← New search

2023 Acura Integra

Owner reports · Recalls · Investigations

More warning signs than most Integra years

Owner complaints for the 2023 Acura Integra are substantially higher than the model-year median of 21.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Integra years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 4 of 207 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Steering. Review the 188 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Lane Departure. Review the 12 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Engine. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

5 crash reports0 fire reports2 injury reports

Steering complaints

188 reports
Clear category filter
Mileage unknown · Oct 28, 2023
Power TrainSteering

At speeds around 40-50, the steering begins to 'stick' and makes it harder to drive smoothly and autocorrects. At lower speeds it isn't noticeable. It also just started happening why I hit 2,700 miles on the odometer.

NHTSA ODI #11552437

Mileage unknown · Oct 28, 2023
Steering

When going over 30mph, the steering wheel will freeze into a static position, requiring a few pounds of force to unstick it and steer again - similar to the force needed to interrupt lane assist. This happens consistently for several days, then will stop for a few days, then start for several days again. Because it sticks, it is…

Read full complaint

When going over 30mph, the steering wheel will freeze into a static position, requiring a few pounds of force to unstick it and steer again - similar to the force needed to interrupt lane assist. This happens consistently for several days, then will stop for a few days, then start for several days again. Because it sticks, it is impossible to smoothly make adjustments while driving. Instead, every time I unstick it, the wheel turns slightly more than I want, causing an extremely unsafe situation, particularly when traveling at high speeds. It also stuck while I was parked with the car on, recently - but that’s the first time it has happened when not driving. It sticks the worst between 30-50mph.

NHTSA ODI #11552429

Mileage unknown · Oct 28, 2023
Steering

the steering wheel is sticky (getting stuck)

NHTSA ODI #11552390

Mileage unknown · Oct 24, 2023
Steering

When I am driving in a highway or road at about 40mph and higher my steering wheel “locks” when I try to do minor adjustments. Whenever I drive straight and have to readjust I have to jerk the steering wheel. After I jerk it its smooth however if I drive straight again it “locks again”. It is very uncomfortable and unsafe. It al…

Read full complaint

When I am driving in a highway or road at about 40mph and higher my steering wheel “locks” when I try to do minor adjustments. Whenever I drive straight and have to readjust I have to jerk the steering wheel. After I jerk it its smooth however if I drive straight again it “locks again”. It is very uncomfortable and unsafe. It also locks in place when you do a long curve since you leave your steering wheel in place after you try to readjust to the straight road the steering feels “sticky”.

NHTSA ODI #11551721

Mileage unknown · Oct 24, 2023
Steering

While driving in a straight line, steering catches or sticks when trying to make small steering adjustments from side to side. Most noticeable at highway speeds. More than normal force is required to adjust steering either direction. Feels a bit unsafe on the highway due to constantly fighting the steering. There have been n…

Read full complaint

While driving in a straight line, steering catches or sticks when trying to make small steering adjustments from side to side. Most noticeable at highway speeds. More than normal force is required to adjust steering either direction. Feels a bit unsafe on the highway due to constantly fighting the steering. There have been no warning lights or notifications in the vehicle. I live 400 miles from the nearest Acura dealer so unable to take it in. I’ve reported the issue to Acura customer service but they’ve not been helpful. I took it to a nearby Honda dealer but they can’t work on it without Acura’s blessing.

NHTSA ODI #11551640

Mileage unknown · Oct 23, 2023
Steering

I have a 2023 Integra A-Spec 6MT with about 7500 miles. I've been experiencing a "sticky" steering problem over the last 3-4 weeks. I mainly notice it while driving in the 45-55 MPH range on a straight newly-repaved state highway near my home in Wake Forest, NC. I've tried disabling the power steering and LKA options, and switch…

Read full complaint

I have a 2023 Integra A-Spec 6MT with about 7500 miles. I've been experiencing a "sticky" steering problem over the last 3-4 weeks. I mainly notice it while driving in the 45-55 MPH range on a straight newly-repaved state highway near my home in Wake Forest, NC. I've tried disabling the power steering and LKA options, and switched between Sport, Normal, and Comfort modes. In all cases, as I'm driving straight and try to make a small steering adjustment, I feel a gap and then a bump on the steering. I need to make an extra push on the steering wheel beyond the bump to make the turn or adjustment. When I got home yesterday, I actually noticed a similar "gap" when I turned the wheel at full stop in my driveway. This problem occurs regularly after 10-15 minutes of driving. Once it starts, it remains even at lower speeds.

NHTSA ODI #11551297

Mileage unknown · Oct 19, 2023
Steering

When driving straight at speeds above 45 MPH the steering locks or freezes up and requires additional force to move at which point it loosens and over corrects. It has happened periodically over the 10k miles I have had it, purchased new, but lately is happening very frequently as in every minute. I have also experienced the …

Read full complaint

When driving straight at speeds above 45 MPH the steering locks or freezes up and requires additional force to move at which point it loosens and over corrects. It has happened periodically over the 10k miles I have had it, purchased new, but lately is happening very frequently as in every minute. I have also experienced the wheel jerk the wrong direction while in a turn. This has happened maybe 6 times over that 10k miles but is very scary. These issues to me do not feel like mechanical issues and rather software/technological in nature.

NHTSA ODI #11550918

Mileage unknown · Oct 16, 2023
Steering

A momentary increase in steering effort (described as "sticky steering") that occurs mostly at highway speeds after driving for a certain amount of time.

