NHTSA owner reports · September 18, 2026 snapshot.
Electrical System complaints
341 reportsClear category filterMileage unknown · Dec 5, 2017
Electrical SystemUnknown Or Other
THE MYLINK AND RADIO KEEPS GOING OUT EEAN AFTER BEING REPLACED. THE DASHBOARD FUNCIONS ACT ERRATICALLY WITH BLINKING AND THEN RESETS THE STATISTICS. WHEN THE HORN IS KONKED THE MYLINK AND RADIO GO DEAD. THE DANGEROUS PART ID THE DASH FUNCTIONS ACTING ERRATICALLY. HOPE IT DOES NOT STALL ON MY ON THE HIGHWAY INFRONT OF A SEMIT…
Read full complaint
THE MYLINK AND RADIO KEEPS GOING OUT EEAN AFTER BEING REPLACED. THE DASHBOARD FUNCIONS ACT ERRATICALLY WITH BLINKING AND THEN RESETS THE STATISTICS. WHEN THE HORN IS KONKED THE MYLINK AND RADIO GO DEAD. THE DANGEROUS PART ID THE DASH FUNCTIONS ACTING ERRATICALLY. HOPE IT DOES NOT STALL ON MY ON THE HIGHWAY INFRONT OF A SEMIT TRUCK OR SOMETHING.
NHTSA ODI #11052516
35,000 miles · Nov 21, 2017
Electrical System
THE RADIO RANDOMLY CHANGES STATIONS ON ITS OWN AND THE TOUCH SCREEN DOESNOT WORK AT RANDOM TIMES. THE FRONT DRIVER'S AND PASSENGER'S SIDE WINDOWS GO UP AND DOWN AUTOMATICALLY AND CANNOT BE STOPPED; WHEN THE WINDOW SWITCH IS DEPRESSED UP OR DOWN, THE WINDOW WILL MAKE ONE COMPLETE CYCLE OF OPENING AND CLOSING BEFORE STOPPING IN TH…
Read full complaint
THE RADIO RANDOMLY CHANGES STATIONS ON ITS OWN AND THE TOUCH SCREEN DOESNOT WORK AT RANDOM TIMES. THE FRONT DRIVER'S AND PASSENGER'S SIDE WINDOWS GO UP AND DOWN AUTOMATICALLY AND CANNOT BE STOPPED; WHEN THE WINDOW SWITCH IS DEPRESSED UP OR DOWN, THE WINDOW WILL MAKE ONE COMPLETE CYCLE OF OPENING AND CLOSING BEFORE STOPPING IN THE DIRECTED POSITION. BOTH THESE ACTIONS OCCUR RANDOMLY AND UNSUSPECTINGLY.
NHTSA ODI #11047709
28,500 miles · Nov 11, 2017
Electrical SystemSteering
I FILED A PREVIOUS COMPLAINT, #11044339, BUT FORGOT TO ADD SOMETHING. I TOOK MY VEHICLE TO THE DEALER ON SEPT. 22,2017 FOR THE POWER STEERING RECALL ,#17276. I DON'T KNOW IF THIS IS RELATED TO THE PROBLEM , BUT THOUGHT IT MIGHT BE SOME GOOD INFORMATION TO DIVULGE.
