← New search

2023 Chrysler Pacifica PLUG-IN Hybrid

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2023 Chrysler Pacifica PLUG-IN Hybrid do not stand out strongly from the model-year median of 42.5.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Pacifica PLUG-IN Hybrid years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 7 of 40 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Engine. Review the 18 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Power Train. Review the 15 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 14 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

1 crash reports0 fire reports1 injury reports

Vehicle Speed Control complaints

5 reports
Clear category filter
Mileage unknown · Feb 12, 2025
Electrical SystemUnknown Or OtherVehicle Speed Control

Vehicle had been operating less than 5 minutes. When I was on an on-ramp for a left entrance to a highway, several warning lights illuminated in addition to messaging on my dash. The car entered "turtle mode" which extremely limited the speed of the vehicle. I immediately pressed the button for my hazard lights to come on, but…

Read full complaint

Vehicle had been operating less than 5 minutes. When I was on an on-ramp for a left entrance to a highway, several warning lights illuminated in addition to messaging on my dash. The car entered "turtle mode" which extremely limited the speed of the vehicle. I immediately pressed the button for my hazard lights to come on, but they did not operate correctly. They flashed so rarely that they did not warn vehicles behind me that I was having an incident. During this incident, the vehicle speedometer was inoperable, displaying "-- --" instead of a speed. I was lucky to be able to pull to the shoulder, but with the narrow shoulder and my child in the car I felt safer limping off the highway using primarily the shoulder. I was terrified and had some cars nearly hit me/honk as I was going approximately 10 miles per hour on a 55mph roadway. I have seen similar reports on online forums for chrysler pacifica minivans, so I am not the only one to encounter the issue. The vehicle has also at times refused to go into gear while in Park, which is a related problem but I don't deem it a safety issue. The problem is intermittent and the service center is able to see 'codes' when they examine the vehicle but as the issue is intermittent they have returned the car to me twice with no repairs performed since it didn't occur while they had it. The warning lights and turtle mode occurred simultaneously or within a few seconds. I have a video during the incident. I can see the fuel gauge needle rising and falling wildly, turtle mode, a picture of a wrench, check engine, parking brake, brake, collision avoidance, ABS, and others. Each time the vehicle has gone in for service they have seen and cleared codes but they did not come back immediately, so no repairs were attempted. It is in the shop again currently and I have escalated to the manufacturer to hopefully get greater assistance.

NHTSA ODI #11642219

Mileage unknown · Aug 18, 2024
Electrical SystemUnknown Or OtherVehicle Speed Control

Vehicle was purchased new on [XXX]. 360 surround cameras and Connect box malfunctioned and vehicle was brought in for service on July 10, 2024. I was told by the service advisor that the camera was a poor connection and simply plugged back in but they were unable to reproduce the UConnect issue and that it was currently working.…

Read full complaint

Vehicle was purchased new on [XXX]. 360 surround cameras and Connect box malfunctioned and vehicle was brought in for service on July 10, 2024. I was told by the service advisor that the camera was a poor connection and simply plugged back in but they were unable to reproduce the UConnect issue and that it was currently working. On [XXX] I started the vehicle in my driveway and it immediately entered "limp mode" with a large red turtle appearing on the dash and the check engine light illuminated. The vehicle would not drive greater than 5mph and posed a safety risk on the road so was towed to the dealer. The hybrid battery coolant hose was replaced and I picked up the vehicle on [XXX]. The diagnostic code relayed to me was P0C44-00. On [XXX], I started the vehicle in a family member's driveway and it again entered limp mode with the red turtle and check engine light displayed. The vehicle was again not able to be driven and was towed to the dealer. Chrysler engineers are now involved in the repair. I do not know if the previous camera and UConnect Box issues are related to the red turtle limp mode. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI #11609211

10,000 miles · Jul 22, 2024
Service BrakesVehicle Speed ControlCrashInjury

The contact owned a 2023 Chrysler Pacifica Hybrid. The contact stated that while driving at 35 MPH, the vehicle accelerated without the application of the accelerator pedal. The accelerator pedal depressed against the floorboard. The brake pedal was applied, but it failed to respond, and the vehicle continued to increase in spee…

Read full complaint

The contact owned a 2023 Chrysler Pacifica Hybrid. The contact stated that while driving at 35 MPH, the vehicle accelerated without the application of the accelerator pedal. The accelerator pedal depressed against the floorboard. The brake pedal was applied, but it failed to respond, and the vehicle continued to increase in speed. There were no warning lights illuminated. The contact crashed into a concrete barrier and crashed into a Ford, and another unknown van. The driver sustained an unknown injury and was taken to the hospital by ambulance to receive medical attention at the hospital. There was no reported fire. The air bags were deployed. A police report was filed. The vehicle was towed to a tow lot. The contact called the local dealer, but the vehicle was not diagnosed or repaired. The black box data showed the vehicle was traveling at 100 MPH. The passenger's side door had detached, and the windshield was shattered. The front and rear of the vehicle were shoved inward. The vehicle was deemed a total loss by the insurance company. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 10,000. The VIN was not available.

