2017 Chevrolet Colorado

TL* THE CONTACT OWNS A 2017 CHEVROLET COLORADO. WHILE AT A STOP SIGN AND APPLYING THE BRAKE PEDAL, AN ABNORMAL RUMBLING NOISE WAS HEARD. THERE WERE NO WARNING INDICATORS ILLUMINATED. THE VEHICLE WAS TAKEN TO A LOCAL DEALER (SIMMS CHEVROLET, 4220 W. VIENNA ROAD, P.O. BOX 340, CLIO, MI 48420) WHERE IT WAS DIAGNOSED THAT THE VEHICLE WAS WORKING AS DESIGNED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED AND OPENED CASE NUMBER: [XXX]. THE MANUFACTURER REFERRED THE CONTACT TO A LOCAL DEALER (SUSKI CHEVROLET/BUICK, 8700 MAIN ST, BIRCH RUN, MI 48415) WHERE IT WAS DIAGNOSED, BUT THE FAILURE COULD NOT BE IDENTIFIED. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 6,054. *TT INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TT

IN COLD TEMPERATURES THAT THE NORTHERN STATES EXPERIENCE (AROUND 4 DEGREES F) THE TRUCK WILL INTERMITTENTLY DIE IN THE MIDDLE OF THE ROAD WHILE DRIVING. COMPLETE POWER LOSS WITH NO WARNING, WHICH SEEMS TO HAPPEN AT ANY TIME. WHEN THE WEATHER IS ABOVE 10F CONSISTENTLY IT SEEMS THERE ARE NO ISSUES. EXTREMELY DANGEROUS AND CAN LEAVE YOU SUDDENLY WITHOUT POWER WHILE DRIVING.

AFTER ABOUT 600-700 MILES ON NEW VEHICLE, AFTER TRUCK SITS OVERNIGHT WHEN FIRST STARTED YOU COULD FEEL WHAT SEEMS TO BE THE THE TORQUE CONVERTER WAS ENGAGING AS IT THE TRANSMISSION HAD LOST PRESSURE. THEN WHILE DRIVING ANYWHERE BETWEEN 40-65MPH CONVERTER SEEM TO BE UNLOCKING AND LOCKING WHICH CAUSE A VERY BAD SHUTTER AS IF YOU WERE DRIVING OVER BRICKS, AND THEN WHEN COMING TO A STOP THE TRANSMISSION DOWN SHIFTED INTO 1ST GEAR VERY VERY HARD, WHICH IS HARD ON THE DRIVE LINE. TOOK BACK TO DEALER THEY KEEP IT 3 DAYS AND FLUSHED TRANS FLUID WITH A NEW SPECIAL FLUID. THE SHUTTERING HAS STOPPED BUT THE OTHER 2 PROBLEMS REMAIN, SO I'M THINKING NOW THEY'LL HAVE TO CHANGE THE CONVERTER OUT.

THE PROBLEM WITH MY CHEVROLET COLORADO 2017 TRUCK STARTED WITH WHEN THE NEW TRUCK BARLEY HAD UNDER 200 MILES ON ITS ODOMETER. THE ISSUE IS THE TRUCK STARTS TO VIBRATED AT A SPEED OF 50-55 MPH LIKE IF YOU ARE GOING THRU SPEED BUMPS AND THE NOISE STOPS WHEN YOU GO OVER 60 MILES PER HOUR. I HAVE DONE A SIMPLE 20 MINUTE RESERCH AND HAVE FOUND OUT THAT THERE ARE OTHER INDIVIDUALS THAT HAVE HAD THE SAME ISSUE WITH THEIR SAME YEAR COLORADO TRUCK'S. I TOOK MY TRUCK TO THE DEALERSHIP WHERE I BOUGHT THE TRUCK. THEY KNEW EXACTLY WHAT THE ISSUE WAS. THEY ARE IN THE PROCESS OF REPLACING THE TORQUE CONVERTER. LOOKS LIKE A MAJOR CONCERN TO ME.