NHTSA ODI #11045338
28,500 miles · Nov 7, 2017
Electrical SystemElectronic Stability Control (esc)Steering
WHILE ON THE HIGHWAY A STABILITRACK WARNING APPEARED ON THE DASH STATING IT MIGHT AFFECT POWER STEERING ASSIST. THIS CAME ON SEVERAL TIMES. THEN WITH THE CRUISE CONTROL ON AND SIGNALING A LANE CHANGE THE CRUISE WAS CANCELLED. THIS ALSO OCCURRED SEVERAL TIMES. IT ALSO APPEARED THAT THE DASH LIGHTS FLICKERED ,BUT I WASN'T SURE BE…
Read full complaint
WHILE ON THE HIGHWAY A STABILITRACK WARNING APPEARED ON THE DASH STATING IT MIGHT AFFECT POWER STEERING ASSIST. THIS CAME ON SEVERAL TIMES. THEN WITH THE CRUISE CONTROL ON AND SIGNALING A LANE CHANGE THE CRUISE WAS CANCELLED. THIS ALSO OCCURRED SEVERAL TIMES. IT ALSO APPEARED THAT THE DASH LIGHTS FLICKERED ,BUT I WASN'T SURE BECAUSE OF THE SUNLIGHT . LATER THAT EVENING I WAS MAKING A TURN ON A CITY STREET WHEN THE DASH LIGHTS WENT COMPLETELY OUT AND I HAD NO POWER STEERING. THIS LASTED ABOUT 2 SECONDS BEFORE EVERYTHING CAME BACK ON. AFTER THAT EPISODE IT HASN'T HAPPENED SINCE. AFTER READING OTHER SIMILAR COMPLAINTS I AM CONCERNED IT COULD HAPPEN AGAIN AND COULD RESULT IN A CRASH. IT SEEMS THAT WHEN THE CRUISE WAS CANCELLED WHEN SIGNALING THE LANE CHANGE, THAT IF I PUSHED UP OR DOWN ON THE TURN SIGNAL LEVER AT THE END OF THE LEVER IT WOULD CANCEL THE CRUISE CONTROL. I TRIED PUSHING DOWN ON THE LEVER CLOSER TO THE STEERING COLUMN AND THAT DIDN'T CANCEL OUT THE CRUISE CONTROL. I DON'T KNOW IF IT WAS JUST A COINCIDENCE OR IT JUST WASN'T MALFUNCTIONING AT THE TIME.
NHTSA ODI #11044339
42,000 miles · Oct 27, 2017
Electrical SystemSteeringWheelsCrash
POWER STEERING FAILURE CAUSED ACCIDENT, IT HAS BEEN FIVE MONTHS AND THEY HAVE DONE NOTHING
NHTSA ODI #11040391
72,000 miles · Oct 5, 2017
Electrical SystemEngineSteering
I HAVE BEEN NOTICING SOME SERIOUS ELECTRICAL ISSUES IN THE LAST FEW WEEKS WITH MY 2014 SILVERADO 1500. IT STARTED WITH THE "ANTI-THEFT DETTERENT" SYSTEM ACTING UP AND NOT ALLOWING ME TO START THE CAR. AFTER FLIPPING THE KEY A FEW TIMES, IT WENT AWAY. THEN THE PROBLEM PROGRESSED TO WHEN TURNING THE KEY IT WAS IF THE BATTERY WA…
Read full complaint
I HAVE BEEN NOTICING SOME SERIOUS ELECTRICAL ISSUES IN THE LAST FEW WEEKS WITH MY 2014 SILVERADO 1500. IT STARTED WITH THE "ANTI-THEFT DETTERENT" SYSTEM ACTING UP AND NOT ALLOWING ME TO START THE CAR. AFTER FLIPPING THE KEY A FEW TIMES, IT WENT AWAY. THEN THE PROBLEM PROGRESSED TO WHEN TURNING THE KEY IT WAS IF THE BATTERY WAS DEAD. EVERYTHING WOULD GO BLACK (LIGHTS, INFO CENTER, DIC, ETC). AFTER A FEW MINUTES OF SITTING, I COULD TURN THE KEY AND IT WOULD START UP NO PROBLEMS. THEN IT ALL JUST WENT AWAY FOR ABOUT 2 WEEKS. THEN JUST A FEW DAYS AGO, I WAS TURNING INTO A SHOPPING CENTER AND THE TRUCK JUST DIED. THE DASH, THE LIGHTS, THE ENGINE, EVERYTHING. I NEARLY TOOK OUT THE ENTRANCE SIGN OF THE PARKING LOT. HANGING WITH MY BACK END IN TRAFFIC I QUICKLY POPPED IT NEUTRAL, RESTARTED THE TRUCK, AND PULLED IN. I COULDN'T RECREATE THE PROBLEM. I DROVE TO AUTOZONE AND HAD THEM CHECK THE BATTERY AND ALTERNATOR. EVERYTHING WAS FINE. ABOUT AN HOUR LATER, IN THE DRIVE THRU AT CHICK FIL A, I PLACED THE CAR IN PARK, RECEIVED MY FOOD, AND AS SOON AS I SHIFTED OUT OF PARK THE TRUCK DIED AGAIN, ALONG WITH THE DASH AND EVERYTHING ELSE. RESTARTED AND DROVE HOME. I SPENT ABOUT 30 MINS DRIVING AROUND THE BLOCK AND SITTING IN THE DRIVEWAY TRYING TO RECREATE THE PROBLEM. I HAVE YET TO RECREATE.
