IllustrationRECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER RECEIVED THIS RECALL NOTICE AND WAS UNABLE TO LOCATE AN AUTHORIZED SERVICE CENTER IN THEIR AREAS.*AK
2000 Daewoo Leganza
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2000 Daewoo Leganza do not stand out strongly from the model-year median of 118.
About this comparison →How this year compares
Owner complaints by model year
Compare all Leganza years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
80–25K
2925–50K
2750–75K
975–100K
1100–150K
2150K+
76 reports with mileage · 144 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Engine And Engine Cooling. Review the 183 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 18 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Air Bags. Review the 7 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
5 crash reports7 fire reports3 injury reports
Engine And Engine Cooling complaints
183 reportsCONSUMER RECEIVED, NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE IN THE RADIUS OF 100 MILES.*AK
DEALERSHIP WAS UNABLE TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS BECAUSE THE PARTS WERE NOT AVAILABLE.*AK
CONSUMER RECEIVED A RECALL NOTICE(04V35700) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB
CONSUMER RECEIVED A RECALL(04V357000) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB
CONSUMER RECEIVED A RECALL NOTICE(04V357000) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB
CONSUMER RECEIVED A RECALL NOTICE(04V357000) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB
04V357000/CAMSHAFT POSITION SENSOR. THE OWNER RECEIVED A RECALL NOTICE FROM THE MANUFACTURER AND TOOK THE VEHICLE TO AN AVAILABLE DAEWOO DEALERSHIP WHO DENIED THE CONSUMER BECAUSE THE VEHICLE WAS NOT PURCHASED FROM THAT DEALERSHIP. PROVIDE FURTHER DETAILS. *JB
CONSUMER RECEIVED NHTSA RECALL 04V357000 FOR THE CAMSHAFT POSITION SENSOR. THE CONSUMER CONTACTED THE DEALER AND THE DEALER DID NOT HAVE THE PARTS AVAILABLE. *JB
THE CONSUMER WAS UNABLE TO FIND A DEALERSHIP OR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. RECALL#04V357000 CAMSHAFT POSITION SENSOR. PLEASE PROVIDE MORE INFORMATION. *JB
Official recalls
304V394000 · Engine And Engine Cooling
Aug 6, 2004
ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
Consequence & remedy
Consequence: THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
Remedy: DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. OWNERS SHOULD CONTACT DAEWOO PUERTO RICO AT 1-877-362-1234 OPTION 6.
04V357000 · Engine And Engine Cooling
Jul 14, 2004
ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.
Consequence & remedy
Consequence: THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.
Remedy: DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. THE RECALL BEGAN ON SEPTEMBER 7, 2004. OWNERS SHOULD CONTACT DAEWOO AT 1-877-362-1234, OPTION 6, OR FIND A LOCAL DEALER THROUGH THEIR WEBSITE AT WWW.DAEWOOUS.COM.
01V180000 · Structure:frame And Members
May 31, 2001
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." THESE VEHICLES EXCEED THE MAXIMUM ALLOWABLE HEAD INJURY CRITERION VALUE SPECIFIED IN THE STANDARD FOR PASSENGER-SIDE A-PILLAR TARGET LOCATION.
Consequence & remedy
Consequence: CONSEQUENTLY, IN A CRASH, THE FRONT SEAT PASSENGER COULD SUFFER INCREASED HEAD INJURY FROM CONTACT WITH THE PASSENGER A PILLAR (FORWARD MOST ROOF SUPPORT).
Remedy: DEALERS WILL INSTALL PADDING TO THE A PILLAR TO REDUCE THE RISK OF INJURY IN A CRASH. OWNER NOTIFICATION BEGAN JUNE 8, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAEWOO AT 1-877-463-2396.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.