I OWN A 2017 CHEVY COLORADO Z71 4X4. ONCE BACK ON THE HIGHWAY AFTER OFF-ROADING ON THE BEACH, WHILE FORWARD DRIVING AT ROUGHLY 50 MPH I RAN OVER A CHOPPED PIECE OF FIRE WOOD IN THE ROAD. THE PIECE OF WOOD CONTACTED THE SKID PLATE, WHICH THEN COLLAPSED THE HOLLOW SKID PLATE BRACKET WELDED TO THE FRONT CROSS SECTION/AXLE OF THE CHASSIS, WHICH THEN FLATTENED INTO THE PLASTIC POWER STEERING MODULE(S) CONNECTED TO THE ELECTRIC POWER STEERING (EPS) RACK. THIS CAUSED IMMEDIATE LOSS OF POWER STEERING, LOSS OF ABS VEHICLE CONTROL, LOSS OF ELECTRICAL CHARGE FROM THE ALTERNATOR TO THE BATTERY, LOSS OF ABILITY OF THE VEHICLE TO SHOW CORRECT SPEED, RANDOM TRANSMISSION SHIFTING (INTO AND OUT OF GEARS, AS WELL AS THROWING VEHICLE INTO NEUTRAL) AS WELL AS INTERMITTENT LOSS OF ALL CABIN ELECTRONICS (INCLUDING TACHOMETER RELAYING SPEED AND RPMS, ODOMETER, FUEL GAUGE, BATTERY VOLTAGE GAUGE, ETC.). DUE TO THIS BEING A ROAD HAZARD INCIDENT, AS WELL AS POOR MANUFACTURER DESIGN/PLACEMENT OF A PLASTIC ELECTRIC POWER STEERING RACK, I WAS FORCED TO HAVE THE VEHICLE TOWED AND FILE A CLAIM WITH MY INSURANCE COMPANY. REPAIRS HAVE BEEN ONGOING FOR 3 WEEKS AND ARE STILL INCOMPLETE AS THE VEHICLE'S COMPUTER CANNOT RECOGNIZE THE NEW OEM PART. ATTACHED PHOTOS SHOW DAMAGE WITH THE SKID PLATE REMOVED. MATHEMATICAL MEASUREMENTS WILL PROVE THE COLLAPSIBLE BRACKET, IF FLATTENED IN A SIMILAR DIRECTIONAL MANNER, WILL MOST DEFINITELY MAKE CONTACT WITH AND IMPACT THE ELECTRIC POWER STEERING RACK. THIS PLASTIC RACK ALSO INCLUDES OTHER MODULES THAT IMPACT THE AFOREMENTIONED PERFORMANCE ISSUES. GM HAS FAILED TO ACKNOWLEDGE MY CONCERN OF DESIGN AFTER MULTIPLE ATTEMPTS AND CONACT WITH THEIR

THE AUTO HEADLIGHT FUNCTION CHANGES THE INSTRUMENT PANEL LIGHTS TO DIM WHEN DRIVING. EXAMPLE: AT 4 O'CLOCK PM YOUR DRIVING EAST. THE SUN IS SETTING TOWARDS THE WEST SO THE LIGHT SENSOR ON THE DASH THAT CONTROLS THE AUTO HEADLIGHT FUNCTION DOESN'T SEE THE SUN DIRECTLY THINKS IT'S DARK OUTSIDE AND TURNS THE HEADLIGHTS ON. WHEN THIS HAPPENS THE INSTRUMENT PANEL LIGHTS GO DIM BECAUSE YOU HAVE SET THE DIM CONTROL THE PREVIOUS NIGHT TO A LOWER LEVEL THAT IS NOT BRIGHT AND DISTRACTING TO YOUR NIGHT TIME DRIVING. WHEN THIS HAPPENS YOU HAVE TO PHYSICALLY TAKE YOUR EYES OFF THE ROAD TO ADJUST THE DIM CONTROL SWITCH SO THE INSTRUMENT PANEL LIGHT IS BRIGHT ENOUGH DURING THE DAYLIGHT HOUR TO SEE AND READ THE INSTRUMENT PANEL. ALSO IT CAN BE 12 NOON WITH OVERCAST SKY'S OUTSIDE AND THE SENSOR CAN NOT TELL THAT IT IS NOT DARK OUTSIDE. THIS IS A HAZARDOUS AND SAFETY CONCERN DUE TO A DISTRACTION ON A DAILY BASIS OF HAVING TO TAKE YOUR EYES OFF THE ROAD WHEN DRIVING DURING THESE HOURS OR CONDITIONS. NOTE: I HAD A 2012 CHEVROLET COLORADO WITH THE AUTO HEADLIGHT FUNCTION AND HAD NO PROBLEMS WITH ITS FUNCTION BEING A DISTRACTION. IT FUNCTIONED PROPERLY. I HAVE CONTACTED GM WITH NO RESPONSE FROM THEM WITH A SOLUTION TO THIS SAFETY ISSUE.

UPON ENTERING MY VEHICLE, I NOTICED A COMPUTER MODULE HAD FALLEN OUT OF THE DRIVERS SIDE DASH AND WAS RESTING ON THE ACCELERATOR PEDAL. UPON FURTHER EXAMINATION, IT APPEARS THIS MODULE WAS HELD IN PLACE BY TWO SIDED TAPE WHICH FAILED TO SECURE THE UNIT. THE WIRES ATTACHED TO THE UNIT WERE LONG ENOUGH TO BLOCK ACCESS TO BOTH THE ACCELERATOR AND BRAKE PEDAL. THEREFORE, IT IS MY CONCERN THAT HAD THIS UNIT FALLEN OUT WHILE THE VEHICLE WAS IN MOTION, ACCESS TO THE BRAKE AND/OR ACCELERATOR PEDALS COULD HAVE BEEN IMPEDED AND AN ACCIDENT CAUSING SERIOUS INJURY OR FATALITIES COULD HAVE OCCURRED.