NHTSA ODI #11031849
40,000 miles · Oct 4, 2017
Electrical System
TL* THE CONTACT OWNS A 2014 CHEVROLET SILVERADO 1500. WHILE DRIVING APPROXIMATELY 5 MPH, THE AIR CONDITIONER FAILED TO FUNCTION. THE VEHICLE WAS TAKEN TO SISBARRO BUICK GMC (425 W BOUTZ RD, LAS CRUCES, NM 88005, PHONE NUMBER: (800) 215-8021) WHERE IT WAS DIAGNOSED THAT THE FREON LINE HAD A HOLE COMING FROM THE CONDENSER AND NEED…
Read full complaint
TL* THE CONTACT OWNS A 2014 CHEVROLET SILVERADO 1500. WHILE DRIVING APPROXIMATELY 5 MPH, THE AIR CONDITIONER FAILED TO FUNCTION. THE VEHICLE WAS TAKEN TO SISBARRO BUICK GMC (425 W BOUTZ RD, LAS CRUCES, NM 88005, PHONE NUMBER: (800) 215-8021) WHERE IT WAS DIAGNOSED THAT THE FREON LINE HAD A HOLE COMING FROM THE CONDENSER AND NEEDED TO BE REPLACED. THE DEALER INFORMED THE CONTACT THAT THE VEHICLE HAD A DESIGN FLAW AND WAS WAITING FOR A BRACKET THAT GOES TO THE LINE FROM THE COMPRESSOR. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND REFERRED THE CONTACT TO NHTSA. THE APPROXIMATE FAILURE MILEAGE WAS 40,000.
NHTSA ODI #11031786
69,000 miles · Sep 30, 2017
Electrical SystemElectronic Stability Control (esc)Steering
WHILE IN MOTION AND TURNING THE TRUCK LOSES POWER AND STEERING AND SAYS STABILITRACK NEEDS SERVICE THEN THE TRUCK LOST ALL POWER AND COULD NOT BE RESTARTED. HAD THE TRUCK JUMPED AND WHILE DRIVING THE AC WENT OUT AND THE STABILITRACK WARNING CAME ON AND THE STEERING BECAME JERKY AND DIFFICULT. ONCE PARKED AND SHUT OFF THE TRUCK W…
Read full complaint
WHILE IN MOTION AND TURNING THE TRUCK LOSES POWER AND STEERING AND SAYS STABILITRACK NEEDS SERVICE THEN THE TRUCK LOST ALL POWER AND COULD NOT BE RESTARTED. HAD THE TRUCK JUMPED AND WHILE DRIVING THE AC WENT OUT AND THE STABILITRACK WARNING CAME ON AND THE STEERING BECAME JERKY AND DIFFICULT. ONCE PARKED AND SHUT OFF THE TRUCK WILL AGAIN NOT START.
NHTSA ODI #11030668
42,000 miles · Sep 18, 2017
Electrical SystemElectronic Stability Control (esc)Steering
WHILE DRIVING MY 2014 CHEVY SILVERADO AROUND 42000 MILES I STOPPED AT A LIGHT ON A HIGHWAY AND LOST ALL ELECTRICAL POWER AND THE SERVICE STEERING ASSIST CAME ON DASH. I WAS ABLE TO RESTART THE TRUCK AND GO. IT HAPPENED MULTIPLE TIMES. WHILE DRIVING IT AROUND A BEND ON A HIGHWAY THE TRUCK SHUT OFF I LOST ALL STEERING THE STEERI…
Read full complaint
