THE ALTERNATOR AND BATTERY. NOW LESS THAN A YEAR LATER 2014, THE LOW LIGHTS DON'T WORK AND IT IS STARTING TO MAKE THE SAME NOISE AND CUT ITSELF OFF. NOW I'M BEING TOLD ITS THE TOTAL INTEGRATED PO…
Read full complaint
MY CAR STARTED MAKING A NOISE AND IDLING HIGH LAST YEAR. IT STARTED CUTTING ITSELF OFF AND EVENTUALLY IT WOULDN'T START. I REPLACED THE ALTERNATOR AND BATTERY. NOW LESS THAN A YEAR LATER 2014, THE LOW LIGHTS DON'T WORK AND IT IS STARTING TO MAKE THE SAME NOISE AND CUT ITSELF OFF. NOW I'M BEING TOLD ITS THE TOTAL INTEGRATED POWER MODULE. *TR
NHTSA ODI #10598772
90,000 miles · Jun 12, 2014
Electrical SystemExterior LightingVisibility/wiper
A COUPLE OF WEEKS AGO I WAS ON MY WAY TO WORK AND TURNED ON MY SIGNAL LIGHT TO MAKE A TURN. WHEN I TURNED MY SIGNAL LIGHT ON I NOTICED THAT THE INTERIOR OVERHEAD LIGHT WENT ON. I FOUND IT STRANGE AND THOUGHT MY DOOR MAY HAVE BEEN OPENED. A FEW DAYS LATER ON MY WAY TO WORK THE SIGNAL LIGHTS WERE NO LONGER WORKING. THIS IS WHE…
Read full complaint
A COUPLE OF WEEKS AGO I WAS ON MY WAY TO WORK AND TURNED ON MY SIGNAL LIGHT TO MAKE A TURN. WHEN I TURNED MY SIGNAL LIGHT ON I NOTICED THAT THE INTERIOR OVERHEAD LIGHT WENT ON. I FOUND IT STRANGE AND THOUGHT MY DOOR MAY HAVE BEEN OPENED. A FEW DAYS LATER ON MY WAY TO WORK THE SIGNAL LIGHTS WERE NO LONGER WORKING. THIS IS WHERE MY SERIOUS CONCERNS BEGAN. I HAVE A 30 MINUTE COMMUTE TO WORK AND SWITCH LANES OR MAKE TURNS QUITE OFTEN EN ROUTE. IT GETS WORSE. AFTER A LONG DAY AT WORK I RAN OUT TO MY VEHICLE TO AVOID GETTIN SOAKED IN THE RAIN AND WHEN I ATTEMPTED TO TURN ON MY WIPERS I WAS INFURIATED TO FIND OUT THEY WERE NO LONGER WORKING EITHER. NEEDLESS TO SAY THE VEHICLE IS PARKED IN MY DRIVEWAY. FOG LIGHTS DON'T WORK, TURN SIGNALS, WIPERS AND HIGHBEAMS ARE NO LONGER WORKING. *TR
NHTSA ODI #10597809
99,621 miles · Apr 29, 2014
Exterior Lighting
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE PASSENGER'S SIDE LOW BEAM FAILED AND DAYS LATER, THE DRIVER'S SIDE LOW BEAM ALSO FAILED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC AND THE TECHNICIAN WAS UNABLE TO FIND A PROBLEM. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE …
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE PASSENGER'S SIDE LOW BEAM FAILED AND DAYS LATER, THE DRIVER'S SIDE LOW BEAM ALSO FAILED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC AND THE TECHNICIAN WAS UNABLE TO FIND A PROBLEM. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 99,621 AND THE CURRENT MILEAGE WAS 105,851.
