2021 Chrysler Pacifica

I am reporting a critical manufacturer-imposed restriction that prevents the completion of a life-saving safety campaign, Recall 52D (NHTSA ID: 24V362), which carries a strict "Park Outside and Do Not Charge" advisory.My vehicle has an active fault code P0E15 (Electric Coolant Heater control performance), which is a well-known, widespread factory defect in Chrysler Pacifica Hybrids. When I took the vehicle to an authorized Stellantis/Chrysler dealership to perform the urgent 52D safety flash, the dealer officially refused to perform the recall. They stated that the manufacturer's diagnostic software (wiTECH) completely blocks the 52D software update from being uploaded if the P0E15 fault is present.I contacted FCA US Customer Care (Case Number: 97720299), and they officially replied that they will not issue a corporate override for their diagnostic software. They are conditioning the execution of a critical fire-safety recall on me privately paying for the repair of a separate known manufacturer defect (P0E15 heater), due to the vehicle's export status.This is a severe threat to public safety and an unacceptable corporate practice. A manufacturer should not be allowed to design diagnostic tools that block critical, life-saving safety recalls due to other unrelated factory defects, effectively forcing owners to drive potential fire hazards unless they pay for commercial repairs. I request NHTSA to investigate FCA US's refusal to deploy safety updates on vehicles with active P0E15 codes.

Driving on the interstate at high speed, when check engine light comes on, warning message - Stop Safely Vehicle Will Shut Off - and red turtle warning indicator (limp mode). After a short time, vehicle will no longer accelerate. I pulled over to the shoulder, stopped and shut off engine. Restarted after a few minutes and everything appeared to work fine, with check engine light on. About 15 minutes later, it happened again. The dealership serviced the vehicle. Found error code P0A78 for driver moteo "A" inverter performance. Used Stellantis Technical Service Bulletin 08-253-24 to diagnose (both modules were out of date) and complete the indicated updates. This is a known issue that has affected many vehicles (per internet forums and that Stellantis has created a TSB. It is an extremely dangerous situation causing the vehicle to enter "limp mode" and requiring the driver to stop in a matter of minutes. Stellantis should recall all potentially affected vehicles to update the modules proactively.

This 2021 Chrysler Pacifica Hybrid has a severe and recurring history of catastrophic high-voltage hybrid powertrain and transmission failures that cause a sudden loss of motive power while driving, presenting an immediate safety hazard. The vehicle has already required two full automatic transmission (eFlite EVT) replacements under factory warranty due to internal failures. It has experienced multiple high-voltage component repairs, including software modules for the power inverter. The vehicle is currently experiencing a recurring failure and is displaying active diagnostic trouble code P0A78 (Drive Motor "A" Inverter Performance), indicating a critical fault in the high-voltage hybrid propulsion system. Prior to the current failure, the check engine light illuminated, and the vehicle experienced propulsion system degradation. This failure mode risks a sudden shutdown of the hybrid drive system at highway speeds, creating a severe risk of rear-end collisions or being stranded in active traffic. The recurring nature of these transmission and inverter failures indicates a systemic safety defect in the hybrid propulsion system. The issue and the active P0A78 code have been pulled, reproduced, and confirmed by an authorized dealership (Diehl Automotive of Robinson), where the vehicle is currently held and available for inspection. The manufacturer has been notified via an open corporate case (#97399722).

My 2021 Chrysler Pacifica Hybrid has a recurring hybrid/electrical defect that causes the accelerator to lose all power while driving, leaving the vehicle unable to accelerate or respond to throttle input. The vehicle remains “on,” but it cannot move under its own power and must be coasted or pulled over immediately. This has happened in traffic, including with children in the vehicle. The dealer confirmed fault code P1A21‑00 and documented that the high‑voltage system can lose its loop connection, which results in a no‑propulsion condition. They also found the HVIL high‑voltage connector loose and damaged. The vehicle was in the shop for 18 days for this issue. I picked it up on June 18, 2026, and within 24 hours the same loss‑of‑propulsion failure happened again. The vehicle is now back at the dealer. The dealer performed recall 52D and updated the BPCM software, but the failure still occurred immediately after pickup. This defect has been reproduced and confirmed by the dealership multiple times and remains unresolved. This is a serious safety hazard because the vehicle loses propulsion without warning and cannot accelerate in traffic.