WHILE DRIVING MY 2014 CHEVY SILVERADO AROUND 42000 MILES I STOPPED AT A LIGHT ON A HIGHWAY AND LOST ALL ELECTRICAL POWER AND THE SERVICE STEERING ASSIST CAME ON DASH. I WAS ABLE TO RESTART THE TRUCK AND GO. IT HAPPENED MULTIPLE TIMES. WHILE DRIVING IT AROUND A BEND ON A HIGHWAY THE TRUCK SHUT OFF I LOST ALL STEERING THE STEERING LOCKED UP AND I ALMOST CRASHED, THE SERVICE ASSIST LIGHT CAME ON AGAIN. THIS HAPPENED MULTIPLE TIMES WHEN TURNING. ON 4-13-17 I BROUGHT THE TRUCK TO A CHEVY DEALER IT WAS WAS STILL UNDER WARRANTY. THEY COULD NOT REPRODUCE THE PROBLEM. 8-24-17 I BROUGHT THE TRUCK IN FOR A RECALL #17276 FOR REPROGRAMMING THE POWER STEERING ASSIST CONTROL MODULAR. AFTER THE RECALL THE TRUCK STARTED DOING IT MORE OFTEN THE SAME DAY BUT THE STEERING DID NOT LOCK UP BUT THE TRUCK SHUT OFF WHEN I TRIED MAKING A TURN ON A HIGHWAY. THE SERVICE STEERING ASSIST LIGHT CAME ON AGAIN. ON 9-7-17 I BROUGHT THE TRUCK BACK TO THE CHEVY DEALER ( CHEVY DEALER NOW CHANGED ITS NAME FROM OASIS TO QUALITY ) COMPLAINING THAT THE RECALL DID NOT WORK. THEY SAID THAT THE RECALL WAS NOT FOR THAT. BUT I BELIEVE IT IS THE SAME PROBLEM. THEY CHEVY DEALER DROVE THE TRUCK FOR 10 MILES AND IT HAPPENED TO THEM.THEY CHARGED ME FOR THE TIME TO TROUBLE SHOOT THE PROBLEM AND FOUND A LOOSE GROUND WIRE #G218 UNDER THE DASH CAUSING THE PROBLEM. I HAVE DRIVING THE TRUCK FOR 2 DAYS NOW AND IT SEEMS FINE. THE ISSUE IS THAT THEY MADE ME PAY FOR SOMETHING THEY SHOULD HAVE FIXED THE FIRST TIME AND I BELIEVE THAT THIS SHOULD HAVE BEEN PART OF RECALL # 17276, BECAUSE I BELIEVE PART OF RECALL #17276 HAD TO DO WITH LOW VOLTAGE TO THE STEERING MODULAR. A LOOSE GROUND WILL GIVE YOU LOW VOLTAGE. ANY WAY THIS IS VERY DANGEROUS AND I HAVE READ ONLINE OF OTHERS HAVING THE SAME PROBLEM. PLEASE MAKE A RECALL ABOUT THIS LOOSE GROUND WIRE THAT MAKES THE TRUCK SHUT OFF AND LOSE STEERING BEFORE SOMEONE DIES. THANK YOU
NHTSA ODI #11024008
43,000 miles · Sep 18, 2017
Electrical SystemSteering
TL* THE CONTACT OWNS A 2014 CHEVROLET SILVERADO 1500. WHILE DRIVING 5 MPH, THE POWER STEERING AND INSTRUMENT PANEL LIGHTING FAILED. IN ADDITION, THE HEADLIGHTS FLICKERED RAPIDLY AND THE VEHICLE STALLED. THE VEHICLE RESTARTED AFTER ONE ATTEMPT. THE VEHICLE WAS TAKEN TO AN UNKNOWN DEALER WHERE THE CAUSE OF THE FAILURE COULD NOT BE…
Read full complaint
TL* THE CONTACT OWNS A 2014 CHEVROLET SILVERADO 1500. WHILE DRIVING 5 MPH, THE POWER STEERING AND INSTRUMENT PANEL LIGHTING FAILED. IN ADDITION, THE HEADLIGHTS FLICKERED RAPIDLY AND THE VEHICLE STALLED. THE VEHICLE RESTARTED AFTER ONE ATTEMPT. THE VEHICLE WAS TAKEN TO AN UNKNOWN DEALER WHERE THE CAUSE OF THE FAILURE COULD NOT BE DETERMINED. THE VIN WAS INCLUDED IN NHTSA CAMPAIGN NUMBER: 17V414000 (STEERING). THE VEHICLE WAS TAKEN TO CHUCK NICHOLSON AUTO (7190 OH-39, MILLERSBURG, OH 44654) WHERE THE RECALL REPAIR WAS PERFORMED, BUT THE FAILURE RECURRED. THE MANUFACTURER WAS AWARE OF THE FAILURE AND OPENED CASE NUMBER: 8-3308180719. THE CONTACT WAS INFORMED THAT SOMEONE WOULD BE IN CONTACT WITH HIM. THE FAILURE MILEAGE WAS APPROXIMATELY 43,000.