NHTSA ODI #10585449
14,000 miles · Apr 24, 2014
Electrical SystemExterior Lighting
WATER GOT INTO TAIL LIGHT, FROZE AND MADE RIGHT TURN SIGNAL INOPERABLE. *TR
NHTSA ODI #10584571
61,055 miles · Mar 14, 2014
Exterior Lighting
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED WHEN THE LIGHTS ARE TURNED ON THE DRIVER SIDE LIGHTS FAIL TO ILLUMINATE. THE HIGH BEAMS ARE THE ONLY FUNCTIONAL LIGHTS WHENEVER THE FAILURE OCCURRED. THE DRIVERS SIDE HEAD LIGHT ALSO MALFUNCTIONED. THIS FAILURE CONTINUED TO OCCUR FOR THE PAST TWO MONTHS. THE VEHI…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED WHEN THE LIGHTS ARE TURNED ON THE DRIVER SIDE LIGHTS FAIL TO ILLUMINATE. THE HIGH BEAMS ARE THE ONLY FUNCTIONAL LIGHTS WHENEVER THE FAILURE OCCURRED. THE DRIVERS SIDE HEAD LIGHT ALSO MALFUNCTIONED. THIS FAILURE CONTINUED TO OCCUR FOR THE PAST TWO MONTHS. THE VEHICLE WAS TAKEN TO THE DEALER WHO INDICATED THAT A T.I.M.P. PART NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 61,055. VF
NHTSA ODI #10569256
120,221 miles · Mar 10, 2014
Electrical SystemExterior Lighting
HEAD LIGHT WENT OUT, AFTER CHECKING THE BULB AND FOUND IT GOOD. DID SOME RESEARCH AND FOUND I NEED TO INVEST $1200.00 TO REPLACE THE TIPM. HEAD LIGHTS ARE A REQUIRED SERVICE ON ANY AUTOMOBILE TO DRIVE ON PUBLIC HIGHWAY. WHEN IS DODGE GOING TO TAKE RESPONSIBILITY AND ISSUE A RECALL AND SOLUTION TO FIX THIS PROBLEM BEFORE ANY LO…
Read full complaint
HEAD LIGHT WENT OUT, AFTER CHECKING THE BULB AND FOUND IT GOOD. DID SOME RESEARCH AND FOUND I NEED TO INVEST $1200.00 TO REPLACE THE TIPM. HEAD LIGHTS ARE A REQUIRED SERVICE ON ANY AUTOMOBILE TO DRIVE ON PUBLIC HIGHWAY. WHEN IS DODGE GOING TO TAKE RESPONSIBILITY AND ISSUE A RECALL AND SOLUTION TO FIX THIS PROBLEM BEFORE ANY LOSS OF LIFE IS INCURRED. BY THEIR KNOWING THIS PROBLEM EXISTS THEY ARE OPEN A LARGE LAW SUIT WHEN AN INJURY OCCURS. *TR
NHTSA ODI #10568174
130,000 miles · Feb 26, 2014
Electrical SystemExterior Lighting
I WAS DRIVING AND MY PASSENGER LOW-BEAM HEADLIGHT WENT OUT, SO I WENT AND BOUGHT A NEW HEADLIGHT, UPON INSTALLING IT, IT STILL DIDN'T WORK, BUT THE HIGH BEAM DID. TOOK IT TO DODGE TO SEE IF THEY COULD FIGURE IT OUT AND WAS TOLD IT'S A KNOWN ISSUE WITH CALIBERS AND CERTAIN JEEPS, THE TIPM WENT BAD ON IT AND IT WOULD BE ALMOST $10…
Read full complaint
I WAS DRIVING AND MY PASSENGER LOW-BEAM HEADLIGHT WENT OUT, SO I WENT AND BOUGHT A NEW HEADLIGHT, UPON INSTALLING IT, IT STILL DIDN'T WORK, BUT THE HIGH BEAM DID. TOOK IT TO DODGE TO SEE IF THEY COULD FIGURE IT OUT AND WAS TOLD IT'S A KNOWN ISSUE WITH CALIBERS AND CERTAIN JEEPS, THE TIPM WENT BAD ON IT AND IT WOULD BE ALMOST $1000 TO REPAIR IT, FOR A KNOWN ISSUE THAT DODGE KNOWS ABOUT BUT HASN'T BEEN RECALLED! 2 WEEKS LATER, MY HIGHBEAM EVEN WENT OUT ON THE PASSENGER SIDE, SO NOW THE CAR IS SITTING PARKED, UNABLE TO DRIVE WITH IMPROPER LIGHTING & TIPM PROBLEMS! *TR
NHTSA ODI #10566029
87,500 miles · Feb 9, 2014
Electrical SystemExterior Lighting
THE LOW BEAM HEADLIGHTS WENT OUT AND BOTH BULBS ARE KNOWN GOOD. ITS THE TIPM TOTAL INTEGRATED POWER MODULE THAT'S THE CULPRIT AND IT COSTS $900.00 TO REPLACE. I'M DEMANDING A TOTAL RECALL ON ALL DODGE CALIBERS. *TR
NHTSA ODI #10563569
Official recalls
4Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
Illustration