NHTSA ODI #11603753

Mileage unknown · Jul 11, 2024
EngineFuel/propulsion SystemVehicle Speed Control

Vehicle lost motive power while driving. Vehicle was new with less then 1,500 miles. After a full charge drove about 4 miles and received message "vehicle will shut down". Tried to pull into a gas station parking lot and only made it half way through the parking lot. Vehicle has been brought to dealer and a new Power Inverter …

Read full complaint

Vehicle lost motive power while driving. Vehicle was new with less then 1,500 miles. After a full charge drove about 4 miles and received message "vehicle will shut down". Tried to pull into a gas station parking lot and only made it half way through the parking lot. Vehicle has been brought to dealer and a new Power Inverter Module is being installed.

NHTSA ODI #11601153

Mileage unknown · Apr 15, 2024
Vehicle Speed Control

I engaged the speed control (NOT adaptive speed control, also equipped on this car), and set my desired speed. I pressed and held the SET+ button to increase speed, as demonstrated at 1:27 on this video [XXX] from Mopar for an older model of this vehicle. When I released the button, the car continued to accelerate. Pressing Can…

Read full complaint

I engaged the speed control (NOT adaptive speed control, also equipped on this car), and set my desired speed. I pressed and held the SET+ button to increase speed, as demonstrated at 1:27 on this video [XXX] from Mopar for an older model of this vehicle. When I released the button, the car continued to accelerate. Pressing Cancel or disabling speed control stopped the acceleration. This behavior is repeatable. I tested it several times on that drive cycle, and again on subsequent drive cycles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI #11583088

Official recalls

0

No recalls in this snapshot.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

RQ24004 · Loss Of Motive Power Due To An Internal Wiring Connector Short.

Opened Feb 27, 2024 · No close date supplied

Status: open (inferred from source dates) · Electrical System:wiring

On July 22, 2022, the Office of Defects Investigation (ODI) opened investigation PE22-008 regarding complaints alleging a loss of motive power condition potentially due to a transmission malfunction in Model Years 2019-2021 Chrysler Pacifica Plug-In Hybrid Electric Vehicles (PHEV).  On January 17, 2023, Fiat Chrysler Automobiles (FCA) issued safety recall (NHTSA Recall 23V-010) involving 2017-2023 Model Years (MY) Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016, through January 9, 2023. The recall states that the loss of motive power condition in these vehicles is caused by an internal transmission wiring connector that may short circuit, resulting in an unexpected engine shutdown.  An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.  In discussions with FCA on Recall 23V-010, ODI confirmed the recall was related to investigation PE22-008.  The remedy for 23V-010 is to update the Power Inverter module (PIM) and/or Instrument Panel Cluster (IPC) software to provide drivers a message stating “Stop Safely - Vehicle Will Shut Off Soon” followed by a chime and MIL, PRNDL blinking (on cluster and shifter knob), low SOC (State of Charge) warning and reduced power mode.  The recall remedy does not replace the defective hardware that was described in Recall 23V-010, and the wiring connector short still exists on these vehicles. To date, ODI has received 132 reports for the population of vehicles subject to recall 23V-010.  These reports allege a loss of motive power condition that reduces the vehicles speed, followed by dashboard warning lamps displaying messages associated with recall 23V-010.  The presence of these warning lamps and messages indicates the vehicle likely had the recall remedy applied. Follow up discussions with FCA confirm their remedy does not prevent a loss of motive power, but instead limits torque to the engine and after an unspecified number of miles or period of time, the engine will shut down.  When this occurs, FCA relies on the owner to transport the vehicle to a dealership after they experience a loss of motive power condition, at which time the defective hardware is replaced.  Furthermore, the dashboard messages introduced in the recall remedy may cause the driver to pull over in an unsafe location. Pulling over in an unsafe location may expose the occupants to undue harm. The Office of Defects Investigation is opening this Recall Query (RQ) to assess the adequacy, frequency, and safety consequence of the remedy for recall 23V-010.  To review the ODI reports cited in the opening resume ODI report identification number document, go to NHTSA.gov.