NHTSA ODI #11023923
Official recalls
6Apr 8, 2021
General Motors, LLC (GM) is recalling certain 2014-2016 Chevrolet Silverado 1500, 2015-2016 Chevrolet Tahoe, and 2014-2015 GMC Sierra 1500 vehicles that may have received an incorrect replacement tensioner cable assembly as part of a previous recall remedy or a subsequent repair. The flexible steel cable connecting the driver's seat belt to the outboard side of the seat may be repeatedly bent over the seat side shield as the driver enters and exits the vehicle causing the cable to fatigue and separate.
Consequence & remedy
Consequence: A broken pretensioner cable reduces the effectiveness of the driver's seat belt, increasing the risk of injury.
Remedy: GM will notify owners, and dealers will replace the driver seat belt lap pretensioner, free of charge. The recall began on May 5, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020, and GMC customer service at 1-800-462-8782. GM's number for this recall is N212330040.
Oct 24, 2019
General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.
Consequence & remedy
Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.
Additional source detail variants (3)
Service Brakes
General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.
Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.
Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:wheel Speed Sensor/tone Ring
General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.
Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.
Electronic Stability Control (esc)
General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive. If a wheel-speed sensor fails, while the vehicle is traveling between 41 and 60 mph in four-wheel or automatic mode, the Electronic-Brake Control Module (EBCM) software may activate the driveline-protection system.
Consequence: Unintended activation of the driveline-protection system will cause unintended braking on the wheel on the opposite side of the failed sensor, causing the vehicle to pull to one side unexpectedly, increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192261050.
Sep 6, 2019
General Motors LLC (GM) is recalling certain 2015-2017 Cadillac Escalade, 2014-2018 Chevrolet Silverado, GMC Sierra, 2015-2018 Chevrolet Suburban, Tahoe, GMC Yukon vehicles. The amount of vacuum created by the vacuum pump may decrease over time.
Consequence & remedy
Consequence: As the vacuum level drops, the brake assist decreases, increasing braking effort, extending the distance required to stop the vehicle, thereby increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will reprogram the Electronic Brake Control Module, free of charge. The recall began October 8, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438, Cadillac customer service at 1-800-458-8006 or GMC customer service at 1-800-462-8782. GM's number for this recall is N192268490.
Jul 10, 2017
General Motors LLC (GM) is recalling certain model year 2014-2016 Buick Lacrosse and Chevrolet Spark EV, Caprice PPV and SS vehicles, 2014-2017 Buick Encore and Chevrolet Corvette, Silverado 1500 and GMC Sierra 1500 vehicles, 2015-2016 Cadillac Escalade and Escalade ESV, Chevrolet Tahoe, Trax, Suburban and Silverado 2500 and 3500 and GMC Yukon and Yukon XL vehicles, and 2015-2017 GMC Sierra HD 2500 and 3500 vehicles. While being previously remedied for recall 16V-651, the affected vehicles may not have received the complete software update necessary to remedy the recall condition. Without the update, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence & remedy
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on August 4, 2017. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 17287.
Additional source detail variants (3)
Seat Belts:pretensioner
General Motors LLC (GM) is recalling certain model year 2014-2016 Buick Lacrosse and Chevrolet Spark EV, Caprice PPV and SS vehicles, 2014-2017 Buick Encore and Chevrolet Corvette, Silverado 1500 and GMC Sierra 1500 vehicles, 2015-2016 Cadillac Escalade and Escalade ESV, Chevrolet Tahoe, Trax, Suburban and Silverado 2500 and 3500 and GMC Yukon and Yukon XL vehicles, and 2015-2017 GMC Sierra HD 2500 and 3500 vehicles. While being previously remedied for recall 16V-651, the affected vehicles may not have received the complete software update necessary to remedy the recall condition. Without the update, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on August 4, 2017. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 17287.
Air Bags:frontal:sensor/control MODULE-INACTIVE
General Motors LLC (GM) is recalling certain model year 2014-2016 Buick Lacrosse and Chevrolet Spark EV, Caprice PPV and SS vehicles, 2014-2017 Buick Encore and Chevrolet Corvette, Silverado 1500 and GMC Sierra 1500 vehicles, 2015-2016 Cadillac Escalade and Escalade ESV, Chevrolet Tahoe, Trax, Suburban and Silverado 2500 and 3500 and GMC Yukon and Yukon XL vehicles, and 2015-2017 GMC Sierra HD 2500 and 3500 vehicles. While being previously remedied for recall 16V-651, the affected vehicles may not have received the complete software update necessary to remedy the recall condition. Without the update, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on August 4, 2017. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 17287.