While driving the vehicle, the accelerator will become inactive and result in the vehicle slowing to a stop. I will shut off the ignition and let vehicle rest for 10-20 mins before restarting. This does not resolve the issue and I end up towing the vehicle into the manufacturer’s service department. This often results in 100s of dollars in “diagnostic” fees. The service dept claims it’s bad battery, changes and issue arises again. Next they say it needed a software update, and a few days later it fails again. Next they said it was PCM module and replaced it, and finally they replaced the transmission. The 4th visit, change of transmission, lasted a little over a year and then the issue arose once again! After paying $259 in diagnostic fees, they said I used a bad “charger”

I encountered two incidents of the same type. One was on Friday, March 27, 2026, the same day I picked up the vehicle from a local Chrysler dealership, where software updates and issues related to recalls were supposedly completed. The vehicle was at 38% battery level at the time of pick up from the dealership parking lot. After driving it for about 14 miles, the battery level depleted to <1% and that's when the "Stop Safety. Vehicle will shut off soon" displayed on the dashboard. I slowly drove for less than a minute and parked the vehicle and turned it off. Then restarted and drove for less than two minutes, but again the same warning ("Stop Safety. Vehicle will shut off soon") displayed; I turned it off again. After taking a few minutes break, I restarted it and it was showing 1% battery; it gave me a little distance to travel until unfortunately the same warning displays. Fortunately, this time I was close to a place where I can charge the battery. The battery got charged to 100%, partly on the night of March 27th and the remaining in the morning on March 28th. The second incident was on March 29, 2026, on Sunday afternoon. As soon as the battery level reached <1%, the exact the same warning ("Stop Safety. Vehicle will shut off soon") was displayed. I slowly drove the vehicle to the side of the road and called my insurance company; I reported the issue and requested them to tow the vehicle to a nearby Chrysler dealership. As of now, the vehicle is at the dealership parking waiting for diagnosis. Based on my initial conversation with the customer service person, they don't know if this is considered part of any recall or not. Not only was I stranded on the road because of the above incidents, not having the vehicle at the moment is straining me a lot - trying to handle personal and work schedules.

While driving at normal road speed, the vehicle suddenly lost propulsion and entered limp mode. A turtle warning icon appeared along with multiple system fault messages. The vehicle began slowing down on it's own and was unable to accelerate. I pulled to the side of the road. The vehicle displayed an error "Stop Safely Vehicle Will Shut Off Soon". After sitting for a period of time, the vehicle restarted and was able to be driven again, but the failure occurred without warning and created a dangerous situation in traffic. Diagnostic trouble codes were present related to the hybrid system and high-voltage battery, including P1D43, P1A21, U029A, and U0412. These codes indicate faults in the hybrid control system and battery communication. A Chrysler service department inspected the vehicle, confirmed the trouble codes, and returned it to me without repair because the issue was not immediately reproducible at the dealership. The vehicle has a history of similar intermittent issues, including prior loss-of-power events and repeated service visits for hybrid system faults. The condition is not consistently reproducible, but when it occurs it results in a sudden loss of motive power while driving. This creates a significant safety risk due to unexpected loss of propulsion in active traffic.

Reversing onto roadway and shifted from reverse to drive via rotary dial and vehicle went into park and would not move causing me to block the roadway. In addition and even more concerning was that the vehicle could not be turned off and any and all actions to do so just left the car "on" and the hybrid system running. Eventually we pulled the battery cable on the main 12v in the trunk and the reset allowed us to move the vehicle again. I sat across a busy section for twenty minutes with no way to move, turn off, or overide the system with three kids with me in a busy traffic area. The vehicle has not reproduced the issue as of yet. The dash had multiple warnings for park system and service various items needed. this occurred 12/17/2025 with 70,000 miles.

High pressure fuel leak with large fan spray pattern in fuel line part number 68492134AA where it sits and rubs against a sharp corner of another component, (appears to be ignition coil) above the rear passenger side of the engine. Searched online and found another owner had posted an image of the exact same leak! https://www.reddit.com/r/ChryslerPacifica/comments/1amcdp9/2021_pacifica_hybrid_fuel_leak/Their photo and mine are identical and in comments on their thread, Two other owners that responded to that thread also said they've also had exactly the same leak. The cause appears to be how this line is routed by the factory. it is resting against the coil and not secured in a way to prevent chafing. Result is extremely dangerous with fuel spraying down towards the exhaust. The part is available for inspection. Safety of my family was put at risk by fuel spraying towards hot exhaust while my wife was driving. She was unaware of problem until fuel smell just prior to arriving at home. Problem is easily reproduced. I spoke with Olympia Chrysler Jeep and the service advisor Corey, said he had seen this issue before as well. He also said because car is not under warranty and I don't have roadside assistance, towing would be at my expense. I have ordered replacement part and will install and secure it to prevent chafing. I will keep part to be availalbe for examination. There were no warning lamps, messages or other symptoms prior to the fuel smell.

While driving 70MPH on the expressway the dash randomly sent a message saying “Pull over vehicle shutting off” and then it put itself into limp mode. Thankfully we were able to coast to the small shoulder and put on our hazards. This happened at 2am with 4 kids in the car. Nothing in the car would work, it wouldn’t turn on, shift, nothing. We had to sit on the side of the expressway for hours waiting for a tow. While waiting it had the check engine light on, limp mode light, and messages to service hybrid system & plug in battery for reconditioning. It is waiting to be serviced, but there is a very limited amount of techs that will service it due to being a hybrid.