NHTSA ODI #11550226

Mileage unknown · Oct 15, 2023
Steering

Especially when it is cold out, the steering becomes very sticky. This is mostly noted when traveling straight and need to make small adjustments in a lane. It almost feels like it pops and breaks free. I had brought it up to my dealer and they claim they didn't feel anything and have not heard of this issue

NHTSA ODI #11550012

Mileage unknown · Oct 13, 2023
Steering

When driving at interstate speeds the steering wheel feels like it gets 'stuck'. If you try to make a small correction within your lane, or if you try to change lanes there is a sensation that the wheel is 'stuck' requiring me to apply more force to move the wheel, then you will feel the resistance break and the steering returns…

Read full complaint

When driving at interstate speeds the steering wheel feels like it gets 'stuck'. If you try to make a small correction within your lane, or if you try to change lanes there is a sensation that the wheel is 'stuck' requiring me to apply more force to move the wheel, then you will feel the resistance break and the steering returns to a normal feel. It used to only happen when driving in a straight line for a period of time, but now if I'm going around a long curve on the interstate and go to straight the wheel back out at the end of the curve I can feel the steering wheel jump back to center without my input. My Integra has about 4500 miles on it. This issue began about 2 weeks ago. I have reported the issue to the dealer I bought the car from and their service department has looked at it and said they could not reproduce the issue. I asked a salesman to drive it and he noticed it right away and left the car running so that the service manager could drive it and he did, but he said he didn't notice anything. There have been no l warning lights from the vehicle and no trouble codes stored by the vehicle.

NHTSA ODI #11549851

Official recalls

2

24V744000 · Steering

Oct 3, 2024

Honda (American Honda Motor Co.) is recalling certain 2023-2025 Acura Integra, Civic Type R, CR-V Hybrid, CR-V, HR-V, 2022-2025 Civic, Civic Hatchback, 2024-2025 Acura Integra Type S, 2025 CR-V Fuel Cell EV, Civic Hybrid, and Civic Hatchback Hybrid vehicles. The steering gearbox assembly may have been manufactured incorrectly, which can cause excessive internal friction and lead to difficulty steering the vehicle.

Consequence & remedy

Consequence: Difficulty steering can increase the risk of a crash.

Remedy: Dealers will replace the worm gear spring and redistribute or add grease as necessary, free of charge. Owner notification letters were mailed November 18, 2024. Owners may contact Honda Customer Service at 1-888-234-2138. Honda's numbers for this recall are SJS, MJU, QJT and VJV.

23V430000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module

Jun 15, 2023

Honda (America Honda Motor Co.) is recalling certain 2023 Civic, Acura RDX, Acura Integra, and 2022 Honda Accord vehicles. A ball valve in the vehicle stability assist (VSA) modulator may leak brake fluid, which can result in unintended vehicle movement when the brake hold feature is engaged or an unexpected increase in brake pedal travel.

Consequence & remedy

Consequence: Unintended vehicle movement or an unexpected increase in brake pedal travel can increase the risk of a crash or injury.

Remedy: Dealers will replace the VSA modulator, free of charge. Owner notification letters were mailed July 24, 2023. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are OEJ, XEK, AEY, XEX and OEW.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA23003 · Momentary Increased Steering Effort

Opened Nov 29, 2023 · Closed Jan 28, 2025

Status: closed (inferred from source dates) · Steering

On November 29, 2023, the Office of Defects Investigation (ODI) opened this Engineering Analysis (EA23003) to assess allegations of momentary increase in steering effort in model years (MY) 2022-2023 Honda Civic, 2023MY Honda CR-V, and 2023MY Acura Integra vehicles (subject vehicles). The complaints received by ODI alleged that the subject vehicles experienced a momentary increase in required steering effort (described as “sticky steering”) occurring mostly at highway speeds after driving for an extended amount of time; these complaints could not be duplicated during dealer service technicians’ quick test drives.  The complaints had been received over the previous two years with most occurring with low vehicle mileage. The steering gear of these vehicles is aided by an electrical power assist unit. This power assist unit inputs force on the steering rack via a worm gear and worm wheel assembly. During PE23005, Honda stated this condition of momentary increase in steering effort occurs due to two factors within this power assist unit. First, during manufacturing, the steering worm wheel goes through annealing and component conditioning processes. These processes cause internal stress and strain within the steering worm  wheel. This strain is slowly released over the first few months of the vehicle life. Over time, the released strain causes deformation of the teeth on the worm wheel, causing the worm gear to catch on the worm wheel. This catching results in the driver’s momentary increased steering effort. Second, the manufacturing process did not guarantee consistent grease application and, therefore, some subject vehicles received insufficient grease which contributed to the momentary increase in steering effort. During EA23003, ODI further analyzed the potential safety related consequences of the momentary increase in steering effort. NHTSA’s Vehicle Research and Test Center (VRTC) duplicated the allegations of increased steering effort. In addition, VRTC discovered the steering worm wheel and worm gear tended to push grease out of the meshing area, resulting in large amounts of grease resting on top of the worm wheel. Information Request responses collected and reviewed by ODI showed Honda had also discovered this additional root cause during NHTSA’s EA. In addition, Honda discovered the preload of the worm wheel gear spring was set too high, increasing the gear slide load and resulting in higher friction and increased torque fluctuation when steering. The number of consumer complaints made to ODI continued to increase with the expansion of scope from the PE to the EA. Additionally, during EA23003, ODI received ten complaints alleging a crash, in addition to the 13 complaints ODI had received as of the time it opened EA23003. In total, 23 crashes have been reported to ODI due to this alleged defect. On October 3, 2024, Honda filed NHTSA Recall No. 24V-744 to address this defect. The recall will provide consumers with a new steering worm wheel gear spring with a decreased load. Additionally, dealerships will add additional grease and relocate any grease sitting on top of the worm wheel back into the meshing area. The scope of this recall includes all Honda vehicles that were manufactured with this specific improperly produced steering worm wheel and spring. In view of the recall action being taken by Honda, ODI is closing EA23003. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.