Air Bags:frontal
General Motors LLC (GM) is recalling certain model year 2014-2016 Buick Lacrosse and Chevrolet Spark EV, Caprice PPV and SS vehicles, 2014-2017 Buick Encore and Chevrolet Corvette, Silverado 1500 and GMC Sierra 1500 vehicles, 2015-2016 Cadillac Escalade and Escalade ESV, Chevrolet Tahoe, Trax, Suburban and Silverado 2500 and 3500 and GMC Yukon and Yukon XL vehicles, and 2015-2017 GMC Sierra HD 2500 and 3500 vehicles. While being previously remedied for recall 16V-651, the affected vehicles may not have received the complete software update necessary to remedy the recall condition. Without the update, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on August 4, 2017. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 17287.
Jun 29, 2017
General Motors LLC (GM) is recalling certain 2014 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. The vehicles may have a temporary loss of electric power steering (EPS) assist, especially during low-speed turning maneuvers.
Consequence & remedy
Consequence: If EPS assist is lost and then returns, the driver might lose temporary control of the steering wheel, increasing the risk of a crash.
Remedy: GM will notify owners, and dealers will update the EPS module software, free of charge. The recall began on August 10, 2017. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-800-432-8782. GM's number for this recall is 17276.
Sep 8, 2016
General Motors LLC (GM) is recalling certain model year 2015-2017 Chevrolet Silverado 2500 HD, 3500 HD, Tahoe, Suburban, GMC Sierra 2500 HD and 3500 HD, GMC Yukon, GMC Yukon XL, Cadillac Escalade and Cadillac Escalade ESV vehicles and 2014-2017 Chevrolet Corvette, Silverado 1500, Trax, Caprice Police Pursuit Vehicle, GMC Sierra 1500, Buick Encore, and 2014-2016 Buick Lacrosse, Chevrolet Spark EV and SS vehicles. In the affected vehicles, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence & remedy
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on October 13, 2016. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 16007.
Additional source detail variants (3)
Seat Belts:pretensioner
General Motors LLC (GM) is recalling certain model year 2015-2017 Chevrolet Silverado 2500 HD, 3500 HD, Tahoe, Suburban, GMC Sierra 2500 HD and 3500 HD, GMC Yukon, GMC Yukon XL, Cadillac Escalade and Cadillac Escalade ESV vehicles and 2014-2017 Chevrolet Corvette, Silverado 1500, Trax, Caprice Police Pursuit Vehicle, GMC Sierra 1500, Buick Encore, and 2014-2016 Buick Lacrosse, Chevrolet Spark EV and SS vehicles. In the affected vehicles, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on October 13, 2016. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 16007.
Air Bags:frontal:sensor/control MODULE-INACTIVE
General Motors LLC (GM) is recalling certain model year 2015-2017 Chevrolet Silverado 2500 HD, 3500 HD, Tahoe, Suburban, GMC Sierra 2500 HD and 3500 HD, GMC Yukon, GMC Yukon XL, Cadillac Escalade and Cadillac Escalade ESV vehicles and 2014-2017 Chevrolet Corvette, Silverado 1500, Trax, Caprice Police Pursuit Vehicle, GMC Sierra 1500, Buick Encore, and 2014-2016 Buick Lacrosse, Chevrolet Spark EV and SS vehicles. In the affected vehicles, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on October 13, 2016. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 16007.
Air Bags:frontal
General Motors LLC (GM) is recalling certain model year 2015-2017 Chevrolet Silverado 2500 HD, 3500 HD, Tahoe, Suburban, GMC Sierra 2500 HD and 3500 HD, GMC Yukon, GMC Yukon XL, Cadillac Escalade and Cadillac Escalade ESV vehicles and 2014-2017 Chevrolet Corvette, Silverado 1500, Trax, Caprice Police Pursuit Vehicle, GMC Sierra 1500, Buick Encore, and 2014-2016 Buick Lacrosse, Chevrolet Spark EV and SS vehicles. In the affected vehicles, certain driving conditions may cause the air bag sensing and diagnostic module (SDM) software to activate a diagnostic test. During this test, deployment of the frontal air bags and the seat belt pretensioners would not occur in the event of a crash.
Consequence: A failure of the front air bags or seat belt pretensioners to deploy in the event of a crash necessitating deployment increases the risk of injury to the driver and front passenger.
Remedy: GM will notify owners, and dealers will reflash the SDM software. Vehicles that have had a previous air bag deployment will have the SDM replaced. These repairs will be performed free of charge. The recall began on October 13, 2016. Owners may contact Buick customer service at 1-800-521-7300, Cadillac customer service at 1-800-458-8006, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is 16007.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
PE18012 · Brake Vacuum Pump Failure
Opened Nov 20, 2018 · Closed Apr 10, 2022
Status: closed (inferred from source dates) · Service Brakes; Service Brakes, Hydraulic; Service Brakes, Hydraulic:power Assist:vacuum
On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the brake assist vacuum pump in model year (MY) 2014 through 2016 GMC Sierra 1500 and Chevrolet Silverado 1500 series pickup trucks and MY 2015 through 2016 Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe, and GMC Yukon SUVs.If the brake assist vacuum pump fails to operate as intended, the amount of brake power assist supplied to the driver can be significantly reduced, extending the subject vehicle stopping distance. GM stated that the root cause of pump failures was due to foreign debris such as oil sludge in the engine oil. GM stated that this debris can become trapped by the oil inlet filter screen. Under normal operation, this screen allows a small amount of oil into the brake vacuum pump. The foreign debris can, over time, clog the pump which can cause a loss of lubrication and a reduction in the amount of vacuum produced leading to a hard pedal and extended stopping distance.On December 13, 2018, GM issued a Special Coverage (N182202780) for the brake vacuum pump issue in MY 2014-2017 trucks and 2015-2017 SUVs on the K2XX platform for 6 years or 72,000 miles. Special Coverage repair includes the replacement of the vacuum pump and vacuum pump belt. Consumers received notification of the coverage via mail. On September 6, 2019, GM notified NHTSA that it was conducting safety recall 19V-645 which reprograms the electronic brake control module (EBCM) and included approximately 3.5 million trucks and SUVs. In October 2019, GM extended the terms of special coverage N182202780 to 10 years or 150,000 miles as well as now including the entire scope of recall 19V-645. In October 2020, GM expanded the scope of coverage N182202780 to include the MY 2018 Escalade and 2019 Tahoe.The remedy implemented in GM recall 19V-645 appears to be sufficient in addressing the safety-related concerns of this issue. Loss of vacuum assist now occurs at a progressive rate as well as there being a more timely warning of a brake problem to the driver through the driver information center (DIC). In view of the recall action and revision to the special coverage, this Preliminary Evaluation is closed. The agency reserves the right to take additional action if warranted by new circumstances. The ODI reports cited above are available for review online at NHTSA.gov under the identification numbers in the attached document.
Additional source detail variants (3)
Service Brakes
On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the brake assist vacuum pump in model year (MY) 2014 through 2016 GMC Sierra 1500 and Chevrolet Silverado 1500 series pickup trucks and MY 2015 through 2016 Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe, and GMC Yukon SUVs.If the brake assist vacuum pump fails to operate as intended, the amount of brake power assist supplied to the driver can be significantly reduced, extending the subject vehicle stopping distance. GM stated that the root cause of pump failures was due to foreign debris such as oil sludge in the engine oil. GM stated that this debris can become trapped by the oil inlet filter screen. Under normal operation, this screen allows a small amount of oil into the brake vacuum pump. The foreign debris can, over time, clog the pump which can cause a loss of lubrication and a reduction in the amount of vacuum produced leading to a hard pedal and extended stopping distance.On December 13, 2018, GM issued a Special Coverage (N182202780) for the brake vacuum pump issue in MY 2014-2017 trucks and 2015-2017 SUVs on the K2XX platform for 6 years or 72,000 miles. Special Coverage repair includes the replacement of the vacuum pump and vacuum pump belt. Consumers received notification of the coverage via mail. On September 6, 2019, GM notified NHTSA that it was conducting safety recall 19V-645 which reprograms the electronic brake control module (EBCM) and included approximately 3.5 million trucks and SUVs. In October 2019, GM extended the terms of special coverage N182202780 to 10 years or 150,000 miles as well as now including the entire scope of recall 19V-645. In October 2020, GM expanded the scope of coverage N182202780 to include the MY 2018 Escalade and 2019 Tahoe.The remedy implemented in GM recall 19V-645 appears to be sufficient in addressing the safety-related concerns of this issue. Loss of vacuum assist now occurs at a progressive rate as well as there being a more timely warning of a brake problem to the driver through the driver information center (DIC). In view of the recall action and revision to the special coverage, this Preliminary Evaluation is closed. The agency reserves the right to take additional action if warranted by new circumstances. The ODI reports cited above are available for review online at NHTSA.gov under the identification numbers in the attached document.
Service Brakes, Hydraulic
On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the brake assist vacuum pump in model year (MY) 2014 through 2016 GMC Sierra 1500 and Chevrolet Silverado 1500 series pickup trucks and MY 2015 through 2016 Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe, and GMC Yukon SUVs.If the brake assist vacuum pump fails to operate as intended, the amount of brake power assist supplied to the driver can be significantly reduced, extending the subject vehicle stopping distance. GM stated that the root cause of pump failures was due to foreign debris such as oil sludge in the engine oil. GM stated that this debris can become trapped by the oil inlet filter screen. Under normal operation, this screen allows a small amount of oil into the brake vacuum pump. The foreign debris can, over time, clog the pump which can cause a loss of lubrication and a reduction in the amount of vacuum produced leading to a hard pedal and extended stopping distance.On December 13, 2018, GM issued a Special Coverage (N182202780) for the brake vacuum pump issue in MY 2014-2017 trucks and 2015-2017 SUVs on the K2XX platform for 6 years or 72,000 miles. Special Coverage repair includes the replacement of the vacuum pump and vacuum pump belt. Consumers received notification of the coverage via mail. On September 6, 2019, GM notified NHTSA that it was conducting safety recall 19V-645 which reprograms the electronic brake control module (EBCM) and included approximately 3.5 million trucks and SUVs. In October 2019, GM extended the terms of special coverage N182202780 to 10 years or 150,000 miles as well as now including the entire scope of recall 19V-645. In October 2020, GM expanded the scope of coverage N182202780 to include the MY 2018 Escalade and 2019 Tahoe.The remedy implemented in GM recall 19V-645 appears to be sufficient in addressing the safety-related concerns of this issue. Loss of vacuum assist now occurs at a progressive rate as well as there being a more timely warning of a brake problem to the driver through the driver information center (DIC). In view of the recall action and revision to the special coverage, this Preliminary Evaluation is closed. The agency reserves the right to take additional action if warranted by new circumstances. The ODI reports cited above are available for review online at NHTSA.gov under the identification numbers in the attached document.
Service Brakes, Hydraulic:power Assist:vacuum
On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the brake assist vacuum pump in model year (MY) 2014 through 2016 GMC Sierra 1500 and Chevrolet Silverado 1500 series pickup trucks and MY 2015 through 2016 Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe, and GMC Yukon SUVs.If the brake assist vacuum pump fails to operate as intended, the amount of brake power assist supplied to the driver can be significantly reduced, extending the subject vehicle stopping distance. GM stated that the root cause of pump failures was due to foreign debris such as oil sludge in the engine oil. GM stated that this debris can become trapped by the oil inlet filter screen. Under normal operation, this screen allows a small amount of oil into the brake vacuum pump. The foreign debris can, over time, clog the pump which can cause a loss of lubrication and a reduction in the amount of vacuum produced leading to a hard pedal and extended stopping distance.On December 13, 2018, GM issued a Special Coverage (N182202780) for the brake vacuum pump issue in MY 2014-2017 trucks and 2015-2017 SUVs on the K2XX platform for 6 years or 72,000 miles. Special Coverage repair includes the replacement of the vacuum pump and vacuum pump belt. Consumers received notification of the coverage via mail. On September 6, 2019, GM notified NHTSA that it was conducting safety recall 19V-645 which reprograms the electronic brake control module (EBCM) and included approximately 3.5 million trucks and SUVs. In October 2019, GM extended the terms of special coverage N182202780 to 10 years or 150,000 miles as well as now including the entire scope of recall 19V-645. In October 2020, GM expanded the scope of coverage N182202780 to include the MY 2018 Escalade and 2019 Tahoe.The remedy implemented in GM recall 19V-645 appears to be sufficient in addressing the safety-related concerns of this issue. Loss of vacuum assist now occurs at a progressive rate as well as there being a more timely warning of a brake problem to the driver through the driver information center (DIC). In view of the recall action and revision to the special coverage, this Preliminary Evaluation is closed. The agency reserves the right to take additional action if warranted by new circumstances. The ODI reports cited above are available for review online at NHTSA.gov under the identification numbers in the attached document.
Illustration